Search Results

Search results 1-20 of 67.

  • The only thing I did was switching it on in OMV's network settings and it works. Btw, my main installation is OMV 2.x with backports kernel but I have a second system with OMV 3.x. Both 'normally' work. Sometimes my 2.x system did not wake up via WOL and I had to switch it on using the power button. Sometimes that just did the trick and sometimes I had to plug in a monitor and keyboard for debugging. Then it worked immediately though. I have the strange feeling that plugging in a USB keyboard ju…

  • UFW or iptables from commandline

    SlashOpt - - Network

    Post

    If you want to connect to the OMV box via OpenVPN you need to open port 1194 in the firewall settings. Or did I misunderstand your description?

  • PuTTy (newbie) question

    SlashOpt - - SSH

    Post

    As you re-installed OMV: forgot to enable SSH in the Services->SSH section? Permit root login?

  • openmediavault-letsencrypt

    SlashOpt - - Plugins

    Post

    Quote from arm1e: “Setup new omv instance and installed lots of plugins, but the letsencrypt one does not open, just stays on the page for the previous plugin, even though the let encrypt one is selected. I have reinstalled and rebooted several times but no improvement? The plugin works fine on my other machine.” Hi, I once faced the same issue (I think I also posted about it earlier in this thread). The plugin worked perfectly on my virtual system I use to test things but on my main system it s…

  • openmediavault-letsencrypt

    SlashOpt - - Plugins

    Post

    Quote from lulu99: “I now have also this error when I want to renew with an additional domain: >>> *************** Error *************** The configuration object is in use <<< ************************************* Any ideas? Regards lulu” The reason for this is that you have the certificate in use in OMV (I know, this is the reason why you use the plugin in the first place ) I faced the same issue and the way I resolved it is to switch OMV to use a self-signed certificate then (re-)create the LE…

  • openmediavault-letsencrypt

    SlashOpt - - Plugins

    Post

    The LetsEncrypt client is trying to verify that you are the owner of the given domains by placing some files in your webroot and then access it via http. It fails as it cannot access vhost1.tld/.well-known/acme-ch…gEKpZPYaz1ecmwkyRhiLl67OQ So it comes to the conclusion you are not the owner. That's the way LetsEncrypt works. So you just cannot place anything in the "domain" field. It must lead to a domain owned by you and be reachable via http://... for verification. At least that is my understa…

  • No WebGUI white blank page

    SlashOpt - - General

    Post

    So, the "only" problem is that the fastcgi_params directive is missing if ones uses the version from backports. Good to know ...

  • No WebGUI white blank page

    SlashOpt - - General

    Post

    If I recall it correctly I had a similar situation the other day and found that nginx was updated from the backports repo. So I had nginx version 1.6 instead of the "normal 1.2". I fixed it by downgrading to 1.2 (apt-get install nginx/wheezy nginx-full/wheezy). As you fixed your problem with changing the fastcgi config would you do me a favour and check your nginx version? Maybe I could have fixed my setup the same way ...

  • How do i use kodi headless?

    SlashOpt - - Plugins

    Post

    Quote from subzero79: “Another option of the headless kodi is that it also serves as a upnp server. So you can just fire a kodi instance in the network and it connects and the db is just there ready with content for playback. No sources or advancedsettings configuration.” Oh, thanks! Didn't know that ... Only used that docker image as a headless library scanner ....

  • How do i use kodi headless?

    SlashOpt - - Plugins

    Post

    Quote from happyreacer: “okay, i must setup my DB in Kodi or openelec to the OMV. That is all? ” I once used the docker image the way that I had a MySql DB on the OMV system and had both, kodi-headless and OpenElec use this DB. So it's kind of shared between the two clients. So kodi-headless does scan the movie files and creates the entries in the DB. You can even use the watchdog in the docker image so kodi-headless will (almost) immediately add a DB entry for a new movie added to the filesyste…

  • How do i use kodi headless?

    SlashOpt - - Plugins

    Post

    Hi, nothing kodi-headless is meant to be a "headless library scanner" meaning it can scan your files and add them to a MySql DB so your client like a Raspberry PI with OpenElec does not have to do it. So it helps moving some load off of the Raspberry, ... Playing the files is still done via the above mentioned OpenElec client or something different.

  • configure local proxy

    SlashOpt - - Network

    Post

    @votdev: great to hear that OMV3 will have "built-in proxy support" @Zonk: I usually add the proxy config to the following files: /etc/environment Source Code (4 lines) and add a file /etc/apt/apt.conf.d/02proxy with this content: Source Code (2 lines) of course you need to change host:port to your proxy config Most of the proxy requirements should be fulfilled with this. There might be stuff which might need additional config (maybe wget, curl, ...) but most are able to use the config from /etc…

  • Quote from acta44: “Great ! it worked ! Thank you all for helping out. SlashOpt, is that you can explain to me what has been a problem ... do I have removed a module or is it just a bug? Thanks again !” So you renamed the file and afterwards the GUI worked again? Then yes, you disabled something and you need to fix that! I don't know where 'sub.conf' comes from but I assume that some plugin has put it there to add a management page (or something like that) to the web server config. Maybe you can…

  • Quote from acta44: “Thank you for your answers. I use OMV 2.1 (memory) with some plug-ins: Sabnzb, Transmission, Plex, etc. I want to try to move the specified file but command line is not too much in my skills ... could you tell me what to do?” You do have access to the commandline via ssh or directly on the console of your OMV system, don't you? so log in as root and issue: Source Code (3 lines) Then this file is disabled. Nginx need to re-read the config so the last command should do that (I …

  • According to the message it is the directive proxy_set_header in the file /etc/nginx/openmediavault-webgui.d/sub.conf. I would move away the file from the directory. If that fixes the problem you need to find out what is the purpose of the file. Btw, I do not have the file so I assume it is something added by a plugin. Check the directive and try to fix it. Just my two cents

  • openmediavault-letsencrypt

    SlashOpt - - Plugins

    Post

    Quote from ryecoaaron: “Quote from SlashOpt: “ Edit: ok, there is no earlier package on packages.omv-extras.org available, so I cannot give that a try :-(” I just put all the versions in the testing folder.” Aaron, thanks a bunch for the earlier packages! Unfortunately that didn't work either It must be something different in the backend. My VM was installed from scratch directly from a 2.x ISO where as my 'production' system evolved from 0.4 to 0.5 to 1.x to 2.x via dist upgrades. Maybe that's …

  • openmediavault-letsencrypt

    SlashOpt - - Plugins

    Post

    Hi, I just installed the plugin and do also face the problem that clicking on the 'Let's Encrypt' service entry does not show anything (better said, it is still showing what was displayed before clicking the entry) and that there's an error "TypeError: t is null". I'm not sure what is causing this. I do have a VM where it works as it should. The only difference is, that I have installed the plugin in the VM using an earlier version and I updated it to the latest version (don't know if that makes…

  • Problem with the WebDAV mount

    SlashOpt - - General

    Post

    glad you solved it! Curious, I never had problems with the BPO kernel. Maybe some kernel module is missing on your install..!? I never tried mapping a webdav share with my Pi system but that's not the point anyway Maybe you could give it a try re-installing the BPO kernel if that makes a difference ...

  • Problem with the WebDAV mount

    SlashOpt - - General

    Post

    Hi, what kernel version are you using on the two systems? Are they the same? That might be a pointer ... Also, is the package davfs2 the same version? Regards

  • Great guide! One remark: Source Code (1 line) should be Source Code (1 line) shouldn't it?