Search Results

Search results 1-20 of 847.

  • The Class E Network

    geaves - - Off-Topic

    Post

    Quote from flmaxey: “The router is the DHCP server and the DNS proxy. The router forwards DNS requests to the Pi-hole/Docker. Pi-hole forwards to unbound, on the OMV host. ” Your router obviously allows you to do that, but the BT Home Hub, is a complete lock down, it's plug and play for the masses my option would be to set DNS on each device leaving the satellite stuff alone. I have one other option, after a b'band problem last week I removed the Openreach modem which was originally used in fron…

  • Adding a Wi-Fi interface

    geaves - - Network

    Post

    Quote from Rimsonatoaster: “Daaaaamn. I never would have guessed (USB) Wi-Fi was such a big issue ” Only on Linux

  • Adding a Wi-Fi interface

    geaves - - Network

    Post

    Quote from Rimsonatoaster: “So i don't entirely know what I'm doing, but those posts did seem helpful. What sort of next steps should I consider taking? ” Basically what you're going to have to do is to download is the binary and build the driver, like you must have done before but you got errors when you ran make this the only way you're going to get this working. The problem you could run into is that link is for kernel 4.10, so will it work? -> don't know, that brandon bailey had a last commi…

  • The Class E Network

    geaves - - Off-Topic

    Post

    Option 3 whilst being a pita static ip addresses could be set for everything, except the satellite equipment. All the laptops, ipads, iphones could have static ip's, or go back to the router dhcp but assign pi-holes dns ip to them, except for the satellite equipment. The problem with my isp's router is the router is the best isp provided router on the market, but like all isp routers it's plug n pray so there are no networking settings to change, other than the ip address range. Most user's who …

  • The Class E Network

    geaves - - Off-Topic

    Post

    1 Forward 2 Back!! Had to go back to OMV's dhcp, my 2 satellite boxes won't connect to pi-hole's dhcp this could well it transmits *(it's ip address) as their computer name....angry ip scanner also doesn't detect them. They operate a 5Ghz mesh, even though they connect either by ethernet or wifi, that's the best part of the day gone

  • OMV 4 Docker "Dead"

    geaves - - Plugins

    Post

    forum.openmediavault.org/index…8367062570895582084442b9b How many times have heard that

  • OMV 4 Docker "Dead"

    geaves - - Plugins

    Post

    Have you enabled docker ce in omv extras before installing the plugin

  • The Class E Network

    geaves - - Off-Topic

    Post

    Ok have reinstalled Pi-Hole and set up dhcp, that works however unbound and pi-hole are becoming more difficult resolve. 1) In the unbound pi-hole.conf changed the port to 53 from 5353 as per the doc 2) Tried changing the custom dns to omv's ip 192.168.1.40, this is where it goes pear shaped, if I enter 192.168.1.40 hit save it appears back as 192.168.1.40#53 This still does not work for me, still getting dns_probe error, Enter the custom dns -> start unbound same dns_probe_bad_config Enter the …

  • OMV 4 Docker "Dead"

    geaves - - Plugins

    Post

    Quote from Chrisso: “I've followed the tutorial: ” You should try these guides by @TechnoDadLife they are more recent.

  • The Class E Network

    geaves - - Off-Topic

    Post

    Quote from flmaxey: “Come on... ” I knew you were being helpful, but you went for 'the bait' though Today will be reconfigure day, I'm determined to get this sorted!! I don't like feeling defeated

  • Adding a Wi-Fi interface

    geaves - - Network

    Post

    This post also quite long as it references a later kernel 4.10

  • Adding a Wi-Fi interface

    geaves - - Network

    Post

    Quote from Rimsonatoaster: “which I guess hasn't gotten support for the rtl8822bu chipset inside my new dongle. ” That is what is needed, Ok you obviously know what you're doing I found this last night read through from page 2 as it lead to this page from post 15 I don't know if that will work but worth a try.

  • Adding a Wi-Fi interface

    geaves - - Network

    Post

    Quote from Rimsonatoaster: “Its pulling up the keyboard I'm using and the USB drive I'm running omv off of. ” It should also give you information about the wifi dongle.

  • Adding a Wi-Fi interface

    geaves - - Network

    Post

    Quote from Rimsonatoaster: “The device is a WAVLINK Nano AC600. ” That could like finding a needle in a haystack....Ok what's the output of lsusb

  • Adding a Wi-Fi interface

    geaves - - Network

    Post

    Quote from Rimsonatoaster: “and it requires a device name, ” Ok would mean it has not been installed if it's the same as this image forum.openmediavault.org/index…8367062570895582084442b9b what's the make, model etc of the wireless dongle?

  • Adding a Wi-Fi interface

    geaves - - Network

    Post

    Ok that's a start, got to System>>>Network>>>Interfaces>>>Click on the Add drop down, and select WIFI, does a WIFI interface display (btw that may or may not work, wireless is not the preferred option for a nas)

  • Adding a Wi-Fi interface

    geaves - - Network

    Post

    Quote from Rimsonatoaster: “I cannot get the name of my wireless network adapter to pop up under "device" ” You may not get an answer, because I am confused by the above. If it's temporarily connected to Ethernet can you get to omv's gui?

  • The Class E Network

    geaves - - Off-Topic

    Post

    Quote from flmaxey: “Geaves: As you seem to be trying different settings - you probably already know this.... If you change unbound's config, it should to be followed by service unbound restart (or a reboot). Since it seems there may be some sort of problem, what does service unbound status show? ” Gosh, sorry teacher, I can assure you it won't happen again. 1) Yes, I'm not totally fik 2) Can't do that have gone back to the first option. 3) I fink it's gon pear shaped I'll try harder tomorrow

  • The Class E Network

    geaves - - Off-Topic

    Post

    Quote from ryecoaaron: “Sounds like something is seriously wrong with your pi-hole install. I would get it working (re-install?) with cloudflare or something before trying to switch to unbound. ” I don't mind doing a reinstall and switching everything to Pi-Hole, whilst it does work the fact that it will stop as if it's getting an update is disconcerting. I have also added a small drive specifically for Docker installs, but Pi-Hole is still on my OMV's flashdrive. Job for tomorrow when everyone'…

  • The Class E Network

    geaves - - Off-Topic

    Post

    Quote from ryecoaaron: “Enable DHCP in pi-hole. Settings -> DHCP lets you enable it. ” I tried that a couple of times and for some reason the settings would fail....like changing the custom dns entry first I tried 192.168.1.40#5353, then 192.168.1.40#53, saving after each change, then after your comment to not add the port reference 192.168.1.40>>>Save only for it to reappear as 192.168.1.40#53. The same happened when I tried to alter the dhcp scope, made the changes>>>Save but it displayed the …