i updated the guide and added some best practices:
-picons (automatic channel logos)
-a link to a predefiend channel list from kodinerds
-compiled newest version from Git (master branch)
Tvheadend Guide discussion thread
-
- OMV 2.x
- gelöst
- firsttris
-
-
I'm still getting the 'Access Denied' message by the way.
-
should work now...
somehow the forum bot accused me of spam and perm-banned me each time i was editing the guide.
maybe the reason are to many links/urls in the guide, no clue. -
Yes, I got it to work with hdhomerun tuners by using the latest compiled version in this thread. Did you use this version as well? The tuners were recognized via the gui.
My problem is that some hd channels don't record properly. Starts out good but starts stuttering after 30 min when playing back with kodi. Doesn't matter if I stop and restart to rebuffer so I think it something wrong with the recording itself. Any tips how to troubleshoot?
I'm not sure... it's been a while now. I may have to give it another shot as I'm really not crazy about using up resources just to run TVHeadend.
Are you streaming your playback, or are you trying to do it locally? Perhaps you should try copying the recorded .ts file locally and trying it again on your Kodi system and maybe on another computer using a different player. At least that way you could make sure it was streaming properly.
What hardware are you running on both ends?
-
So I just tried it again using the latest compiled version.
Still no love. It doesn't recognize my hdhomerun tuners.
Is there something I'm missing?
-
Excellent work, thank you very much!
Works fine on OMV 2.1 (3.16) with my TeVii S660 DVB-S2 USB. But I have problems to bring my DVBSKY S952 v3 to life I did exactly as decribed in this install guide:
http://www.linuxtv.org/wiki/index.php/DVBSkydmesg | grep -i dvb
[ 2.892753] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[ 2.895430] usb 1-1.5: firmware: direct-loading firmware dvb-usb-s660.fw
[ 3.018265] dvb-usb: found a 'TeVii S660 USB' in warm state.
[ 3.018295] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 3.022318] DVB: registering new adapter (TeVii S660 USB)
[ 3.039414] dvb-usb: MAC address: 01:01:01:01:01:01
[ 3.041610] dvb-usb: no frontend was attached by 'TeVii S660 USB'
[ 3.066338] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/rc/rc0/input15
[ 3.066445] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/rc/rc0
[ 3.066447] dvb-usb: schedule remote query interval to 150 msecs.
[ 3.066448] dvb-usb: TeVii S660 USB successfully initialized and connected.
[ 3.134578] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected.
[ 4.775229] usb 1-1.5: Product: DVBS2BOX
[ 4.775526] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[ 4.782008] usb 1-1.5: firmware: direct-loading firmware dvb-usb-s660.fw
[ 4.902211] dvb-usb: found a 'TeVii S660 USB' in warm state.
[ 4.902257] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 4.902484] DVB: registering new adapter (TeVii S660 USB)
[ 5.033210] dvb-usb: MAC address: 00:18:bd:5b:c7:58
[ 5.055628] usb 1-1.5: DVB: registering adapter 0 frontend 0 (Montage Technology DS3000)...
[ 5.056070] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/rc/rc0/input16
[ 5.056099] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/rc/rc0
[ 5.056101] dvb-usb: schedule remote query interval to 150 msecs.
[ 5.056102] dvb-usb: TeVii S660 USB successfully initialized and connected.
[ 5.486731] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[ 5.487072] usb 1-1.5: firmware: direct-loading firmware dvb-fe-ds3000.fwBut the card is not shown in TVH.
Any ideas or anybody who runs the S952 successfully?
