Hi all,
Today, OMV is woke up on time, but somehow I can't access via WAN or LAN.
At first I thought my dual-port adapter is failed or something.
After I went home, I check the NIC, and my dual-port adapter are online.
But I can't access OMV via Putty or web browser at all.
Therefore, I did a hard shutdown, and turn it back on, and it's working fine.
When I look into the Syslog, and Messages, I don't see the history or error for the boot time today.
OMV woke up at 4PM today, but there is no log for it.
It only showed the log that I manually turned on.
FYI: My OMV is connecting directly to modem/router.
Edit: once in a while OMV didn't go sleep with cron job scheduled, and can't be accessed from SSH or web browser too.
Code
cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: load balancing (round-robin)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 200
Down Delay (ms): 200
Slave Interface: eth0
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 08:62:66:c7:3c:af
Slave queue ID: 0
Slave Interface: eth4
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:15:17:2e:40:e7
Slave queue ID: 0Code
Linux server 3.16.0-0.bpo.4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u6~bpo70+1 (2015-11-11) x86_64 GNU/LinuxCode
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 state UP qlen 1000
link/ether 08:62:66:c7:3c:af brd ff:ff:ff:ff:ff:ff
3: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:15:17:2e:40:e6 brd ff:ff:ff:ff:ff:ff
4: eth4: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 state UP qlen 1000
link/ether 08:62:66:c7:3c:af brd ff:ff:ff:ff:ff:ff
5: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether 08:62:66:c7:3c:af brd ff:ff:ff:ff:ff:ff
inet 192.168.1.97/24 brd 192.168.1.255 scope global bond0
valid_lft forever preferred_lft forever
6: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN
link/ether 02:42:b6:ac:88:fc brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 scope global docker0
valid_lft forever preferred_lft forever
7: as0t0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 200
link/none
inet 172.27.224.1/20 brd 172.27.239.255 scope global as0t0
valid_lft forever preferred_lft forever