Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

  • Quote from dkxls: “Any hint or further insight, especially regarding ZFS on these ARM boards, is much appreciated! ” With ZFS exactly the same is important as with btrfs: you need storage that correctly implements flush/write barriers which can be a real challenge when running on SBC since the majority of them and especially the most popular one (Raspberry Pi) is 'most crappy storage setup possible' by definition. SBC with a quirky USB controller combined with random external USB storage are a g…

  • physical disk properties Standby error

    tkaiser - - General

    Post

    Kurze Suche nach 'ironwolf hdparm' meint, man solle hdparm -B 254 setzen, dann klappt's auch mit dem Ding und hdparm -S sollte funktionieren wie erwartet.

  • Quote from denny2k2: “E3 1226 V3 or similar (something that has Quick Sync) ” I hope you are aware that this is an old Haswell platform missing support for all the new capabilities added to QuickSync within the last 5 years? See here for an overview: trac.ffmpeg.org/wiki/Hardware/QuickSync

  • fsck on large 6Tb disk fails

    tkaiser - - General

    Post

    Quote from sandoz: “a double or bad block is being used ” A web search for this exact phrase "a double or bad block is being used" results in one single hit and that's your own post above. How should anyone be able to help you if you do not even take care to provide exact error messages? Anyway: the filesystems seems to be severely damaged so most probably restoring from backup is the best option. And getting a clue what happened of course to prevent such things from happening again. The reasons…

  • Network Error after change to Static

    tkaiser - - Network

    Post

    Quote from Eike: “Job for networking.service failed because the control process exited with error code. See "systemctl status networking.service" and "journalctl -xe" for details. ” This message tells you to look into the output of these two commands: Source Code (2 lines) Those contain information needed to diagnose the problem which is none I would assume since: Quote from Eike: “dhcp is working fine ” So better stay with DHCP, check whether your router allows to set a static DHCP lease for yo…

  • Missing Devices RAID Management

    tkaiser - - General

    Post

    Quote from dchav007: “Do I have to create a file system for these to show up? ” No, most probably you run into the same issue as this guy: Never more than 5 data disks for each OMV machine ? (some "signature" still present on the drives preventing them from showing up in the RAID UI). Asides that what you're trying to achieve (RAID with 2 disks) seems like a really bad idea to me. If you want to create a RAID1 with mdraid please read this first.

  • Quote from kselltrum: “We mount drives as smb:// ” Ok, that's good since with cifs:// the Finder would try to establish a SMB1 connection. Anyway: I believe you should wait for OMV5 being available since the integrated Samba version then will better deal with Mac client behavior. You can read a bit about the various challenges involved here: redmine.ixsystems.com/issues/5904

  • Can't Access Webgui : Connection Refused

    tkaiser - - General

    Post

    Quote from KM0201: “apt-get update apt-get upgrade apt-get dist-upgrade ” This is not sufficient since this is missing: github.com/ThomasKaiser/OMV4_f…ter/overlay/firstrun#L160 The better idea with this 'problem' is to point users to the readme.txt at the download location where everything is explained...

  • Quote from claredad: “Any ideas? ” On the ARM based OMV images providing the output from armbianmonitor -u might help (requires you to follow the steps to enable SSH access with OMV and login via SSH)

  • Quote from KM0201: “If you have a Desktop, just open a file browser (Nautilus, Thunar, caja.. whatever) and type the path smb://your_nas_IP ” This is usually a recipe to get inferior SMB performance caused by gvfs-smb, see bugzilla.gnome.org/show_bug.cgi?id=776339

  • fsck on large 6Tb disk fails

    tkaiser - - General

    Post

    Quote from sandoz: “But why does it go to 70%? And then it halts ” "Halts" means what exactly? At the link provided above the reply contained strace and ltrace suggestions to get a clue what's going on...

  • Quote from kselltrum: “if we mount disks by smb datarates is near 130 megabytes in MAC stations ” Do you mount them using smb:// or cifs://? And which OMV version are you using? The good news: Starting with OMV5 SMB support for Mac clients will improve, see preliminary benchmark numbers with a rather slow hardware setup: github.com/openmediavault/open…01#issuecomment-468270197

  • Have you already tried -o username=desktop?

  • Quote from KM0201: “the USB 3.0 ports on them are a known weak spot ” And there are some other issues as well: Omv 4 broken odroid xu4 ?

  • fsck on large 6Tb disk fails

    tkaiser - - General

    Post

    Quote from sandoz: “Rebooted it, and i saw it was fsck that 6tb disk, but it doesn;t complete, and hangs at 70% every time ” 'Every time'? So you already killed the fsck multiple times? What about some patience since e2fsck can take several days without a problem?

  • Quote from adigcoool: “Is WD underpowered and when I copy it maxs out on power? ” Only you can answer such questions by looking into the logs and doing some tests If you repeat your test and the disk disappears again, log into your OMV host via SSH and provide output from dmesg (using an online pasteboard service like pastebin.com). Then to test whether the issue is related to disk activity you could install stress-ng, then run stress-ng --hdd 1 after changing your working dir to the disk's moun…

  • OMV users relying on Putty to administrate other hosts via SSH should upgrade immediately to at least version 0.71 released two days ago. The list of security related fixes is 'impressive' (total disaster): - Security fixes found by an EU-funded bug bounty programme: - a remotely triggerable memory overwrite in RSA key exchange, which can occur before host key verification - potential recycling of random numbers used in cryptography - on Windows, hijacking by a malicious help file in the same di…

  • Unable to login to complete setup

    tkaiser - - General

    Post

    Quote from Mr. Lumbergh: “Is there a easy way of backing up in OMV that doesn't simply image the card? ” Unfortunately not (planned for a future release).

  • /etc is group writable

    tkaiser - - General

    Post

    Are you running on an ARM based system (there majority of available OMV images is affected by a bug)?

  • Quote from sirleon: “The RAM requirenment is a strong point, i think, because of ZFS? ” Not related to ZFS at all. Just do a web search for 'e2fsck out of memory' to see that ext4/Linux is affected as well when using large filesystems.