Docker GUI plugin now stable

    • OMV 2.x

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Version 3.1.9 of the plugin is now released. Changelog below:

      * Add restart policy menu. Includes always, on-failure, unless-stopped.
      * Add basic macvlan support in the gui to select the network and add the ip address.
      * Retain the extra arguments on modify container action.
      * Add clear log button.
      * Add tab for networks management
      * Add services indicator
      * Various UI fixes
      * Use dockerd for daemon startup
    • nicjo814 wrote:

      Version 3.1.9 of the plugin is now released. Changelog below:

      * Add restart policy menu. Includes always, on-failure, unless-stopped.
      * Add basic macvlan support in the gui to select the network and add the ip address.
      * Retain the extra arguments on modify container action.
      * Add clear log button.
      * Add tab for networks management
      * Add services indicator
      * Various UI fixes
      * Use dockerd for daemon startup

      If some of the edit, check, add icons still look stretched is a browser cache issue. The port forward missed some align also in the add row. I'll push that in the next release
      chat support at #openmediavault@freenode IRC | Spanish & English | GMT+10
      telegram.me/openmediavault broadcast channel
      openmediavault discord server
    • nicjo814 wrote:

      A little bit embarrassing... I had DNS issues on the dev machine
      :)

      With OMV 4.x, there is just one docker repo and it is the docker-ce repo. Is that good for you?
      omv 4.0.16 arrakis | 64 bit | 4.14 backports kernel | omvextrasorg 4.1.2
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please don't PM for support... Too many PMs!
    • @ryecoaaron I've pushed a new version of the plugin to GitHub that uses the docker-ce package instead of docker-engine. Could you test (build) this locally on your end with the yet unreleased omvextras plugin where the "Docker CE" repo is present? The idea is to build version 3.1.10 of the docker plugin and then push it to the erasmus-docker-ce repo on Bintray.

      The following test cases exist:
      * Docker plugin installed < 3.1.9 should result in not being able to enable the Docker CE repo in omvextras.
      * No docker plugin installed, or version 3.1.9 installed should make it possible to enable the Docker CE repo.

      When the Docker CE repo is enabled it should be possible to "upgrade" the plugin via the standard OMV gui (Update Management).

      I understand that it's quite a bit of work to test this, but it would be extremely welcome :) I've tested it before myself, but it would be nice with a second pair of eyes to check for potential issues...
    • I have install straigt ahead an basic TV-Headend on Docker, in bridged mode. But i can´t get the TVH panel?!?

