Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

  • Root login issue

    ryecoaaron - - General

    Post

    Quote from Jieta25460: “I didn't touch anything when I don't have knowledge. ” I'm just speculating. Maybe it happened accidentally. I've never seen root locked out like this. auth.log wasn't helpful either. What about: ls -al / sudo su -

  • Those all look fine (you could have run the command I posted to get it all in one ) I should have looked at your /proc/mdstat more carefully. Your array assembled but was in auto-read-only. Did you every try mdadm --readwrite /dev/md127?

  • Root login issue

    ryecoaaron - - General

    Post

    Quote from Jieta25460: “The password has been changed but the page is refresh like I never do something ... ” What is the output of: sudo tail -n20 /var/log/auth.log

  • SnapRaid + UnionFS NAS with 2 disks

    ryecoaaron - - General

    Post

    Snapraid is like raid 5 (or 6) and needs at least 3 drives. If you only have two drives, you would be better offer to have a scheduled rsync to sync the two drives together. With unionfs, you would never want your parity disk in the pool. So, if you want backup (highly recommended), you shouldn't pool anything until you get more drives.

  • Root login issue

    ryecoaaron - - General

    Post

    Quote from Jieta25460: “Before do anything else are you sure there isn't anything else to do to create a root user ? ” The root user always exists. If you can't login as root via ssh, that is not because the root user does not exist. If you can't login locally with the root user, you have the wrong password. So, that is why I said you should reset the root password. Quote from Jieta25460: “Just add it in sudo group, no file should be modified ? ” Giving a user sudo privileges is not that same as…

  • Quote from ananas: “if the array is recognized, then the ZFS signatures on the member disks can not be the issue. ” Not quite true. With Debian 8 (OMV 3.x), mdadm didn't seem to care if there was a zfs signature on the disk(s). With Debian 9 (OMV 4.x), this changed and it did affect assembling. Quote from ggibeau: “root@omv2:~# wipefs -n /dev/md127 ” Can you post the wipefs command I asked for? A bad signature wouldn't be on the array since it has already been assembled. It would be on the physi…

  • Root login issue

    ryecoaaron - - General

    Post

    Quote from Jieta25460: “I tried your commands on the server (there is a problem with ssh connection (acces denied) but in local it work. You will find photos with previous commands. ” That is very strange output. First, lsb_release should exist. Second, your sshd config is missing the PermitRootLogin line that OMV writes. That makes me think OMV has never written the config file. Third, your Jean user has full sudo privileges. So, you should be able to fix things without the root account. sudo p…

  • Quote from hyperg: “does not change the issue, same error message... ” It is a networking problem then since it still can't resolve dns. Does the system resolve dns when it is set to dhcp?

  • Quote from Aiakos: “Okay, I will reanable the plugin and in future I will check the file after any updates I perform and any changes I make in the plugins config... ” It would be interesting to see how it changes. While I'm not sure I can do anything to fix it in the plugin, it might be possible.

  • Root login issue

    ryecoaaron - - General

    Post

    Quote from Jieta25460: “I know used a desktop environment on the box isn't recommended but it's simpliest for me to do like this. This is the output of command lines. ” It was confusing whether you were posting the output from the client or the server. The commands I wanted you to run are meant to be run on the server. I see now that your client has a desktop environment. I missed the part that you mounted the disk on the desktop. There should be no need to do this. If you could access the OMV w…

  • Root login issue

    ryecoaaron - - General

    Post

    Quote from Jieta25460: “This is what I have obtained with the df -h command ” The root filesystem isn't full but it sure looks like you are using Ubuntu and you are definitely running a desktop environment on the box (which is not recommended). What is the output of: lsb_release -a grep PermitRootLogin /etc/ssh/sshd_config sudo -l

  • Quote from ggibeau: “I needed to get to my data - so I reinstalled 3.0.99 and my raid files are all there ” Did you look at the link ananas posted? I would curious to see the output of: wipefs -n /dev/[bcde] (no, it won't wipe anything)

  • Your DNS needs to be set. It can't resolve domain names. See problem #6 Solutions to common problems

  • Quote from Aiakos: “The path is the one that has been used more often in the past (see pictures above). I don't care which path it is, as long as it's always the same one. ” The only things that will re-write that file are installing/updating the plugin and making a change in the plugin. But they should be the same unless something has changed with the filesystem.

  • Quote from ellnic: “if you’ve left Windows behind you won’t be looking at those numbers ” If only we could get more people to do that

  • Quote from Aiakos: “I do also use the LUKS plugin for the backup HDD and unlock it after restart by entering the passphrase in the OMV UI. Can this have any influence on the path? ” I don't think so unless it was a different drive. Is the path in the grep command correct?

  • Docker GUI plugin now stable

    ryecoaaron - - Plugins

    Post

    Quote from hoppel118: “Yes, but I don't need all the features from the portainer web ui, which make the docker thing more complicated. I am absolutely satisfied, with what we have at the moment. ” What we have at the moment may break and we don't really have anyone who wants to maintain it. Personally, I don't think the portainer web ui is that much more complicated, it is just different. So, the reason to move to portainer isn't for features, it is for support. Quote from hoppel118: “why I thin…

  • full system backup

    ryecoaaron - - General

    Post

    Quote from afroman: “Why wouldn't this work? ” It would but that plugin (I wrote it) backs up the entire OS filesystem.

  • Share folders for others

    ryecoaaron - - General

    Post

    Quote from alexthunderstorm: “Is it right that there is no file manager and one has to use e.g. Midnight Commander over SSH? ” There is no native OMV web based file manager. You can use mc but you can also use winscp, samba, nfs, and various other web based filemanagers installed with the nginx plugin. The biggest problem with a web based file manager is it basically needs root permissions to do everything you want and that would be dangerous. Why do you need a web-based file manager?

  • Quote from ellnic: “At least if you moved from Win to Linux you don’t have 2 different figures staring at you. ” Actually you do have different figures since Windows shows in GB/TB and the OMV web interface is showing GiB/TiB. This has confused quite a few people new to OMV. I don't have any ideas to make this better other than if you are using ZFS, pay attention to the unit it is using