Cheers,
Chris
-
u are lucky i have the same dvbsky card
https://dl.dropboxusercontent.com/u/13344648/dvbsky.PNGfollow this guide:
http://www.dvbsky.net/download…driver_installation_Guide
download this driver (match your kernel version):
http://www.dvbsky.net/Support_linux.html
(not upstream driver)@BAlGaInTl my builds have no hdhomerun support, you can easily build your own deb
regards
-
Hi,
does anybody have the problem that tvheadend hangs with 100 % cpu load one time a day (most of the time after a recording). nothing to see in the log (not even with debug enabled)
-
I downloaded the Media Built Driver media_build-bst-14-141106
When I try to compile I get this error:
Code
Alles anzeigenroot@nas:~/media_build-bst-14# ./v4l/build_x64.sh if build for 64 bit system os to support multi-standard, include DVB-T,DVB-T2 and DVB-C root@nas:~/media_build-bst-14# make make -C /root/media_build-bst-14/v4l make[1]: Entering directory `/root/media_build-bst-14/v4l' No version yet, using 3.16.0-0.bpo.4-amd64 make[1]: Leaving directory `/root/media_build-bst-14/v4l' make[1]: Entering directory `/root/media_build-bst-14/v4l' scripts/make_makefile.pl Updating/Creating .config Preparing to compile for kernel version 3.16.0 File not found: /lib/modules/3.16.0-0.bpo.4-amd64/build/.config at ./scripts/make_kconfig.pl line 33, <IN> line 4. make[1]: Leaving directory `/root/media_build-bst-14/v4l' make[1]: Entering directory `/root/media_build-bst-14/v4l' Updating/Creating .config Preparing to compile for kernel version 3.16.0 File not found: /lib/modules/3.16.0-0.bpo.4-amd64/build/.config at ./scripts/make_kconfig.pl line 33, <IN> line 4. make[1]: *** Keine Regel vorhanden, um das Target ».myconfig«, benötigt von »config-compat.h«, zu erstellen. Schluss. make[1]: Leaving directory `/root/media_build-bst-14/v4l' make: *** [all] Fehler 2
BTW: The card works fine with OMW 3 beta(4.3.0 BPO).
-
@chriz77 somehow i can compile exacly this package on 3.16 bpo 4 amd64 but i think i have the correct prerequisites installed. (build_essential etc..)
here are newer tvheadend builds:
https://bintray.com/tvheadend/deb/tvheadend -
I guess that will take a bit more research on my part. So far, I've not had any luck.
-
Neither of these methods worked for me when trying to install TVHeadend. If I do
Zitatdpkg -i tvheadend_4.1-xxxx.deb
I get an error saying no such file or directory.
If I try to compile using the second set of instructions, I get stuck at the first step. The directory in line one
Zitatcd /home/hts
doesn't exist. If I'm supposed to have that, I do not in the latest OMV build.
Thoughts? Or can someone point me to a guide that has more detailed instructions? I feel like I should have done something before running dpkg, but the guide doesn't say to.
Thanks.
-
Hello Learning2NAS
dpkg -i tvheadend_4.1-xxxx.deb is pseudo code where xxxx stands for the version and architecture
so if we grab the current version from tvheadend repository it would be:
cd /home
wget https://bintray.com/artifact/d…g7a919b1~wheezy_amd64.deb
dpkg -i tvheadend_4.1-1355~g7a919b1~wheezy_amd64.debregards
firsttris -
Yes, of course the 4.1-xxxx.deb is not meant to be used literally.
I tried both 4.1-1355 and 4.1-g7a919b1, but I never tried to string them all together because I never saw the complete bintray link like you posted. Haha! What a waste of time that was.
Thanks so much for posting an example. I'm sure it will work when I next try to run the command
-
Works really perfekt.
But how can i upgrade to the latest Version of tvheadend? -
/Edit: I fixed it by mysef
-
I'm having problems using your guide.
I've downloaded the latest version with
wget https://bintray.com/artifact/d…g0b69407~wheezy_amd64.debThen I tried to run dpkg -i tvheadend-dbg_.....deb but I get this error.
Code
Alles anzeigenroot@OMV:/# dpkg -i tvheadend-dbg_4.1-1853~g0b69407~wheezy_amd64.deb (Reading database ... 54327 files and directories currently installed.) Preparing to replace tvheadend-dbg 4.1-1853~g0b69407~wheezy (using tvheadend-dbg_4.1-1853~g0b69407~wheezy_amd64.deb) ... Unpacking replacement tvheadend-dbg ... dpkg: dependency problems prevent configuration of tvheadend-dbg: tvheadend-dbg depends on tvheadend (= 4.1-1853~g0b69407~wheezy); however: Package tvheadend is not installed. dpkg: error processing tvheadend-dbg (--install): dependency problems - leaving unconfigured Errors were encountered while processing: tvheadend-dbg root@OMV:/#
EDIT: I fixed my problem by removing tv headend and then reinstalling it and then installing liburiparser1 (as it seemd to be needed).
-
How would i go about updating tvheadend?
Would I have to repeat the entire process? -
Which version works with current stable OMV 2.1?
-
I have managed to get TVH up and running on OMV and everything is working well, except the OTA grabbing - not all that great in the UK.
I have a Schedules Direct account and wanted to use the latest version of XMLTV-Util (05.69, which offers SDJsn grabbing) but I realised that Jessie does not support this - the latest version is 05.63-2.
My other option, now, is to use mc2xml instead but I am having trouble understanding how to install and set it up.
Any help would be much appreciated.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!