Plex - Nicht außerhalb des Netzwerks verfügbar - Port?

  • Hey Leute!


    Ich habe über die OVM-Extras Plex installiert. Unter den Einstellungen im Web-Player (lokal) steht leider "Nicht ausserhalb Ihres Netzwerks verfügbar". Wie kann ich dies beheben? In meiner FritzBox (6490) habe ich den Port schon freigeben.



    Ich hoffe ihr könnt mir helfen :)


    Grüße
    fragkp

  • Du musst dass in deinem Router freischalten.
    An openmediavault muss da nicht gemachten werden.


    Du musst eine Portweiterleitung von deinem Router auf die IP und Port von deiner Plex OMV installation weiterreichen.


    Was hast du für nen Router?


    Edit: Mir ist gerade eingefallen, dass ich damals nur über die Eweiterten Einstellungen in Plex es hin bekommen habe,


    Gruß Robert

    OMV 5.x always up to date.
    Modded dell t20 into 19" rack case with Pearl LCD Display (Status Display!)

    xeon e3-1225v3 / 32GB RAM / 1x500GB WD Blue SSD (OS) / 1x250 SSD (not used) / 1x1 TB Toshiba HHD (MultiDisk) / 4x 4TB WD40EFRX (Raid5)

    Einmal editiert, zuletzt von no_Legend ()

  • Hab zwar ne fritzbox habe aber einen ipcop dazwischen.


    Also die Fritzbox ist wie bei dir installier dient aber nur als Kabel Modem.


    Hast du mal plex deaktiviert und wieder aktiviert?

    OMV 5.x always up to date.
    Modded dell t20 into 19" rack case with Pearl LCD Display (Status Display!)

    xeon e3-1225v3 / 32GB RAM / 1x500GB WD Blue SSD (OS) / 1x250 SSD (not used) / 1x1 TB Toshiba HHD (MultiDisk) / 4x 4TB WD40EFRX (Raid5)

  • Kannst du mal deine genauen Einstellungen der Fritzbox posten?
    Also eingehende Firewall und ausgehende?
    Jugendschutz aktiviert?


    Oben im Screenshot sehe ich NAS als namen, kontrolier mal ob die IP Adresse stimmt.
    Hoffe du hast deinem OMV Server eine feste IP gegeben.


    Gruß Robert

    OMV 5.x always up to date.
    Modded dell t20 into 19" rack case with Pearl LCD Display (Status Display!)

    xeon e3-1225v3 / 32GB RAM / 1x500GB WD Blue SSD (OS) / 1x250 SSD (not used) / 1x1 TB Toshiba HHD (MultiDisk) / 4x 4TB WD40EFRX (Raid5)

  • Die genaueren Einstellungen editiere ich heute Abend rein (nach der Arbeit).


    Soviel vorab:
    Der NAS hat eine feste IP


    Jugendschutz ist im Router auch nicht aktiviert.


    Grüße


  • Hast den Fehler gefunden?

    OMV 5.x always up to date.
    Modded dell t20 into 19" rack case with Pearl LCD Display (Status Display!)

    xeon e3-1225v3 / 32GB RAM / 1x500GB WD Blue SSD (OS) / 1x250 SSD (not used) / 1x1 TB Toshiba HHD (MultiDisk) / 4x 4TB WD40EFRX (Raid5)

  • Again, no changes.


    Is port 32400, the only port to share?


    From the setup info tab:


    OMV FirewallIf you are using OMVs firewall create rules to open the requisite ports on your LAN.UDP 1900 (discovery service for Plex DLNA Server) [required for PC, Android, standard DLNA clients]
    UDP 5353 (discovery service Plex DLNA Server for Bonjour/Avahi) [required for Apple clients]
    TCP 32400 (for access to Plex Media Server) [required]
    UDP 32410, 32412, 32413, 32414 (for current network discovery)
    TCP 32443 (for SSL access to Plex Media Server) [optional]
    TCP 32469 (for access to the Plex DLNA Server)
    Router SettingsForward the following ports from your router to OMV. These ports are used for remote access to your Plex Media Server.TCP 32400 (for access to Plex Media Server) [required]
    TCP 32443 (for SSL access to Plex Media Server) [optional]

  • For remote access yes... If OMV firewall is not being used all those ports should be open. But the only port you need top open on your router is TCP 32400.


    The other ports just need to be opened to the LAN if you are using the firewall.

  • No, you do not need to do anything with firewall if you have not been using it.


    I just did a test. The problem seems to be at the router. If you look at the picture it shows green arrow to the private address but red x from internet to public ip. I get same when i close port 32400 on my router.


    Are you sure you have your NAS ip correct in router? In the picture above is says NAS but does not show ip.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!