Hi,
i am trying to install OMV 2.1 on a machine with a NVMe device.
During installation only a bootable USB drive that i made with rufus and the NVMe are connected.
The installation routine successfully installs the network.
After that i get the following error message:
Partition(s) 1 on /dev/sda have been written; but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result the old partition(s) will remain in use.
You should reboot now before doing further changes. ERROR!!!
I do a rebbot as recommended and the system does no more boot from the USB drive.
I don't get any prompt to choose a device to install on.
So i guess that /dev/sda is my USB drive and the installation routine does changes on it. This of course explains why it is in use and why i cannot boot from it afterwards. However i wonder why i cannot choose my intended installation device (the NVMe device) during installation.
Can someone please give me a hint how i can choose the intended device for installation? Whether i need to include an extra driver for the installation and if so where i can find a guid how to do it?
Thanks.