Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

  • The OMV UnionFS plugin uses mergerfs. You should read and understand what mergerfs is and is not. See: github.com/trapexit/mergerfs

  • That drive is mounted noexec which breaks the transcoder. Fix it as follows: Make a backup copy of /etc/openmediavault/config.xml Edit /etc/openmediavault/config.xml and look in the <fstab> section for the <mntent> subsection that applies to that drive. On the <opts> line change noexec to exec and save the file. As root in the shell run the following command: omv-mkconf fstab Look at /etc/fstab again and verify that noexec was changed to exec. Run the following command as root or reboot the mach…

  • Quote from Joe86: “It's /srv/dev-disk-by-label-NAS/plexmediaserver ” The most likely explanation is that hard drive is not mounted exec capable. Is it? Post your /etc/fstab file contents if you are not sure.

  • What is the location of your Plex Library Database?

  • cloning

    gderf - - General

    Post

    You should use specific versions of Gparted or Clonezilla that are on bootable USB.

  • The disk must appear in OMV's Storage | Disks panel, must also appear in OMV's Storage | File Systems panel, and from there you can select it and attempt to mount it.

  • Plex plugin installation fails

    gderf - - Plugins

    Post

    Quote from 5k18a: “Plex was working fine for a long time, and 2 days ago I got Transcoder error on my Shield TV and WEB Player. I tried to reinstall few times and struggled with same issue like others, and finally this last 4 steps helped me. Which was quite odd even the docker version of Plex had a transcoder errors. Thanks guys! ” Regardless of whether you run Plex in a docker, via the OMV plugin, or you install it by hand, the metadatabase directory must be located on a drive that is mounted …

  • access with SSH

    gderf - - General

    Post

    Logging in via ssh as root is generally disabled by default. You can log in as an ordinary user and su to root instead. If you still wish to be able to login to ssh as root, once you have become root via su or sudo you can edit the file /etc/ssh/sshd_config and set a line like so: PermitRootLogin yes Then restart sshd

  • What are the actual filesystem permissions of the directory?

  • I think you will be fine with 8GB of RAM, but it won't hurt to go with 16GB if the extra cost isn't a problem. I run with 16GB and no swap. I have run with only 8GB for a while when one RAM module failed and had no problems.

  • Quote from Kai: “Quote from gderf: “I have been running OMV 2,3, and 4 on a Samsung 16GB 2.5in SSD for more than three years. More than enough room so long as you know what you are doing, easily filled up and taking your machine down if you don't. You can still find these drives on ebay for very little money. ” Thanks gderf. So, with what you just said, I take away that if the only thing running is the OS then I should be fine??? Does stuff like Dockers, Plex, etc., etc. also reside on the OS dr…

  • I have been running OMV 2,3, and 4 on a Samsung 16GB 2.5in SSD for more than three years. More than enough room so long as you know what you are doing, easily filled up and taking your machine down if you don't. You can still find these drives on ebay for very little money.

  • I use mergerfs but not with the OMV plugin, it's too coarse for my needs. I do the mounts myself in /etc/fstab OUTSIDE the # >>> [openmediavault] # <<< [openmediavault] section.

  • Cockpit

    gderf - - General

    Post

    Package 'qemu-kvm' has no installation candidate Do you really need the virtualization stuff?

  • Plex vpn

    gderf - - General

    Post

    I never suggested you run naked. I did suggest you separate what needs protection from what doesn't. So I'll ask you again, what portion(s) of your activities really need to be anonymized? I run Plex, Sonarr, and Deluge among others in dockers. Only Deluge runs thru a SOCKS5 proxy and I have never had a "problem" after years of full time 24/7 use. But once my ISP instituted a 1TB/month data cap I have moved on to a seedbox because torrenting on my connection uses a lot of upstream bandwidth that…

  • Plex vpn

    gderf - - General

    Post

    Quote from gimpchop: “Hi I currently have a OMV server running plex with sonar and radar set up at the moment it is all behind a vpn for obvious reasons. My problem is I need plex to have remote access but can’t forward ports through my vpn is there a way to setup omv to male the vpn ignore the vpn so I can get remote access to working plex. Thanks ” Why do you need to run any of this thru a VPN? If sonarr and radarr are using torrrents to get your content, then the torrenting process should be …

  • Quote from capitals3: “Hello, just noticed that i have the same problem as described at the beginning of this thread. Just to recap before i make a mistake: Deinstall the docker plugin -> in the plugins section of omv Reinstall with the version that ryecoaaron posted on page 3? Thanks for your help! ” I don't think you want to uninstall the plugin unless you want all of your configurations and containers wiped out. Just update it from the repo.

  • Fail2ban for OMV 4 Arrakis

    gderf - - Plugins

    Post

    Quote from tinh_x7: “When I tried to enable Fail2ban, I got an error message: Source Code (1 line)How do I fix this ? ” Did you run the suggested commands to see what might be causing this?

  • Plex Plugini uninstalable on rockpro64

    gderf - - Plugins

    Post

    What version of Plex are you running and what version is being reported as an update? If the update is a PlexPass version and you don't have a PlexPass, you can't get it. v2tec/watchtower uses tags to determine what image is pulled. See: hub.docker.com/r/v2tec/watchtower/tags/ Use the appropriate for your hardware tag when pulling the image.

  • Plex Plugini uninstalable on rockpro64

    gderf - - Plugins

    Post

    The plex dockers I use will update plex to the latest version if you restart the container.