Current configuration:
AMD Athlon 5350 APU
ASRock AM1H-ITX mobo
PNY CS1311 SSD 120GB 6GB/s TLC (for boot only)
8GB Crucial Ballistix Sport DDR3 1600 x1
Thermaltake Core V1 case with 200mm front fan
External Toshiba 90w PSU brick
OMV version: Release: 2.2.1
Kernel: Linux openmediavault 3.2.0-4-amd64 #1 SMP Debian 3.2.73-2+deb7u2 x86_64 GNU/Linux
SSD shows in SMART monitoring gui a temperature of 100°C
How can this be, the operating temperature should be between 0°C - 70°C ?
Is OMV responsible for reading from wrong SMART ID? It appears to be reading ID 231 instead of ID 194:
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
9 Power_On_Hours -O--C- 100 100 000 - 26
12 Power_Cycle_Count -O--C- 100 100 000 - 94
168 Unknown_Attribute -O--C- 100 100 000 - 0
170 Unknown_Attribute PO---- 100 100 010 - 120
173 Unknown_Attribute -O--C- 100 100 000 - 1
192 Power-Off_Retract_Count -O--C- 100 100 000 - 64
194 Temperature_Celsius PO---K 070 070 030 - 30 (Min/Max 30/30)
218 Unknown_Attribute PO-R-- 100 100 050 - 0
231 Temperature_Celsius PO--C- 100 100 000 - 100
241 Total_LBAs_Written -O--C- 100 100 000 - 74
Initially I had the case fan disconnected, after seeing this SSD temp level I reconnected but still shows incorrect value.
Now it's possible since I'm new to OMV I've checked/unchecked some setting causing this to report wrong, but I don't think so.
**** Update ****
For what it's worth, I added a WD Red 2TB drive and it doesn't have this problem. It indicates an accurate temperature. So, perhaps it's something with the PNY SSD as a boot drive is putting out and not OMV.
Thanks.