Search Results

Search results 1-20 of 28.

  • Hello I reinstalled OMV and corrected my issues. Before reinstalling I saved the configuration using the back up 3.11 plugin Now I want to reload the configuration but can't seem to find out where to start Thanks

  • Lost Raid 5 Array

    Extruckie - - RAID

    Post

    I found that the issue of not being able to access the webgui is a Chrome issue. I can access thru another browser. I tried to unmount the array without success, the only thing I can think is that I am not doing something correctly

  • Lost Raid 5 Array

    Extruckie - - RAID

    Post

    I changed the status back to active. I have 2 issues I can't seem to resolve. 1) after system boot I get an email This is an automatically generated mail message from mdadmrunning on openmediavaultA SparesMissing event had been detected on md device /dev/md0.Faithfully yours, etc.P.S. The /proc/mdstat file currently contains the following:Personalities : [raid6] [raid5] [raid4] [linear] [multipath] [raid0] [raid1] [raid10] md0 : active (auto-read-only) raid5 sdd[2] sda[0] sdc[3] sdb[4] 586015027…

  • Lost Raid 5 Array

    Extruckie - - RAID

    Post

    Update: New drive arrived today. It is installed and the array is in the process of rebuilding. Thanks again to Votdeb and SerErris for your input.

  • How do I keep my screen on?

    Extruckie - - General

    Post

    Thanks I used the following. The reason I used this one is that it reminded me how to edit the /etc/default/grub file askubuntu.com/questions/138918…eensaver-on-ubuntu-server It worked Thanks again

  • How do I keep my screen on?

    Extruckie - - General

    Post

    My Bad My monitor is connected to a box I now use as a server. It was my old desktop. My hardware is in my signature. I boot the server and after it comes in about 5 min the screen goes dark. I have an upcoming project that I wish to keep the screen on longer while I am running. After that I wish to reset it as it is now.

  • How do I keep my screen on?

    Extruckie - - General

    Post

    Hello I want to be able to keep my screen on my OMV Box on So I can monitor it. How do I do that?

  • Lost Raid 5 Array

    Extruckie - - RAID

    Post

    Success! That took care of it. had to turn off the array with mdadm stop cmd. Restarted with mdadm. it skipped the bad drive and everything is back. I rebooted the OMV box and it came up with a degraded raid . I can now access the raid array and map to the shared folders on it. Thanks Votdev and SerErris for your input.

  • Lost Raid 5 Array

    Extruckie - - RAID

    Post

    Thanks. I ordered a new drive and will restart the array later today. I will post anything else I’m not sure if it’s current. But there is nothing that I don’t have elsewhere

  • Lost Raid 5 Array

    Extruckie - - RAID

    Post

    Thanks I don't have time to do it now. I will have to wait until I get back home from work. I do have one question, Can I do it with the failing drive in place or wait until I replace it?

  • Lost Raid 5 Array

    Extruckie - - RAID

    Post

    Here is the output of the script Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : inactive sdb[0](S) sda[1](S) sdc[3](S) sdd[2](S) 7813534048 blocks super 1.2 unused devices: <none> Looks like OMV doesn't see the drives They show up on under the disk screen. I have attached images of the disk screen and the smart screen. Sorry for duplicate post. I got an error when I posted it and didn't think it went thru. I quit after second error

  • Lost Raid 5 Array

    Extruckie - - RAID

    Post

    DOH!!! I did. I will have to do it after work

  • Lost Raid 5 Array

    Extruckie - - RAID

    Post

    Quote from votdev: “How is the output of Shell-Script (1 line)” I entered this into the box thru putty and the cursor just sits there. After i restarted the machine i got the following emails Does not exist Service php-fpm Date: Wed, 25 Jul 2018 05:32:21 Action: restart Host: openmediavault Description: process is not running Your faithful employee, Monit Exists Service php-fpm Date: Wed, 25 Jul 2018 05:32:52 Action: alert Host: openmediavault Description: process is running with pid 770 Your fa…

  • Lost Raid 5 Array

    Extruckie - - RAID

    Post

    I have an array of 4 disk identical 2TB disks. I installed a new network card to speed up the data transfer on my OMV box. After installing it I got a lost disk error and it would lock up the machine. I removed the card and now I cannot access the array. I can see all 4 disks on the Interface but not under the raid screen. When booting the machine I get "A start job is running for dev-disk-by.xxx" with a 90 second timer. I guess below is the real trouble. How do I restore me array in an degraded…

  • OK real communications are occuring from the OMV Box. I got this today /etc/cron.weekly/openmediavault-update-smart-drivedb: mesg: ttyname failed: Inappropriate ioctl for device. It is a new one, ever since the upgrade to 4.x

  • It was. I just checked and yes it is.

  • Hello I stopped getting notification of pending updates since upgrading to 4.X. I have to manually check and install any updates. How do I correct it? I do not see anywhere one could change update settings. Thanks all

  • Install issues using .iso

    Extruckie - - General

    Post

    Thank you again I never would have been able to figure that out!!

  • Install issues using .iso

    Extruckie - - General

    Post

    A fine Gentleman from Germany got my problem solved. I am now a happy camper

  • Install issues using .iso

    Extruckie - - General

    Post

    Hello I have used OMV for over a year until last January 31, when we had a fire that damaged our apartment. I at the time was running OMV 2.x and had a very stable install. I recently got my OMV server back up this weekend. I downloaded 3.0 and installed it. I am having several problems with plugins and such. I do have the OMV box configured for SMB/CIF and that is working fine. I tried to remove the openmediavault-extras plug in and get this error Failed to execute command 'export PATH=/bin:/sb…