OMV 2 Kernel 4.x Image

    • OMV 2.x
    • Update
    • OMV 2 Kernel 4.x Image

      Hi,

      for all of you that want to have their a 4.x kernel running OMV 2 you can download them here.

      Current 4.6 (Do not Upgrade to 4.6, if you need VirtualBOX - Currently there is an issue with the DKMS. If you want still to run it, manually apply this patch for the kernel driver)
      Current 4.5
      Current 4.4

      Installation with: dpkg -i linux-*.deb

      You should install headers & image. On top I suggest before moving from kernel 3.X to 4.X to install the btrfs tools.
      You can load them here, and install via dpkg -i <PAKAGENAME>

      This images include the e1000 modules and the USB modules to boot from a USB Stick or disk.

      For all baytrail users, they are stuggeling with system crashes on kernels > 3.10 (compare this link) please limit the max c_states = 1 in the Bios or via Grub, to get a stable NAS again.

      Have fun.
      ----------------------

      visit my blog here!
      OMV v2.2.x (kernel 4.5.X) | ASRock Q1900M | 32GB RAM | Sandisk SSD | Marvell PCIe SATA|Controler (88SE9230) | 4x3TB RAID5

      The post was edited 6 times, last by Silverchair_mfcu ().

    • As a quick sidenote this kernels have as well the support to boot from USB 2 & 3.
      So therefore qou will not rcive the message:


      Source Code

      1. ​Dropping to Shell!
      2. modprobe: module ehci-orion not found in modules.dep
      ----------------------

      visit my blog here!
      OMV v2.2.x (kernel 4.5.X) | ASRock Q1900M | 32GB RAM | Sandisk SSD | Marvell PCIe SATA|Controler (88SE9230) | 4x3TB RAID5
    • Your kernel seems to work: When will OMV3 be ready :thumbsup:

      Greetings Hoppel
      ---------------------------------------------------------------------------------------------------------------
      frontend software - tvos | android tv | libreelec | win10 | kodi krypton
      frontend hardware - appletv 4k | nvidia shield tv | odroid c2 | yamaha rx-a1020 | quadral chromium style 5.1 | samsung le40-a789r2
      -------------------------------------------
      backend software - debian | openmediavault | latest backport kernel | zfs raid-z2 | docker | emby | unifi | vdr | tvheadend | fhem
      backend hardware - supermicro x11ssh-ctf | xeon E3-1240L-v5 | 64gb ecc | 8x10tb wd red | digital devices max s8
      ---------------------------------------------------------------------------------------------------------------------------------------
    • Hi,

      the difference --> j1900 is, that I tested this with my j1900.

      Since Kernel 3.10 the barebone systems has an issue in the intel c-State handling. Basically with changing the grub bot parameter this kernel work as well for barebones.
      For all others, you do not need to care.

      Besides that I saw on my system running some VM more stability after upgrading to 4.x.
      Nevertheless the Powerconsumption went up since kernel 4.x on my j1900.

      I use this kernels 4.4.4 now in Production environments without any issues.
      ----------------------

      visit my blog here!
      OMV v2.2.x (kernel 4.5.X) | ASRock Q1900M | 32GB RAM | Sandisk SSD | Marvell PCIe SATA|Controler (88SE9230) | 4x3TB RAID5
    • Also you can compile your own kernel (see Kernel 4.x wanted, running OMV 1.19)
      I'm using kernel 4.5.2 on omv 2.2.3. It seems a little faster. Also I enabled dvb support (also i2c mux) wich kernel 3.16 doesn't have.
      Just give a try making your own.... :thumbup:
      My business server: OMV 3.0.91 | intel J2900 + 4GB DDR3 | 64GB SSD OS Disk | 2x1TB WD raid data disks
      Home Server: File server, FTP, Printing server, Plex, Logitech Media Server, VDR, Minecraft Server, Ark Survival Server, jDownloader: OMV 3.0.91 (kernel 4.10 custom
      ) | MSI B150M PRO VDH | i5-6600T 35W | 16GG RAM DDR4 2133 | 60GB SSD OS disk | 120GG SSD Games (Minecraft+Ark)| 1x4TB+2x2TB WD NAS RED HDDs
      Home automation server: OMV 3.0.63 (kernel 4.x) | RaspBerry Pi 3 | 32Gb microSD Sandisk Xtreme | USB-RS485 | mbusd MODBUS TCP<->RTU GATEWAY | HMI SCADA myscadaHome
    • adityaxavier wrote:

      Hi,

      Is there any possibility to have an OMV 2.2 ISO Image with Kernel 4.4 prebuilt ? Because the current ISO (3.16 Kernel) does not detect my NIC Card and probably other functionalities as well because my NAS is Skylake based and is Headless.

