Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Quote from Njuilpo: “And confirm that it will fit in the RockPro64 case. ” Just about any low profile card will work.

  • Quote from ggibeau: “Shows active raid5 now rebooted ” Your array was fixed with the command but after rebooting, it is probably going into auto-read-only again. This generally happens when something is wrong with the array/drive in the array. I would fix it with the readwrite command again and then omv-mkconf mdadm. Leave the system on for a while to make sure everything is happening on the array that needs to happen.

  • Quote from dziekon: “Feel free to review my code here ” That is an impressive amount of work. We appreciate all the help we can get

  • Quote from Nefertiti: “2 are listed one 64 the other plain armhf what are the differences? ” One is 64 bit and the other is 32 bit. If you don't have a reason to use one or the other, then follow ayufan's advice when he says the 32 bit (armhf) offers the best compatibility. Quote from Nefertiti: “Any advices in term of add on like Emmc Or other parts? ” I don't use emmc on mine because it really doesn't make a difference. What other parts are you looking at?

  • Build a low-power NAS with a SBC

    ryecoaaron - - My NAS Build

    Post

    Quote from Njuilpo: “I read that the RockPro 64 is a nice board and it could do the job for my NAS. Combined with this case pine64.org/?product=rockpro64-metal-desktopnas-casing it seems a good solution to me. ” I have both. It is a nice setup. Quote from Njuilpo: “For the SATA part, Pine64 sells a PCI-E to SATA adapter but I also read a post from @tkaiser pointing to a good one sold on ebay, so I would like some advice. (because buying all at the same shop reduces shipping costs) ” Go with his …

  • omv-extras - ca-certificates error

    ryecoaaron - - Plugins

    Post

    Why not just enable ntp from the omv web interface (System -> Date & Time tab)? That is one of the first things I do when setting up a new system. Glad it is fixed though.

  • If /proc/mdstat still shows the array in auto-read-only mode, now would be the time to execute the mdadm --readwrite /dev/md127 command. After that post, the output of cat /proc/mdstat again.

  • omv-extras - ca-certificates error

    ryecoaaron - - Plugins

    Post

    If you search the forum, you will see this come up from time to time. I still don't know what causes it (it isn't omv-extras) or how to fix it. Maybe one of the suggestions in those other threads will work on your system but they haven't worked on the other systems.

  • ZFS and iSCSI

    ryecoaaron - - RAID

    Post

    Did you disable backports? This can be done in omv-extras.

  • Quote from ggibeau: “Run the command you referenced - from telnet "mdadm --readwrite /dev/md127" Reboot File System same - - not mounted and Missing Any other thoughts? Or should I just go back to 3.x and be happy. ” That command can only fix an array in auto-read-only mode. What is the output of: cat /proc/mdstat I also assume you rebooted after moving to OMV 4.x? Do you have the 4.18 kernel installed?

  • Quote from ggibeau: “do you think it would have worked? ” Probably. That is what the command is supposed to fix. Quote from ggibeau: “root@omv2:~# wipefs -n /dev/[bcde] wipefs: error: /dev/[bcde]: probing initialization failed: No such file or directory root@omv2:~# ” I had a typo in my post. It should be wipefs -n /dev/sd[bcde]

  • Root login issue

    ryecoaaron - - General

    Post

    Quote from Jieta25460: “Ok thank you but so close I need to change usb key every 4 months ... I can use the garantee of the product ^^. ” I have a usb stick in one server that has been running of it for over three years. Quote from Jieta25460: “because if I reinstall all the OS and create the same folder I will not found the old data. ” The data will still be there but could have wrong permissions if the user IDs are different.

  • Root login issue

    ryecoaaron - - General

    Post

    I agree you should re-install. Use OMV 4.x as well. You can use a usb stick (make sure it is new) as long as you have the flashmemory plugin installed like you did previously.

  • Root login issue

    ryecoaaron - - General

    Post

    You should be able to look at dmesg as a regular user. Did you install this setup from the OMV iso? What is the output of sudo dmesg | tail -n10 I'm really starting to wonder if you system has been hacked or if the install media is failing. Is it on the internet?

  • Root login issue

    ryecoaaron - - General

    Post

    Quote from Jieta25460: “It's strange ... when I install omv in june I had root access ... ” Something has happened to the system since then. I'm running out of ideas but: ls -al /bin/bash dmesg | tail -n10

  • Root login issue

    ryecoaaron - - General

    Post

    Quote from Jieta25460: “I didn't touch anything when I don't have knowledge. ” I'm just speculating. Maybe it happened accidentally. I've never seen root locked out like this. auth.log wasn't helpful either. What about: ls -al / sudo su -

  • Those all look fine (you could have run the command I posted to get it all in one ) I should have looked at your /proc/mdstat more carefully. Your array assembled but was in auto-read-only. Did you every try mdadm --readwrite /dev/md127?

  • Root login issue

    ryecoaaron - - General

    Post

    Quote from Jieta25460: “The password has been changed but the page is refresh like I never do something ... ” What is the output of: sudo tail -n20 /var/log/auth.log

  • SnapRaid + UnionFS NAS with 2 disks

    ryecoaaron - - General

    Post

    Snapraid is like raid 5 (or 6) and needs at least 3 drives. If you only have two drives, you would be better offer to have a scheduled rsync to sync the two drives together. With unionfs, you would never want your parity disk in the pool. So, if you want backup (highly recommended), you shouldn't pool anything until you get more drives.

  • Root login issue

    ryecoaaron - - General

    Post

    Quote from Jieta25460: “Before do anything else are you sure there isn't anything else to do to create a root user ? ” The root user always exists. If you can't login as root via ssh, that is not because the root user does not exist. If you can't login locally with the root user, you have the wrong password. So, that is why I said you should reset the root password. Quote from Jieta25460: “Just add it in sudo group, no file should be modified ? ” Giving a user sudo privileges is not that same as…