Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

  • And did you check which IP had been assigned to the Pi according to your router? In the past there have been issues that the IP shown was not correct. EDIT: probably not the problem as there is a nginx error

  • OMV fails to start a web server

    macom - - General

    Post

    Cannot access web gui on new OMV_4_Raspberry_Pi_2_3_3Plus.img install

  • The post is a bit confusing. Do you have OMV-extras visible in the GUI? If yes: you need to enable the Plexmediaserver Repo in OMV-extras. If no: what is the output of dpkg -l | grep openmediavault

  • Did you take care of the notes on the SF page? sourceforge.net/projects/openm…/Raspberry%20Pi%20images/ On first boot the installation will be finished. REMAIN PATIENT PLEASE sincethis can take up to 20 minutes with a slow SD card and slow internetconnection (needs internet access to update all packages to latest version).After one automatic reboot SD card activity led stops blinking and then yourRaspberry Pi is ready! And did you check which IP had been assigned to the Pi according to your rout…

  • OMV does not update the firmware of the sata bridge. You have to do it following the instruction. Nice feature: you can set the spin down time of the drive.

  • Quote from syrusstk: “root password you set during the install ” That is the case when you install from an ISO. If you use an image, the credentials are given on the download page at SF: web interface: - username = admin - password = openmediavault console/ssh: - username = root - password = openmediavault Important note from SF: SSH login has to be enabled in web UI prior to usage: Services --> SSH --> Permit root login sourceforge.net/projects/openm…/Raspberry%20Pi%20images/ Also Important: On…

  • OMV - Resilio at startup

    macom - - General

    Post

    Quote from Nito: “Moreover, following your advice, I'm going to test the other option (systemctl) ” Have you been successful? Any problems?

  • Have you been able to solve your issue? If yes, please post the resolution here, so that others can benefit from it.

  • ICONs Missing

    macom - - General

    Post

    Might be something you need to ask in the Mint forums. forums.linuxmint.com/

  • How to clean recycle

    macom - - General

    Post

    Quote from whitetiger: “I think they are related to baskets that have not been emptied by cancellations. ” What do you mean with baskets? Do you mean these have been shared folders and you removed the shared folder in the GUI of OMV but not the content? In that case you can create new shared folders that are pointing to that folder. Then you delete the shared folder again, but this time you select "shared folder and content".

  • Im Dexxa, Im new here :-)

    macom - - Off-Topic

    Post

    Hi Dexxa, welcome to OMV. Glad to hear that your installation went well. In case you would like to invest in something more beefy than the RPi have a look here: Which energy efficient ARM platform to choose? OMV for RockPro64 (and other RK3399 devices soon)

  • ICONs Missing

    macom - - General

    Post

    Quote from cgerdes: “all the ICONs are missing ” Do you mean in the GUI of OMV or somewhere else?

  • OMV running on Orangepipcplus

    macom - - General

    Post

    One way is to use the backup plugin which then is using fsarchiver (or dd or rsync). But this is then a backup of a live system. Better than nothing, but not ideal. fsarchiver.org/live-backup/

  • Disk unmount after reboot

    macom - - General

    Post

    Quote from Adoby: “Try to disable ALL changes to Physical Disk Properties for the disk. (Disks -> Edit). ” At least in my case this is done. I did a fresh install and did not enable any of the settings. Unfortunately the disk still is sometimes not mounted after a reboot. Since I apply a "mount -a" it is fine.

  • In Debian Stretch (OMV4) the version of util-linux (including wipefs) is 2.29.2-1+deb9u1. Current stable version of util-linux is 2.32.1. In Debian this version is in the testing repo and has the following note for wipefs: Note that some filesystems and some partition tables store more magic strings on the device (e.g. FAT, ZFS, GPT). The wipefs command (since v2.31) lists all the offset where a magic strings have been detected. So new version with additional functionality. Debian is quite conse…

  • Have you tried if updating the firmware of the sata bridge helps? wiki.odroid.com/odroid-xu4/software/jms578_fw_update If not, might be worth a try. I assume the market for sataless HC1 is quite small

  • Problems with update SABnzbd

    macom - - Plugins

    Post

    The plugin has not been ported to OMV4. omv-extras.org/joomla/index.php/omv-plugins-4/4-stable Recommendation is to use Docker in cases where no plugin is available. Installation and Setup Videos - Beginning, Intermediate and Advanced

  • Aus dem anderen Thread (nachdem das raid in mdstat als "active" angegeben ist: omv-mkconf mdadm Leave the system on for a while to make sure everything is happening on the array that needs to happen. Hoffentlich funktioniert es bei dir.

  • Missing Clonezilla tab in backup plugin

    macom - - Plugins

    Post

    Kernel tab is in OMV-Extras forum.openmediavault.org/index…6bf0316517c9cf803192f95a6

  • @ananas: Du könntest hier vielleicht helfen.