Errors with update

  • Whit OMV 2.19 I get this errors:



    Thanks in advance for your help. :thumbup:
    ==============
    1 USB Stick Kingston HyperX Fury 16GB (USB 3.0 90MB/s Read - 30MB/s Write)
    2 HDD WD Blue 320GB RAID2
    4 HDD WD Green 1TB RAID5

    • Offizieller Beitrag

    reboot and run apt clean from omv-extras.

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Nothing! :(
    Errors with apt-clean and then in updating.


    Thanks in advance for your help. :thumbup:
    ==============
    1 USB Stick Kingston HyperX Fury 16GB (USB 3.0 90MB/s Read - 30MB/s Write)
    2 HDD WD Blue 320GB RAID2
    4 HDD WD Green 1TB RAID5

    • Offizieller Beitrag

    What is the output of:


    dpkg -l | grep -v ^ii


    I hope you have the flashmemory plugin installed as well...

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Offizieller Beitrag


    Apt clean does step #1 and #2 which is the main part of the fix on that page.

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • What is the output of:


    dpkg -l | grep -v ^ii


    Code
    :~# dpkg -l | grep -v ^ii
    Desired=Unknown/Install/Remove/Purge/Hold
    | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
    |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
    ||/ Name                               Version                       Architecture Description
    +++-==================================-=============================-============-=====================================================================================
    rc  libgd2-noxpm:amd64                 2.0.36~rc1~dfsg-6.1+deb7u1    amd64        GD Graphics Library version 2 (without XPM support)
    iF  openmediavault                     2.1.19                        all          Open network attached storage solution


    I hope you have the flashmemory plugin installed as well...


    Yes

    Thanks in advance for your help. :thumbup:
    ==============
    1 USB Stick Kingston HyperX Fury 16GB (USB 3.0 90MB/s Read - 30MB/s Write)
    2 HDD WD Blue 320GB RAID2
    4 HDD WD Green 1TB RAID5

    • Offizieller Beitrag

    The openmediavault package didn't finish installing. Try: dpkg --configure -a If that doesn't work, apt-get -f install Post output of any errors.

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • The openmediavault package didn't finish installing. Try: dpkg --configure -a If that doesn't work, apt-get -f install Post output of any errors.


    Thanks in advance for your help. :thumbup:
    ==============
    1 USB Stick Kingston HyperX Fury 16GB (USB 3.0 90MB/s Read - 30MB/s Write)
    2 HDD WD Blue 320GB RAID2
    4 HDD WD Green 1TB RAID5

    • Offizieller Beitrag

    That bug was fixed in 2.1.23. Try the following (as root):


    wget http://packages.openmediavault.org/public/pool/main/o/openmediavault/openmediavault_2.1.25_all.deb
    dpkg -i openmediavault_2.1.25_all.deb

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • No, after these commands there are always errors updating OMV


    Here the result of the commands
    I used the default option (N)


    Thanks in advance for your help. :thumbup:
    ==============
    1 USB Stick Kingston HyperX Fury 16GB (USB 3.0 90MB/s Read - 30MB/s Write)
    2 HDD WD Blue 320GB RAID2
    4 HDD WD Green 1TB RAID5

    • Offizieller Beitrag

    What is the output of:


    service postfix start
    service postfix status

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!