Hello folks,
since I installed OMV on my NAS, I found out that, no matter how I do it, if I copy from/to the NAS several files, it stucks after 5/7 minutes and I need to completely reboot it.
SSH stops working as well any other service.
Only pressing the rear on/off button shuts down the device.
This happens ONLY when I copy files. How do I troubleshoot this issue?
Thank you!
file transfer issue OMV on IOMEGA Home Media Network
-
- OMV 2.x
- theluke79
-
-
I am having the same problem, althoug it's another system configuration (hardware).
On both of my NAS I try to copy files the network of the NAS just drops after a few seconds. NAS is not rechable via network after that and I can only reboot the NAS.
I tried it either via FreeFileSync as well as via Explorer / SpeedCommander.This error happens on either my HP Proliant Gen8 Microserver as well as on a "self-built" Nas with an Asrock mainboard.
Every other network operation is doing just fine (streaming etc.).
Any help is appreciated.
Regards,
Jaxxon -
Hello folks, the issue is getting worse. I do not know myself a way to recreate it and show errors code (if any). Now even during massive torrent download session, it just get stuck. I am quite sick of it, it happens via usb or lan. I suspect it is a hardware problem. I am going to call the death of the nas and try to salvage the disk.
-
Is the OS installed on the hard drive?
-
Is the OS installed on the hard drive?
In my case the OS is installed on a MX-ES series MXUB3SES-16G - USB-Flash-Drive
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!