Search Results

Search results 1-9 of 9.

  • Quote from donh: “Memory: 8x4GB ECC DDR3 RAM ($60 from eBay) =48 ? ” Yeah didn't do the math and was ssh into the incorrect server. I updated the thread

  • Quote from tkaiser: “Just curious: Which kind of services does this machine run? ” Not much at the moment. I have 11x 3TB HDD installed with mergerfs and snapraid configured. FTP, NFS, SMB services are enabled. Docker is installed and im running a couple dockers currently. Plex, Nextcloud, Calibre-Web etc.

  • So i recently decided to get rid of my HP 12 bay rack-mount server (DL380P gen8 v2) as it was too loud and build a low noise but powerful server that i wouldn't need to replace for years. I had a rough budget of 450 which isn't much, so a few components came from ebay. Specs below Case: SilverStone SST-CS380 ($138 from Newegg) Power Supply: Rosewill PHOTON-550 (11 from Newegg, promotion for buying casse) Motherboard: SuperMicro X9SRH-7F v2 (150 from eBay) CPU: Intel Xeon (SR19Y) E5-2650L V2 1.7G…

  • EONNAS 850 Installation

    00_ren - - General

    Post

    Quote from subzero79: “Try and install backport kernel 3.16 In the guide section use the debootstrap tutorial on reference how to it without booting omv.” I was able to disable the device in the BIOS to get openmediavault up and running

  • Screenshot of Error

    00_ren - - General

    Post

    OMV Error_zpslpptiwgh.png

  • EONNAS 850 Installation

    00_ren - - General

    Post

    I got a EONNAS 850 cheap on ebay and decided i wanted to install Openmediavault on it. After a bit tweaking (moving sas cables for extra space to install 3.5 HDD, removing 2GB USB DOM, BIOS update etc) i was able to install Openmediavault. However whenever my system tries to boot i get the below error. [ 4. 694536] Bug: Unable to handle kernel paging request at ffff8801155f8000 [ 4. 694704] IP: [<ffffffffa0161ab9>] fintek_cir_isr+0x158/0x3c1 [fintek_cir] [ 4. 694794] PGD 1606063 PUD daffe067 PMD…

  • Openvpnas dual factor authentication

    00_ren - - Plugins

    Post

    Quote from tekkb: “Source Code (3 lines) 2nd command gives you Google Authenticator info. for given user. Useful if you need to setup account again with the android app. If shows the key. 3rd command deletes user from OpenVPN AS so you can start over if problems with Google Auth. When you setup an account in the android app for Google Authenticator your username@wanip, or user@ddnsaddress, whichever you used with your OpenVPN setup, is your account name. This is you use the "Enter the provided k…

  • Openvpnas dual factor authentication

    00_ren - - Plugins

    Post

    Ok i found the issue and i feel kinda stupid. The time was off by two minutes on my cell phone. So my server time was 9:00PM and my cell was 8:58PM

  • Openvpnas dual factor authentication

    00_ren - - Plugins

    Post

    Openmediavault Version - 1.19 Kernel - 3.2.0-4-amd64 Access Server Version 2.0.12 Hey guys, I recently installed the OPENVPNAS server plugin and it worked flawlessly; that's until i enabled Google Authenticator Support. The system generated the QR Code for me to scan (it also generated the code for me to type into google auth app) however, the google auth codes generated failed to authenticate with the server. So google auth support seems to be broken in the openvpnas plugin as it continually re…