Hello,
I installed OMV 2.1 on my ASRock Q1900DC-ITX. I created a Raid1 on my 2 x 3TB WD Red (sda+sdb). Everything was working fine.
When I reboot the system, the Raid isn't visible any more, but the physical devices are still there.
The File-System for the Raid (Ext4) says:
Label n/a
status missing
I boot the system from an USB-Stick (/dev/sdc).
When I Create A new(?) Raid1 in the Rais management (~7h), the Data on the Raid-System is back.
When I reboot then, the Raid-Configuration is gone.
I hope for some Ideas
thx ede
the boot-log
Code
Mon Aug 17 20:04:03 2015: Setting parameters of disc: /dev/sda failed!
Mon Aug 17 20:04:03 2015: /dev/sdb failed!
Mon Aug 17 20:04:03 2015: /dev/sda failed!
Mon Aug 17 20:04:03 2015: /dev/sdb failed!
Mon Aug 17 20:04:03 2015: Setting preliminary keymap...done.
Mon Aug 17 20:04:03 2015: Activating swap...done.
Mon Aug 17 20:04:03 2015: Checking root file system...fsck from util-linux 2.20.1
Mon Aug 17 20:04:03 2015: /dev/sdc2: clean, 44648/1676080 files, 664714/6704128 blocks
Mon Aug 17 20:04:03 2015: done.
Mon Aug 17 20:04:03 2015: Loading kernel module loop.
Mon Aug 17 20:04:03 2015: Generating udev events for MD arrays...done.
Mon Aug 17 20:04:03 2015: Cleaning up temporary files... /tmp.
Mon Aug 17 20:04:03 2015: Setting up LVM Volume Groups... No volume groups found
Mon Aug 17 20:04:03 2015: No volume groups found
Mon Aug 17 20:04:03 2015: done.
Mon Aug 17 20:04:04 2015: Activating lvm and md swap...done.
Mon Aug 17 20:04:04 2015: Checking file systems...fsck from util-linux 2.20.1
Mon Aug 17 20:04:04 2015: done.
Mon Aug 17 20:04:04 2015: Mounting local filesystems...done.
Mon Aug 17 20:04:04 2015: Activating swapfile swap...done.
Mon Aug 17 20:04:04 2015: Cleaning up temporary files....
Mon Aug 17 20:04:04 2015: Cleaning up...done.
Mon Aug 17 20:04:04 2015: Setting kernel variables ...done.
Mon Aug 17 20:04:04 2015: Setting up resolvconf...done.
Mon Aug 17 20:04:06 2015: Configuring network interfaces...RTNETLINK answers: File exists
Mon Aug 17 20:04:06 2015: Failed to bring up lo.
Mon Aug 17 20:04:06 2015: done.
Mon Aug 17 20:04:06 2015: Starting rpcbind daemon....
Mon Aug 17 20:04:06 2015: Starting NFS common utilities: statd idmapd.
Mon Aug 17 20:04:06 2015: Cleaning up temporary files....
Mon Aug 17 20:04:06 2015: Setting console screen modes.
Mon Aug 17 20:04:06 2015: ^[[9;30]^[[14;30]Skipping font and keymap setup (handled by consol$
Mon Aug 17 20:04:06 2015: Setting up console font and keymap...done.
Mon Aug 17 20:04:07 2015: INIT: Entering runlevel: 2
Mon Aug 17 20:04:07 2015: Using makefile-style concurrent boot in runlevel 2.
Mon Aug 17 20:04:07 2015: Starting rpcbind daemon...Already running..
Mon Aug 17 20:04:07 2015: Starting NFS common utilities: statd idmapd.
Mon Aug 17 20:04:07 2015: Starting watchdog keepalive daemon: wd_keepalive.
Mon Aug 17 20:04:07 2015: Starting enhanced syslogd: rsyslogd.
Mon Aug 17 20:04:07 2015: Starting anac(h)ronistic cron: anacron.
Mon Aug 17 20:04:07 2015: Starting ACPI services....
Mon Aug 17 20:04:08 2015: Starting system message bus: dbus.
Mon Aug 17 20:04:08 2015: Starting RRDtool data caching daemon: rrdcached.
Mon Aug 17 20:04:08 2015: Starting MD monitoring service: mdadm --monitor.
Mon Aug 17 20:04:08 2015: Starting NTP server: ntpd.
Mon Aug 17 20:04:08 2015: Loading cpufreq kernel modules...done (acpi-cpufreq).
Mon Aug 17 20:04:09 2015: Starting quota service: rpc.rquotad.
Mon Aug 17 20:04:09 2015: Starting DNS forwarder and DHCP server: dnsmasq.
Alles anzeigen