Search Results

Search results 1-20 of 40.

  • Rsync between 2 OMV

    peleroform - - RSync

    Post

    that sound great. I will try later. I am now at home and have no connection to the work system. Is your tutorial for a real sync (deleting) between both systems or just a backup from A to B? Because in my situation, the files in both systems are changed - and so the systems should be on both ends up to date. if there is a way using the webgui only I would try that way first.

  • Rsync between 2 OMV

    peleroform - - RSync

    Post

    where do I see if pure rsync or ssh? I only worte it in the webgui. of the rsync plugin I do not need ssh.... only user and password is enough, but if possible and easier ... ssh also is good. the main reason is that it should be a safe connection.

  • Rsync between 2 OMV

    peleroform - - RSync

    Post

    Dear all, I know there are a lot of posts about rsync. I tried to get the right information, but it would not work. So the situation is: There are 2 OMV systems (home and work) I want to sync the files between both. The sync must be startet from the OMV at work. The mainfiles are at the home system. setup: home: shared folder: name: Files Volume: FS Path: / user: sync in the groups - users and ssh write and read privelegs on the folder Files rsync server: modules: Shared folder Files name SFiles…

  • Device with N/A capacity

    peleroform - - General

    Post

    It would be nice if you can post the what I should do. I looked in the forum but I could not find what you said. Maybe the wrong search words. Thanks for your help

  • Device with N/A capacity

    peleroform - - General

    Post

    Thanks at first, The SMART problem is, when I try to open in the WEBGui in SMART the disc tab. After loading a few secondes a Communication failure is the final result. It depends not on the IDE disk we talked about. Last time I could see the SMART - disc list all discs where found....But know with that failure I can not say. I think the time out in the webgui is to short to handle all discs.... Maybe it is possible to set the timeout time higher? The 1,2GB disk is a seagte ST31276A if it can SM…

  • Device with N/A capacity

    peleroform - - General

    Post

    its another debian jessie system Source Code (25 lines) Dont ask which one it is... The most of the other disks are using the same sort of converter. Do you someone have an idea why connection failure is during opening SMART?

  • Device with N/A capacity

    peleroform - - General

    Post

    Thats an old IDE disk, pluged in with USB converter. In another system the disk will be found.., so a hardware failure would not be reason I think. The disk is from an other system, where the board broke. About the reason to use such a small, old, slow disk, just I have my reasons.

  • Device with N/A capacity

    peleroform - - General

    Post

    Dear all, in my physical disks, is one disk shown as capacity N/A (see picture). It is there sdj. I tried to wipe it in the GUI as also with in SSH. I only get the error in GUI: Source Code (17 lines) in SSH by using fdisk with Source Code (1 line) I get: fdisk: unable to open /dev/sdj: No such device or address The disk is a 1.2GB HDD - dont ask why I use such a small and old one. Thats the first problem. Than I thought, maybe a disk crash, by opening SMART > Devices I get: Source Code (1 line)…

  • Plugins that are wanted - Part 5

    peleroform - - Plugins

    Post

    How about a Plugin for Amazon clouddrive? Ok thats not so popular as Google Drive and Dropbox. I found a tool called Rclone, as I wrote in an other threat Link. So maybe someone is interested and able to do a plugin (I tired to install it on my second OMV system, but there it was not possible. I can not say why, because I am not so confirm with the basic systems.), that is able to do the same as in Rclone is discripte or based on Rclone.

  • Amazon Clouddrive plugin

    peleroform - - Plugins

    Post

    I found a linux tool called rclone. That toole should be able to work with different clouddrives. Amazon as also google. Maybe someone is interested or have the knowledged to do a plugin for omv based on the rclone - or the idea of it.

  • Amazon Clouddrive plugin

    peleroform - - Plugins

    Post

    Dear All, is there already a plugin, or is someone working on one, to backup photos and videos to the Amazon Clouddrive? I have seen that someone else was using s3fs to do it with the S3 Servers (link). So I am looking for nice handle able plugin to inlcude that feature in OMV webGUI to do a backup of the photos and videos to amazon (for primemembers is there a unlimited storage included). Thanks for a short answer. Regards.

  • Thanks for your answer. ntfslabel was lasttime the command with the probelm. Well during setting up the system, I change several times the labels, to get a better overview. Ok, thanks for the link, I will do it. Or if I have some other "ideas". Regards.

  • RAID build time

    peleroform - - RAID

    Post

    ok, thanks, than I must not think that I have any problems.

  • RAID build time

    peleroform - - RAID

    Post

    Dear All, just a short question, is a building time of Mirror Raid with 2 500GB WD disks (pluged in with USB 2.0.) of 30h and a speed of around 4500KB/sec normal? The system is a banana pi with: Brainfuck Source Code (132 lines)

  • that are different filesystems, ext4 as also ntfs. ext4 is possible with e2label. but ntfs would not work with e2label. I know that there is something like e2label for ntfs, but that did not really work last time, it destroied a few weeks ago the disk informations, so that that the whole disk was not useabel any more. My idea, hope, wish was to have a plugin or function direct in the webgui of omv to change it easy, not only in the commandline.

  • device for build not in list

    peleroform - - RAID

    Post

    thanks for information!

  • device for build not in list

    peleroform - - RAID

    Post

    Thanks, that helps! Now the Raid is build! Can you say what that 2 lines are doing/mean? Happy Easter!

  • device for build not in list

    peleroform - - RAID

    Post

    Dear all, I tried to build a Mirror "Raid". The devices are shown in physical disks (sdh and sdi), there I wiped them. When I now try to build the RAID, only one (sdi) of the 2 disks are shown in the list. They are both connected with USB on the system. The same is when I just try to make a new filesystem... in the drop down list is only sdi ... sdh is missing there, too. Where can be the problem? What can I do? Regards.

  • Devices not found

    peleroform - - General

    Post

    I could locate the problem.... there was a backpowering hub in the installation, so that the b pi usb connections where over powered and died with the time. an noe b pi helped to solve the problem.

  • So a shutdown command was found..... storage > physical disks > edit the lable problem still exists.