      Brainfuck Source Code

      1. [s6-init] making user provided files available at /var/run/s6/etc...exited 0.
      2. [s6-init] ensuring user provided files have correct perms...exited 0.
      3. [fix-attrs.d] applying ownership & permissions fixes...
      4. [fix-attrs.d] done.
      5. [cont-init.d] executing container initialization scripts...
      6. [cont-init.d] 10-adduser: executing...
      7. usermod: no changes
      8. -------------------------------------
      9. _ _ _
      10. | |___| (_) ___
      11. | / __| | |/ _ \
      12. | \__ \ | | (_) |
      13. |_|___/ |_|\___/
      14. |_|
      15. Brought to you by linuxserver.io
      16. We gratefully accept donations at:
      17. https://www.linuxserver.io/donations/
      18. -------------------------------------
      19. GID/UID
      20. -------------------------------------
      21. User uid: 911
      22. User gid: 911
      23. -------------------------------------
      24. [cont-init.d] 10-adduser: exited 0.
      25. [cont-init.d] 30-config: executing...
      26. [cont-init.d] 30-config: exited 0.
      27. [cont-init.d] done.
      28. [services.d] starting services
      29. [services.d] done.
      30. 2017-09-03 20:01:50.684 [ INFO] main: Log started
      31. 2017-09-03 20:01:50.684 [ INFO] http: Starting HTTP server 0.0.0.0:9981
      32. 2017-09-03 20:01:50.684 [ INFO] htsp: Starting HTSP server 0.0.0.0:9982
      33. 2017-09-03 20:01:50.709 [ INFO] config: loaded
      34. 2017-09-03 20:01:50.709 [ INFO] config: scanfile (re)initialization with path <none>
      35. 2017-09-03 20:01:50.709 [ INFO] transcode: 'video' context type registered
      36. 2017-09-03 20:01:50.709 [ INFO] transcode: 'audio' context type registered
      37. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHH264Decoder' decoder helper registered
      38. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHTHEORADecoder' decoder helper registered
      39. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHAACDecoder' decoder helper registered
      40. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHVORBISDecoder' decoder helper registered
      41. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHOPUSDecoder' decoder helper registered
      42. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHMPEG2VIDEOEncoder' encoder helper registered
      43. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHH264Encoder' encoder helper registered
      44. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHHEVCEncoder' encoder helper registered
      45. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHAACEncoder' encoder helper registered
      46. 2017-09-03 20:01:50.709 [ INFO] codec: 'mpeg2video' encoder registered
      47. 2017-09-03 20:01:50.709 [ INFO] codec: 'mp2' encoder registered
      48. 2017-09-03 20:01:50.709 [ INFO] codec: 'aac' encoder registered
      49. 2017-09-03 20:01:50.709 [ INFO] codec: 'vorbis' encoder registered
      50. 2017-09-03 20:01:50.709 [ INFO] codec: 'libx264' encoder registered
      51. 2017-09-03 20:01:50.709 [ INFO] codec: 'libx265' encoder registered
      52. 2017-09-03 20:01:50.709 [ INFO] codec: 'libvpx' encoder registered
      53. 2017-09-03 20:01:50.709 [ INFO] codec: 'libvpx-vp9' encoder registered
      54. 2017-09-03 20:01:50.709 [ INFO] codec: 'libtheora' encoder registered
      55. 2017-09-03 20:01:50.709 [ INFO] codec: 'libvorbis' encoder registered
      56. 2017-09-03 20:01:50.709 [ INFO] codec: 'libopus' encoder registered
      57. 2017-09-03 20:01:50.709 [ INFO] codec: 'webtv-vp8' codec profile created
      58. 2017-09-03 20:01:50.709 [ INFO] codec: 'webtv-h264' codec profile created
      59. 2017-09-03 20:01:50.709 [ INFO] codec: 'webtv-vorbis' codec profile created
      60. 2017-09-03 20:01:50.709 [ INFO] codec: 'webtv-aac' codec profile created
      61. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'Canal Digitaal SD'
      62. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'Canal Digitaal HD'
      63. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'TV Vlaanderen SD'
      64. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'TV Vlaanderen HD'
      65. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'TéléSAT SD'
      66. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'TéléSAT HD'
      67. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'AustriaSat Astra1'
      68. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'Canal Digitaal HD'
      69. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'TV Vlaanderen HD'
      70. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'TéléSAT HD'
      71. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'AustriaSat Astra3'
      72. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'Skylink: Czech Republic'
      73. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'Skylink: Slovak Republic'
      74. 2017-09-03 20:01:50.811 [ INFO] scanfile: DVB-S - loaded 1 regions with 112 networks
