Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

  • Unable to log into web gui after update

    KM0201 - - General

    Post

    Quote from andyw: “That's strange. Please see attached. ” I just happened to see this, but just FYI... I would never trust Windows to accurately display information about a Linux filesystem... it will almost always be wrong (as it is in this case).

  • Unable to log into web gui after update

    KM0201 - - General

    Post

    Even more indicative that is the problem.... /var/lib/docker/overlay2/1bb93d795d93790555cade4c27f2b28765673b594ba15e4d5b7786044f450e4a/merged overlay 110G 108G 0 100% You cleared approx. 1gig, and now it's showing 108gigs instead of 109gig as it did originally

  • Howto check ip address?

    KM0201 - - Network

    Post

    One thing also to keep in mind... unless you've properly set up a kill switch, but if/when you lose your connection to the VPN, you're just going to drop straight back to your unprotected connection. This can be an issue if you're not aware you've been disconnected and now you're downloading things on your actual connection.

  • Howto check ip address?

    KM0201 - - Network

    Post

    By the way, I would second that if you're wanting to do this for torrenting, it would probably be way easier to do this w/ Docker (that's how I've got my torrent server set up with PIA).. youtube.com/watch?v=MRgZ9oZQ7ds&t=

  • Howto check ip address?

    KM0201 - - Network

    Post

    I've never done this over locally on the console, but I'm assuming it would be the same. Why are you not using SSH? It would probably be considerably easier.... not to mention not needing a display, keyboard, etc. hooked up to your NAS. Not to mention it would be considerably easier to get help as rather than posting screen shots you could cut and paste from the terminal window. From where you are now in the last Pic.... Cntrl C should kill your VPN connection you're trying right now. When you'r…

  • Unable to log into web gui after update

    KM0201 - - General

    Post

    That's not what the output you posted says... You see this line over and over... /var/lib/docker/overlay2/e805aba40a5e232738435f858fb202611413895ff4a569859c808f6c2cc644f7/merged overlay 110G 109G 0 100%

  • Howto check ip address?

    KM0201 - - Network

    Post

    Quote from julle: “Hey, I'm trying to setup NordVpn for my server, I followed their tutorial. Connected via the terminal, directly on the computer. However now I can't check the IP on the machine. When I try to enter any command it just shows up as text, nothing happens if I press enter just a new row. This is the tutorial: nordvpn.com/sv/tutorials/linux/openvpn/ I tried to use the OpenVPN plugin but i could not get it working. ” host myip.opendns.com resolver1.opendns.com or if you have curl in…

  • Starting over

    KM0201 - - General

    Post

    Quote from ikkeenjij36: “Hi all,i have made a new server with 8x4 tb disk and a ssd to put the system on,i want to make it at first a media server and maybe later on more to do with it. Is it possible to make on system disk and the other 32 tb for a data disk/volume/? And how do i run things like sabnzbd radarr plex couchpotato headphones etc on it? Sorry if i put this in the wrong section ” Regarding the OS disk... It's Possible, but it's a bit more detailed than a normal install.. If you're co…

  • Unable to log into web gui after update

    KM0201 - - General

    Post

    Missing space on boot drive...

  • Unable to log into web gui after update

    KM0201 - - General

    Post

    You have your docker containers on your boot drive. at 110gigs, I'm guessing your plex or emby database is there.

  • IPV4 Address

    KM0201 - - Network

    Post

    If you gave some form of internet access... apt-get install net-tools will install the tools for ifconfig to work.

  • Windows can access a share, Ubunto can't

    KM0201 - - CIFS/SMB

    Post

    Quote from andre_x: “Quote from tkaiser: “Have you already tried -o username=desktop? ” Yes, no luck Quote from KM0201: “Are you using a Desktop on 16.04, or is this a server? If you have a Desktop, just open a file browser (Nautilus, Thunar, caja.. whatever) and type the path smb://your_nas_IP You should see your smb shares there, and simply need to enter your nas username/password when prompted. Assuming you have a desktop, I've never had to do all that to use an SMB share. ” I've tried with N…

  • Ignore existing files..

