Communication failure on adding printer in CUPS

  • Hi there,


    I had to reformat the SD cart for the umpteenth time since OMV on RPi is so sensitive to power outages, and wanted to add my printer to it. However, it still ends in an unhelpful "communication failure" in the web GUI. It is directly connected to the RPi, no USB hub here.


    I don't have the option of selecting "Generic" or "Unknown" printer in order to manually select the driver.


    When I was trying to add it, Messages logged this, which seems unhelpful:

    Code
    Nov 22 22:07:46 pi-printer kernel: [  849.755189] usb 1-1.2: new full-speed USB device number 13 using dwc_otg
    Nov 22 22:07:46 pi-printer kernel: [  849.859831] usb 1-1.2: New USB device found, idVendor=04e8, idProduct=327e
    Nov 22 22:07:46 pi-printer kernel: [  849.859873] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    Nov 22 22:07:46 pi-printer kernel: [  849.859896] usb 1-1.2: Product: Samsung ML-2510 Series
    Nov 22 22:07:46 pi-printer kernel: [  849.859915] usb 1-1.2: Manufacturer: Samsung
    Nov 22 22:07:46 pi-printer kernel: [  849.859931] usb 1-1.2: SerialNumber: .
    Nov 22 22:07:46 pi-printer kernel: [  849.869946] usblp 1-1.2:1.0: usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x04E8 pid 0x327E


    How would I know what is going wrong with CUPS on OMV?

    • Offizieller Beitrag

    This isn't an OMV issue. It is a CUPS driver issue. You might try these drivers.

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!