      75. 2017-09-03 20:01:50.811 [ INFO] scanfile: DVB-T - loaded 44 regions with 1112 networks
      76. 2017-09-03 20:01:50.811 [ INFO] scanfile: DVB-C - loaded 17 regions with 57 networks
      77. 2017-09-03 20:01:50.811 [ INFO] scanfile: ATSC-T - loaded 2 regions with 11 networks
      78. 2017-09-03 20:01:50.811 [ INFO] scanfile: ATSC-C - loaded 1 regions with 5 networks
      79. 2017-09-03 20:01:50.811 [ INFO] scanfile: ISDB-T - loaded 2 regions with 1297 networks
      80. 2017-09-03 20:01:54.715 [ INFO] dvr: Creating new configuration ''
      81. 2017-09-03 20:01:54.715 [WARNING] access: Created default wide open access controle entry
      82. 2017-09-03 20:01:54.716 [ INFO] csa: Using SSE2 128bit parallel descrambling
      83. 2017-09-03 20:01:54.716 [ INFO] descrambler: adding CAID 2600/FFFF as ConstCW interval 10000ms pc 20 (BISS)
      84. 2017-09-03 20:01:54.716 [ INFO] descrambler: adding CAID 0E00/FFFF as MultiPID interval 1000ms pc 2 (PowerVu)
      85. 2017-09-03 20:01:54.716 [ INFO] epggrab: module eit created
      86. 2017-09-03 20:01:54.716 [ INFO] epggrab: module uk_freesat created
      87. 2017-09-03 20:01:54.716 [ INFO] epggrab: module uk_freeview created
      88. 2017-09-03 20:01:54.716 [ INFO] epggrab: module nz_freeview created
      89. 2017-09-03 20:01:54.716 [ INFO] epggrab: module viasat_baltic created
      90. 2017-09-03 20:01:54.716 [ INFO] epggrab: module Bulsatcom_39E created
      91. 2017-09-03 20:01:54.716 [ INFO] epggrab: module psip created
      92. 2017-09-03 20:01:54.722 [ INFO] epggrab: module opentv-skynz created
      93. 2017-09-03 20:01:54.722 [ INFO] epggrab: module opentv-skyuk created
      94. 2017-09-03 20:01:54.722 [ INFO] epggrab: module opentv-skyit created
      95. 2017-09-03 20:01:54.723 [ INFO] epggrab: module opentv-ausat created
      96. 2017-09-03 20:01:54.724 [ INFO] epggrab: module pyepg created
      97. 2017-09-03 20:01:54.724 [ INFO] epggrab: module xmltv created
      98. 2017-09-03 20:01:54.725 [ INFO] spawn: Executing "/usr/bin/tv_find_grabbers"
      99. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_file created
      100. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_wg created
      101. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_uk_bleb created
      102. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_dk_dr created
      103. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_il created
      104. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_is created
      105. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_tr created
      106. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_eu_egon created
      107. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_fr_kazer created
      108. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_se_tvzon created
      109. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_eu_dotmedia created
      110. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_na_dtv created
      111. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_se_swedb created
      112. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_eu_epgdata created
      113. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_huro created
      114. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_fi created
      115. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_ar created
      116. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_es_laguiatv created
      117. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_fr created
      118. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_nl created
      119. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_na_tvmedia created
      120. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_zz_sdjson created
      121. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_combiner created
      122. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_uk_tvguide created
      123. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_it created
      124. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_na_dd created
      125. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_zz_sdjson_sqlite created
      126. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_fi_sv created
      127. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_dtv_la created
      128. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_sd_json created
      129. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_ch_search created
      130. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_pt_meo created
      131. 2017-09-03 20:01:55.774 [ NOTICE] START: HTS Tvheadend version 4.3-414~g994de3d9f started, running as PID:200 UID:911 GID:911, CWD:/var/run/s6/services/tvheadend CNF:/config
      Display All
      Also take a look to the booth screenshots, the web panel should be to find on 192.168.178.54:9982 or *9981? But there i get jut an basic error?!?
      Were is my mistake?
      Images
      • TVH1.PNG