      Can use OMV 3.0 but don't want to take my only backup on a Beta :)


      Maybe it's a possibility for you to do this: When will OMV3 be ready

      As you can read in that thread, this works!

      Greetings Hoppel
      ---------------------------------------------------------------------------------------------------------------
      frontend software - tvos | android tv | libreelec | win10 | kodi krypton
      frontend hardware - appletv 4k | nvidia shield tv | odroid c2 | yamaha rx-a1020 | quadral chromium style 5.1 | samsung le40-a789r2
      -------------------------------------------
      backend software - debian | openmediavault | latest backport kernel | zfs raid-z2 | docker | emby | unifi | vdr | tvheadend | fhem
      backend hardware - supermicro x11ssh-ctf | xeon E3-1240L-v5 | 64gb ecc | 8x10tb wd red | digital devices max s8
      ---------------------------------------------------------------------------------------------------------------------------------------
    • OMV 2 Kernel 4.x Image

      Is it possible to use a kernel from debian jessie (backports) on a debian wheezy system?

      If not, where are the differences between a kernel for wheezy and a kernel for jessie?
      ---------------------------------------------------------------------------------------------------------------
      frontend software - tvos | android tv | libreelec | win10 | kodi krypton
      frontend hardware - appletv 4k | nvidia shield tv | odroid c2 | yamaha rx-a1020 | quadral chromium style 5.1 | samsung le40-a789r2
      -------------------------------------------
      backend software - debian | openmediavault | latest backport kernel | zfs raid-z2 | docker | emby | unifi | vdr | tvheadend | fhem
      backend hardware - supermicro x11ssh-ctf | xeon E3-1240L-v5 | 64gb ecc | 8x10tb wd red | digital devices max s8
      ---------------------------------------------------------------------------------------------------------------------------------------

      The post was edited 1 time, last by hoppel118 ().

    • hoppel118 wrote:

      adityaxavier wrote:

      Hi,

      Is there any possibility to have an OMV 2.2 ISO Image with Kernel 4.4 prebuilt ? Because the current ISO (3.16 Kernel) does not detect my NIC Card and probably other functionalities as well because my NAS is Skylake based and is Headless.

      Can use OMV 3.0 but don't want to take my only backup on a Beta :)


      Maybe it's a possibility for you to do this: When will OMV3 be ready

      As you can read in that thread, this works!

      Greetings Hoppel


      I understand, but i believe that to be a workaround. Ideally, there should be a new release which is done more like a stop-gap before OMV 3 is release with OMV 2 but with a newer kernel ( Just supporting new hardware ). The Kernel provided in the ISO is extremely "OLD" w.r.t. computer evolution. Personally i believe it requires a better release management. OMV 2 iso should be updated every few months with at least new packages ( apt-get dist-upgrade ). Why release an ISO with known extremely old packages ?

      Is there any way we can update the ISO ? I mean creating an ISO from scratch ?

      Still, i believe the developers are doing a fabulous job with this OS. It is one of the best out there :)
    • Did you upgraded from kernel 3.16. Maybe this has 2 reasones, wither the C1E states are messing up or this is an firmware issue. I will check tomorrow on my build system.

      In the meantime you could check the C1E states in the Bios.
      ----------------------

      visit my blog here!
      OMV v2.2.x (kernel 4.5.X) | ASRock Q1900M | 32GB RAM | Sandisk SSD | Marvell PCIe SATA|Controler (88SE9230) | 4x3TB RAID5
    • Hi,

      I added the e1000 modules into the kernel, not using this as external module. You can download this version here.
      If you are intresseted in the compilation log, you can check this here.
      ----------------------

      visit my blog here!
      OMV v2.2.x (kernel 4.5.X) | ASRock Q1900M | 32GB RAM | Sandisk SSD | Marvell PCIe SATA|Controler (88SE9230) | 4x3TB RAID5