Search Results

Search results 1-20 of 26.

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    Quote from woeklchen: “is there a default address where OMV bind to eth0: in image? ” Nope. Need recovery/debrick (But you can save main config for future reinstall). For WDMC Mirror available "miniOS" (Initrd with busybox, parted and mdadm).

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    Just for fun: DSM 6.0 available soon.- DSM 6 available for WDMC Mirror (Testing) - Debian (omv) available for test on WDMC Gen2 - DSM for WDMC Gen2 - soon.

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    - Fixed NFS and ftp. - rrdcached sometime take 90-100% CPU usage. Just disable statistics. - OMV v2.x works fine, include Plex from omvextras.org (But transcoding really slow - weak CPU). - Added Recoery to Initrd. HDD formating only if reset button presset (Press and hold Reset button when HDD led's blinking (1-2-1-2)). If something went wrong - start telnet server.

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    Quote from olfolfolf: “did someone try to install OMV on the My Cloud Mirror 6TB? Does it work?” Yes. (WDMC Mirror Gen1) Debian Jessie + OMV v3.0.13 works, but have few erros. (rrdcached take ~80% CPU usage, nfs and ftp daemons cant start, no network adapters in webgui and few other important, but not critical errors) Maybe later i build same for WDMC Gen2 and Mirror Gen2. But need real hardware for developing and tests. Maybe i build DSM5 (xpenology)... maybe... I'm not a enginer/programmer/dev…

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    synology.com/en-us/dsm/5.2

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    DSM have more functinalyty and better WebGUI. WDMC really weak for transcoding. But i try Plex - its works fine. Maybe Swap disabled or similar? Source Code (1 line) if empty, do this: Source Code (2 lines) and check /etc/fstab And... For streaming - use MiniDLNA. Its better.

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    DSM 5.2 Available (Need repart (format) HDD). Works good! Also i update Recovery software - now we have Parted inside for manipulate HDD (No need linux anymore for Unbrick or reflash firmware)

  • Lan speed

    Fox_exe - - Network

    Post

    Quote from kajzii: “uplod speed to NAS about 25MB/s, download speed about 38-40MB/s” Its normal for WD MyCloud (CPU: 2 cores, 650MHz). For better speed WD provide one trick - they use non-standart "Memory page size" with 64kb (4kb in normal kerel). Its unstable, but works. Without this patch Samba can get maximum ~50MB/s Download and ~30MB/s upload. Also connect shared folder as "Network drive".

  • WD My Cloud

    Fox_exe - - General

    Post

    Just follow instructions from my google.drive (Or search info on official WD forums) WD firmware dont have any HDD limitations, so you can use any of SATA-I/II/III HDD (Include DOM modules or SSD)

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    Quote from mushroom_daddy: “What should I do here?” Just ignore or replace/delete old ssh keys. About Minidlna - Omvextras.org have new version of minidlna, but not all dependencies for hem. Fix 1: Temporary add Jessie repo Fix 2: Disable omvextras repo, install old minidlna (from wheezy), then add omvextras repo again and install plugin. FIx 3: Report about this issue to omv-extras.org and wait fix.

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    Quote from mushroom_daddy: “root@MyCloud:~# cd /DataVolume/shares/Public/omv” There is no /DataVolume anymore. Use /media/*GUID* (where UUID is your hdd (partition) ID) About samba - Go to WebGUI and configure samba's shares.

  • Quote from bobafetthotmail: “I'm half sure that the WD mycloud is using the hard drives to store OMV.” All easy - WDMC have md/raid volume (Its software raid, so possible run raid 0 or 1 in 2 volumes on one HDD). OMV installed in this md/raid partition (And recognize md as different HDD). So data partition is available in GUI (And md partition too). * Im install debian first, then install OMV from official repo, it its importatnt...

  • Tehnically we need only 4 partitions: Kernel Rootfs Swap Data And, optional - bootconfig. But need store kernel on HDD because WDMC have microchip for bootloader only with 512KB (Yes, 0.5MB! Free space for bootscripts/configs = ~50-100kb) By default - Barebox (U-Boot v2.x alpha, Bootloader) load and execute bootscript from partition 7 and 8 (If first have errors).

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    All OMV builds can be updated to latest version via webgui or apt-get. Disk layout and other info available in Google.Drive folder. (See in Developing folder). Also i start porting Synology DSM to WDMC! (Kernel and initrd almost completed)

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    Only English and Russian questions please. About WDMC:- All useful info available in my Google drive folder - Bootloader dont support USB or any other boot devices. Only internal HDD and network boot via TFTP. - Kernel sources available, so possible to build any drives/modules. (Kernel version - 3.2.68) - Due compatability reasons i dont modify root partition, so we have only 2GB (Need move DLNA Cache and other data to Data partition. Info - in g.drive) - About "Root partition as data partition"…

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    No, WDMC dosn't support WOL.

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    New Release: OMV v1.16- Latest OMV and Software. - Latest Kernel (v3.2.68) - Better performance (Samba - up to 50MB/s w/o tuning @ v3.6.6!) - Possible suspend/sleep/hdd_spindown. (For 24/7 sleep - need disable daily cronjobs) - All plugins available now (Include precompiled iscsi-target kernel module. But in gui - only "BlockIO" available) - Small fixes and tuning in system.

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    Update! * OMV 1.11 * Kernel 3.2.40 + Modules * Omvextras.org plugins * Samba v4.13 * Transmission 2.84 - IScsi Target still wont work (Need recompile kernel module and remove linux-headers from dependencies) - WON not supported by hardware - Samba's speed still low

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    Default logins: SSH: root / mycloud Web: admin / mycloud

  • WD MyCloud

    Fox_exe - - My NAS Build

    Post

    Updated instruction. Now - its easy.