        25.79 kB, 642×608, viewed 60 times
      • TVH2.PNG

        33.51 kB, 639×610, viewed 58 times
    • can someone tell me how to update the image that the containers are using??? i feel like im taking crazy pills. i dont see anywhere in the GUI. so i run docker pull <some-image> and then i just end up with two images. then it just becomes a pain to redo all of the volumes. would be nice to export and import that stuff if updating the image doesnt work.

      The post was edited 1 time, last by thejacer87 ().

    • indigo wrote:

      Also take a look to the booth screenshots, the web panel should be to find on 192.168.178.54:9982 or *9981? But there i get jut an basic error?!?
      Were is my mistake?
      In the first image it looks like you haven't forwarded any ports. Without this you won't be able to access the container when it runs in bridged mode. Have a look at the guide located here: OpenMediaVault Docker-GUI Plugin Usage [ x86_64 Arch only] on how to forward ports.
    • thejacer87 wrote:

      can someone tell me how to update the image that the containers are using??? i feel like im taking crazy pills. i dont see anywhere in the GUI. so i run docker pull <some-image> and then i just end up with two images. then it just becomes a pain to redo all of the volumes. would be nice to export and import that stuff if updating the image doesnt work.
      There is no "built in" way to do this with docker. One common approach is to stop/remove the running container, pull the new image, start up a new container based on the new image. Of course this requires that you have your data stored outside of the container and that you remember how the container was started...
    • nicjo814 wrote:

      thejacer87 wrote:

      can someone tell me how to update the image that the containers are using??? i feel like im taking crazy pills. i dont see anywhere in the GUI. so i run docker pull <some-image> and then i just end up with two images. then it just becomes a pain to redo all of the volumes. would be nice to export and import that stuff if updating the image doesnt work.
      There is no "built in" way to do this with docker. One common approach is to stop/remove the running container, pull the new image, start up a new container based on the new image. Of course this requires that you have your data stored outside of the container and that you remember how the container was started...
      well that sucks. i wish there was a way to export the settings then. annoying to set the paths again and again
    • There is an application that can be used to keep images up to date restore containers with same settings, don't know the name but I am sure it has been mentioned here. It even runs on a container so it needs access to the domain socket.
      How many times a week are you upgrading your images? I rarely touch them once running, if the app is a fast moving one in terms of commits then the container creator should have a self upgrade method inside like plex.
      chat support at #openmediavault@freenode IRC | Spanish & English | GMT+10
      telegram.me/openmediavault broadcast channel
      openmediavault discord server
    • subzero79 wrote:

      There is an application that can be used to keep images up to date restore containers with same settings, don't know the name but I am sure it has been mentioned here. It even runs on a container so it needs access to the domain socket.
      How many times a week are you upgrading your images? I rarely touch them once running, if the app is a fast moving one in terms of commits then the container creator should have a self upgrade method inside like plex.
      sonarr, radarr etc. i will look into upgrade methods thanks
    • The method called out here is the Watchtower container. I use it and it’s fantastic. Specifically same case you mention, weekly updates to LS.io containers is seamless.

      Keep in mind as well, if you stop a running container, then update (aka pull the new) the image, then restart the machine - to my knowledge that will work as well to get the updates. I did this previously where I’d pull the updates, then delete the older image (shows with funky name) and go on. Alternatively if needed you can just hit the modify button, then save, and it will re-create the container fresh with your settings as well and def use the latest image.

      And to do the pull, you can do this in the GUI. Right on the first screen there is a button for Pull Image. But I believe you just have to enter the repository name properly. Then it will check for updates.

      My opinion is biased since it’s how I do it, but Watchtower is the way to go.
    • indigo wrote:

      Display Spoiler
      I have install straigt ahead an basic TV-Headend on Docker, in bridged mode. But i can´t get the TVH panel?!?

