Hallo,
ich habe auf einem Proliant MicroServer Gen8 mit 12GB ECC-Ram eine System-HDD (40GB, ext4 in Bay1 für OMV) und eine WD-RED 4TB mit ZFS als Daten-Platte.
Bisher habe ich erfolgreich den ZFS-Pool erfolgreich importiert (erstellt mit freeNAS), ein Samba/Cifs-Share erzeugt, user und Gruppe angelegt. Wenn ich jetzt ein NFS-Share anlegen will, so erscheint mit der Übernahme der Konfiguration statt der erhofften Erfolgsmeldung nur der folgende Fehler:
Failed
to execute command 'export LANG=C; monit -t 2>&1':
/etc/monit/conf.d/openmediavault-filesystem.conf:12: Error: syntax error
'"legacy"'
Fehler #4000:
exception 'OMVException' with message 'Failed to execute command 'export LANG=C; monit -t 2>&1': /etc/monit/conf.d/openmediavault-filesystem.conf:12: Error: syntax error '"legacy"'' in /usr/share/openmediavault/engined/module/monit.inc:56
Stack trace:
#0 /usr/share/openmediavault/engined/rpc/config.inc(180): OMVModuleMonit->applyConfig()
#1 [internal function]: OMVRpcServiceConfig->applyChanges(Array, Array)
#2 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array)
#3 /usr/share/php/openmediavault/rpcservice.inc(158): OMVRpcServiceAbstract->callMethod('applyChanges', Array, Array)
#4 /usr/share/openmediavault/engined/rpc/config.inc(224): OMVRpcServiceAbstract->callMethodBg('applyChanges', Array, Array)
#5 [internal function]: OMVRpcServiceConfig->applyChangesBg(Array, Array)
#6 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array)
#7 /usr/share/php/openmediavault/rpc.inc(79): OMVRpcServiceAbstract->callMethod('applyChangesBg', Array, Array)
#8 /usr/sbin/omv-engined(500): OMVRpc::exec('Config', 'applyChangesBg', Array, Array, 1)
#9 {main}
Alles anzeigen
Bitte um Hilfe. Danke.
Gruß, Christoph
------
Short englich problem description:
System is a HP Proliant MicroServer Gen8 with 12GB memory an actually one WD RED 4TB (in bay4) and a small (40GB) hdd as omv-system-disk.
On the data-hdd is a zfs-pool, created with freeNAS and importet to omv.
There is only one user actually, services just ssh and smb/cifs succesfull running.
Now I want to configure a nfs-share, but when I save the settings and press activating (?) in the yellow message on top, I get just the above quoted error-message.
Please help.
Greetz, Christoph