SNAPRAID+AUFS Replacing disks

    • OMV 2.x
    • Resolved
    • Source Code

      1. ​fdisk -l /dev/sdh
      2. WARNING: GPT (GUID Partition Table) detected on '/dev/sdh'! The util fdisk doesn't support GPT. Use GNU Parted.
      3. Disk /dev/sdh: 2000.4 GB, 2000398934016 bytes
      4. 255 heads, 63 sectors/track, 243201 cylinders, 3907029168 sectores en total
      5. Units = sectores of 1 * 512 = 512 bytes
      6. Sector size (logical/physical): 512 bytes / 4096 bytes
      7. I/O size (minimum/optimal): 4096 bytes / 4096 bytes
      8. Identificador del disco: 0x00000000
      9. Disposit. Inicio Comienzo Fin Bloques Id Sistema
      10. /dev/sdh1 1 3907029167 1953514583+ ee GPT
      11. Partition 1 does not start on physical sector boundary.
      Display All


      Sorry I didn't see your request until now.
    • I don't know why it won't resize. It should. I guess try in partedmagic again.
      omv 4.1.14 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.13
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • I wouldn't use the parity disk for aufs.

      Your root / folder has .debs in it? How did they get there? No, it isn't normal.

      Exact errors would be helpful. You would probably see dkms errors (or warnings) if you have virtualbox or zfs installed.
      omv 4.1.14 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.13
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • Hello, I am replying to this old thread cause I tried to do the same thing (replacing an old drive with a new one).

      So basically my setup is as follows:

      SnapRAID with unionfilesystems on OMV 4.1.11 Arrakis

      5 drives on right now named (not cool) but in a way I can remember. - Can I change the names without killing the raid?
      [IMG:https://cl.ly/bf350fed6cfd/Screenshot%2525202018-10-22%252520at%25252011.21.26%252520PM.png]

      alpha is sdd(4tb) beta is sdc(3tb) delta is sda(2tb) epsilon (2tb) sde and gama (3tb) sdf.

      My current file system is:

      [IMG:https://cl.ly/2b6581b8042f/Screenshot%2525202018-10-22%252520at%25252011.25.41%252520PM.png]
      All my names changed when I remove an old 30gb SSD and moved to a new one 240gb. My new names (if I can change them) would be size-3lastSNdigits of each disk etc.

      What I need to do now is to replace the sda (2tb) - delta with a 4tb disk and after that to replace sde (2tb) epsilon with another drive. Is that easy? I have run the check and sync and everything seems to be okay now. So what I should do first? Can I just copy the snapraid files on another external disk and then swap the old disk with the new ones the copy back the files and run sync check or there is another way to do it?

      I am using all 6 sata ports of the motherboard so if I need to put another disk and do things on old and new raid disk at the same time the new disk must be connected as external..

      Any help would be great!
      Thanks in advance