      Brainfuck Source Code

      1. [s6-init] making user provided files available at /var/run/s6/etc...exited 0.
      2. [s6-init] ensuring user provided files have correct perms...exited 0.
      3. [fix-attrs.d] applying ownership & permissions fixes...
      4. [fix-attrs.d] done.
      5. [cont-init.d] executing container initialization scripts...
      6. [cont-init.d] 10-adduser: executing...
      7. usermod: no changes
      8. -------------------------------------
      9. _ _ _
      10. | |___| (_) ___
      11. | / __| | |/ _ \
      12. | \__ \ | | (_) |
      13. |_|___/ |_|\___/
      14. |_|
      15. Brought to you by linuxserver.io
      16. We gratefully accept donations at:
      17. https://www.linuxserver.io/donations/
      18. -------------------------------------
      19. GID/UID
      20. -------------------------------------
      21. User uid: 911
      22. User gid: 911
      23. -------------------------------------
      24. [cont-init.d] 10-adduser: exited 0.
      25. [cont-init.d] 30-config: executing...
      26. [cont-init.d] 30-config: exited 0.
      27. [cont-init.d] done.
      28. [services.d] starting services
      29. [services.d] done.
      30. 2017-09-03 20:01:50.684 [ INFO] main: Log started
      31. 2017-09-03 20:01:50.684 [ INFO] http: Starting HTTP server 0.0.0.0:9981
      32. 2017-09-03 20:01:50.684 [ INFO] htsp: Starting HTSP server 0.0.0.0:9982
      33. 2017-09-03 20:01:50.709 [ INFO] config: loaded
      34. 2017-09-03 20:01:50.709 [ INFO] config: scanfile (re)initialization with path <none>
      35. 2017-09-03 20:01:50.709 [ INFO] transcode: 'video' context type registered
      36. 2017-09-03 20:01:50.709 [ INFO] transcode: 'audio' context type registered
      37. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHH264Decoder' decoder helper registered
      38. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHTHEORADecoder' decoder helper registered
      39. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHAACDecoder' decoder helper registered
      40. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHVORBISDecoder' decoder helper registered
      41. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHOPUSDecoder' decoder helper registered
      42. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHMPEG2VIDEOEncoder' encoder helper registered
      43. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHH264Encoder' encoder helper registered
      44. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHHEVCEncoder' encoder helper registered
      45. 2017-09-03 20:01:50.709 [ INFO] transcode: '&TVHAACEncoder' encoder helper registered
      46. 2017-09-03 20:01:50.709 [ INFO] codec: 'mpeg2video' encoder registered
      47. 2017-09-03 20:01:50.709 [ INFO] codec: 'mp2' encoder registered
      48. 2017-09-03 20:01:50.709 [ INFO] codec: 'aac' encoder registered
      49. 2017-09-03 20:01:50.709 [ INFO] codec: 'vorbis' encoder registered
      50. 2017-09-03 20:01:50.709 [ INFO] codec: 'libx264' encoder registered
      51. 2017-09-03 20:01:50.709 [ INFO] codec: 'libx265' encoder registered
      52. 2017-09-03 20:01:50.709 [ INFO] codec: 'libvpx' encoder registered
      53. 2017-09-03 20:01:50.709 [ INFO] codec: 'libvpx-vp9' encoder registered
      54. 2017-09-03 20:01:50.709 [ INFO] codec: 'libtheora' encoder registered
      55. 2017-09-03 20:01:50.709 [ INFO] codec: 'libvorbis' encoder registered
      56. 2017-09-03 20:01:50.709 [ INFO] codec: 'libopus' encoder registered
      57. 2017-09-03 20:01:50.709 [ INFO] codec: 'webtv-vp8' codec profile created
      58. 2017-09-03 20:01:50.709 [ INFO] codec: 'webtv-h264' codec profile created
      59. 2017-09-03 20:01:50.709 [ INFO] codec: 'webtv-vorbis' codec profile created
      60. 2017-09-03 20:01:50.709 [ INFO] codec: 'webtv-aac' codec profile created
      61. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'Canal Digitaal SD'
      62. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'Canal Digitaal HD'
      63. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'TV Vlaanderen SD'
      64. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'TV Vlaanderen HD'
      65. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'TéléSAT SD'
      66. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'TéléSAT HD'
      67. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'AustriaSat Astra1'
      68. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'Canal Digitaal HD'
      69. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'TV Vlaanderen HD'
      70. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'TéléSAT HD'
      71. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'AustriaSat Astra3'
      72. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'Skylink: Czech Republic'
      73. 2017-09-03 20:01:50.710 [ INFO] bouquet: new bouquet 'Skylink: Slovak Republic'
      74. 2017-09-03 20:01:50.811 [ INFO] scanfile: DVB-S - loaded 1 regions with 112 networks
      75. 2017-09-03 20:01:50.811 [ INFO] scanfile: DVB-T - loaded 44 regions with 1112 networks
      76. 2017-09-03 20:01:50.811 [ INFO] scanfile: DVB-C - loaded 17 regions with 57 networks
      77. 2017-09-03 20:01:50.811 [ INFO] scanfile: ATSC-T - loaded 2 regions with 11 networks
      78. 2017-09-03 20:01:50.811 [ INFO] scanfile: ATSC-C - loaded 1 regions with 5 networks
