Search Results

Search results 1-14 of 14.

  • File system preference

    zitstif - - My NAS Build

    Post

    Thanks ryecoaaron! I will have to experiment! I'm leaning toward ext4 or btrfs. Right now with NTFS, write speeds to my NAS, I'm about getting about 20MB/ps max. I guess ultimately I'm looking for better performance. In this article: htpcguides.com/raspberry-vs-ba…arks-sata-gigabit-matter/ They used ext4 and got better performance. What do you think would be better performance wise? Ext4 or BTRFS? I heard BTRFS is still 'experimental' even though Synology NAS systems use that file system.

  • File system preference

    zitstif - - My NAS Build

    Post

    banana-pi.org/m3.html - Octa-core 1.8GHz Powerful CPU. - 2 GB LPDDR3 memory. - 8 GB eMMC storage. - WiFi & Bluetooth onboard. That wouldn't be enough for zfs on a 2TB drive?

  • File system preference

    zitstif - - My NAS Build

    Post

    So my NAS situation isn't necessarily ideal but I knew it wasn't going to be and I currently am only using one 2TB hard drive hooked up to my BananaPI. My 2TB hard drive is formatted as NTFS. My question for you folks: what file system would you use in my case? Do you think ZFS would be a better option? I essentially use my NAS for hosting mp4/mkv/avi files for viewing. Any input would be greatly appreciated.

  • I'll let you know if I get around to it. I have it all up and running and don't really feel like messing with it at this point. lol I'm currently running: = openmediavault information ================================================================================ Release: 3.0.13 Codename: Erasmus Without any issues thus far.

  • I've reloaded my banana pi and i've just done this prior to doing updates: apt-mark hold openmediavault* I then did apt-get update && apt-get upgrade -y The openediavault webpage works just fine without any errors thus far. root@nas:~# cat /etc/hosts # This configuration file is auto-generated. # WARNING: Do not edit this file, your changes will be lost. 127.0.0.1 localhost 127.0.1.1 nas # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localne…

  • export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; hostname --fqdn 2>&1 Works though I had to create the directory: /usr/local/bin/ Rebooted.. and still same error message: Error #0: exception 'OMV\ExecException' with message 'Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; hostname --fqdn 2>&1' with exit code '137': Killed' in /usr/share/php/openmediavault/system/process.inc:175 Stack trace…

  • I may just reload the banana pi image and not do any updates for the time being. I also may look into maybe building my own banana pi image. If you have any other ideas. I'm all ears.

  • Error #0: exception 'OMV\ExecException' with message 'Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; hostname --fqdn 2>&1' with exit code '137': Killed' in /usr/share/php/openmediavault/system/process.inc:175 Stack trace: #0 /usr/share/php/openmediavault/system/net/dns.inc(46): OMV\System\Process->execute(Array) #1 /usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc(212): OMV\System\Net\Dns::getFqdn() #2 /usr/sh…

  • Set it back to: 127.0.1.1 root@nas:~# hostname --fqdn nas.localdomain root@nas:~# Thanks for your timely replies. I appreciate it.

  • Makes no difference. Hmph,

  • 127.0.1.1 that a typo? I'll try 127.0.0.1 instead.

  • root@nas:~# cat /etc/hosts # This configuration file is auto-generated. # WARNING: Do not edit this file, your changes will be lost. #127.0.0.1 localhost #127.0.1.1 nas 127.0.0.1 localhost.localdomain localhost 127.0.1.1 nas.localdomain nas # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts Restarted nginx and rebooted but resulted in: Error #0: exc…

  • Ran that command, refreshed web gui and still same results. I also tried rebooting to no avail: root@nas:~# cat /etc/hostname nas root@nas:~# root@nas:~# cat /etc/hosts # This configuration file is auto-generated. # WARNING: Do not edit this file, your changes will be lost. 127.0.0.1 localhost 127.0.1.1 nas # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-…

  • I got the system all up and running and after doing updates and I receive this on the web interface: Error #0: exception 'OMV\ExecException' with message 'Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; hostname --fqdn 2>&1' with exit code '137': Killed' in /usr/share/php/openmediavault/system/process.inc:175 Stack trace: #0 /usr/share/php/openmediavault/system/net/dns.inc(46): OMV\System\Process->execute(Array) #1 /usr/share/ph…