    KM0201 - - RSync

    Post

    Quote from macom: “Quote from flyinjoe13: “So if I understand you correctly, I don't have to worry about adding that extra option. ” AFAIK it is important to enable the archive option. Part of it is to preserve modification times. If not set you might end up rsyncing all files all the time. ” I'm not in front of my NAS at the moment, but I've used rsync a lot, and if that's required, then it is enabled by default.. because I've honestly never changed a single setting on my rsync jobs from the de…

  • Quote from Peter.Weyland: “Quote from KM0201: “Since you seem a bit more contrite now, if you're truly having an issue because the kernel image on OMV the OMV ISO, you can download the current mini ISO for Debian Stretch, do a minimal install, and then install OMV on top of it. The official Debian ISO's are updated frequently. For instance, the current Netinst image, which you'd want to use.. was published on 2/16/19, the current OMV ISO was pushed out in March of '18. Install OMV4 on Debian 9 (…

  • Since you seem a bit more contrite now, if you're truly having an issue because the kernel image on OMV the OMV ISO, you can download the current mini ISO for Debian Stretch, do a minimal install, and then install OMV on top of it. The official Debian ISO's are updated frequently. For instance, the current Netinst image, which you'd want to use.. was published on 2/16/19, the current OMV ISO was pushed out in March of '18. Install OMV4 on Debian 9 (Stretch)

  • Ignore existing files..

    KM0201 - - RSync

    Post

    Quote from flyinjoe13: “I am using the Rsync option from the left side menu tree. I don't know if that's a plugin or not. It was always there from the time I installed OMV I think. So if I understand you correctly, I don't have to worry about adding that extra option. Just wanted to make sure of that. Thanks for the info.I am using the Rsync option from the left side menu tree. I don't know if that's a plugin or not. It was always there from the time I installed OMV I think. ” Correct.

  • Ignore existing files..

    KM0201 - - RSync

    Post

    Quote from flyinjoe13: “I am rsync'ing my Movie directory to a backup OMV server. Everything is going fine but taking forever because of the large amount of data being sync'd. For the next time, I only want to sync what is new not the entire directory again. To do this do I add the '--ignore-existing' option in the Extra Options box? I am pretty sure that's what I have to do but want to make sure so that I don't screw something up on either the server or the backup server by using a wrong comman…

  • Quote from ryecoaaron: “Quote from Peter.Weyland: “I'm guessing the dogged insistence on basing off Debian means OMV hardware support lags far behind the other mainstream distro's? ” The ISO uses the 4.9 kernel which I guess a bit behind others BUT as soon as you update after installation, you should get the 4.19 backports kernel which is ahead of most of the others.Quote from Peter.Weyland: “I tried inserting "--nomodeset" into the kernel parameters without success. ” Did you try fb=false or ra…

  • Samba refuses to start on OMV4

    KM0201 - - CIFS/SMB

    Post

    Quote from cschalk: “Ok, this appears to be a bug and should be logged and fixed against OMV4. I've installed OMV3 and was able to configure LDAP and SMB access just fine. ” Unless there is a problem in the way the LDAP or SMB plug-ins are interacting with each other, it doesn't appear to be an OMV issue. If it's LDAP and SMB related.. it's not an OMV bug. It's either a bug w/ one (or both) of those packages, or it's a Debian 9 bug. Neither of which Volker is going to fix. If you disable the LDA…

  • A lot of questions about OMV

    KM0201 - - General

    Post

    Quote from flyinjoe13: “Go to Youtube and look up and follow all of Techno Dad's OMV videos. They are an invaluable resource. Be patient and follow each video step by step. He has ones that cover all sorts of things from initial install and setup to installing dockers and other plugins. I think even has one for installing in a VM. Like you, I am new to all of this stuff and with his videos and the help of the people here for things not covered in the videos, i've got a nice home server going now…