      79. 2017-09-03 20:01:50.811 [ INFO] scanfile: ISDB-T - loaded 2 regions with 1297 networks
      80. 2017-09-03 20:01:54.715 [ INFO] dvr: Creating new configuration ''
      81. 2017-09-03 20:01:54.715 [WARNING] access: Created default wide open access controle entry
      82. 2017-09-03 20:01:54.716 [ INFO] csa: Using SSE2 128bit parallel descrambling
      83. 2017-09-03 20:01:54.716 [ INFO] descrambler: adding CAID 2600/FFFF as ConstCW interval 10000ms pc 20 (BISS)
      84. 2017-09-03 20:01:54.716 [ INFO] descrambler: adding CAID 0E00/FFFF as MultiPID interval 1000ms pc 2 (PowerVu)
      85. 2017-09-03 20:01:54.716 [ INFO] epggrab: module eit created
      86. 2017-09-03 20:01:54.716 [ INFO] epggrab: module uk_freesat created
      87. 2017-09-03 20:01:54.716 [ INFO] epggrab: module uk_freeview created
      88. 2017-09-03 20:01:54.716 [ INFO] epggrab: module nz_freeview created
      89. 2017-09-03 20:01:54.716 [ INFO] epggrab: module viasat_baltic created
      90. 2017-09-03 20:01:54.716 [ INFO] epggrab: module Bulsatcom_39E created
      91. 2017-09-03 20:01:54.716 [ INFO] epggrab: module psip created
      92. 2017-09-03 20:01:54.722 [ INFO] epggrab: module opentv-skynz created
      93. 2017-09-03 20:01:54.722 [ INFO] epggrab: module opentv-skyuk created
      94. 2017-09-03 20:01:54.722 [ INFO] epggrab: module opentv-skyit created
      95. 2017-09-03 20:01:54.723 [ INFO] epggrab: module opentv-ausat created
      96. 2017-09-03 20:01:54.724 [ INFO] epggrab: module pyepg created
      97. 2017-09-03 20:01:54.724 [ INFO] epggrab: module xmltv created
      98. 2017-09-03 20:01:54.725 [ INFO] spawn: Executing "/usr/bin/tv_find_grabbers"
      99. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_file created
      100. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_wg created
      101. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_uk_bleb created
      102. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_dk_dr created
      103. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_il created
      104. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_is created
      105. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_tr created
      106. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_eu_egon created
      107. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_fr_kazer created
      108. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_se_tvzon created
      109. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_eu_dotmedia created
      110. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_na_dtv created
      111. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_se_swedb created
      112. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_eu_epgdata created
      113. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_huro created
      114. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_fi created
      115. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_ar created
      116. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_es_laguiatv created
      117. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_fr created
      118. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_nl created
      119. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_na_tvmedia created
      120. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_zz_sdjson created
      121. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_combiner created
      122. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_uk_tvguide created
      123. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_it created
      124. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_na_dd created
      125. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_zz_sdjson_sqlite created
      126. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_fi_sv created
      127. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_dtv_la created
      128. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_sd_json created
      129. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_ch_search created
      130. 2017-09-03 20:01:55.774 [ INFO] epggrab: module /usr/bin/tv_grab_pt_meo created
      131. 2017-09-03 20:01:55.774 [ NOTICE] START: HTS Tvheadend version 4.3-414~g994de3d9f started, running as PID:200 UID:911 GID:911, CWD:/var/run/s6/services/tvheadend CNF:/config
      Display All
      Also take a look to the booth screenshots, the web panel should be to find on 192.168.178.54:9982 or *9981? But there i get jut an basic error?!?
      Were is my mistake?


      Not to self-promote, but you may want to read this tutorial. You've also not mapped your directories correctly, and you've set them as read only, so the container won't be able to save any data (recordings). My tutorial doesn't cover TVH itself, but you can apply the info from that thread to your container as well.
    • nicjo814 wrote:

      Could you test (build) this locally on your end with the yet unreleased omvextras plugin where the "Docker CE" repo is present?
      I can't start an Ubuntu container. Might be a setting I put in though.
      omv 4.0.16 arrakis | 64 bit | 4.14 backports kernel | omvextrasorg 4.1.2
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please don't PM for support... Too many PMs!