[SOLVED] Installation Bootstrap error

1. offizieller Beitrag

    Hi all, I'm new here and my english is awful.
    I'm trying to install OMV on my nas:


    Asrock N3700-itx, 8gb ram, 2x HD WD Red 3tb


    During the installation a message appears:


    Failure trying to run: chroot /target mount -t proc proc /proc


    What can I do?
    I tried to follow this guide


    http://wiki.openmediavault.org/index.php?title=Installation


    but, when I open the shell and write first command (chroot /target), a message appears


    chroot: can't execute '/bin/sh' : No such file or directory


    Last information: I've installed the iso on a pendrive with unetbootin and I'm installing OMV on another pendrive


    Can someone help me?
    Thanks in advance

    • Offizieller Beitrag

    Try OMV 3.x

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Your problem is just that, you are doing install from pendrive to pendrive. It is a known issue.
    I only can sugest either install on harddrive, or get a USB CD/DVD drive and use that to install.
    Apparently omv installer gets confused when you do a flash drive to flash drive install and tries to chroot the folder on source drive rather than target.


    Sent from my SGH-T889 using Tapatalk

    omv 3.0.56 erasmus | 64 bit | 4.7 backport kernel
    SM-SC846(24 bay)| H8DME-2 |2x AMD Opteron Hex Core 2431 @ 2.4Ghz |49GB RAM
    PSU: Silencer 760 Watt ATX Power Supply
    IPMI |3xSAT2-MV8 PCI-X |4 NIC : 2x Realteck + 1 Intel Pro Dual port PCI-e card
    OS on 2×120 SSD in RAID-1 |
    DATA: 3x3T| 4x2T | 2x1T

    Thanks for the answers.
    So if I install from CD to pendrive, it should go well.
    I haven't a CD/DVD driver on Nas but I could try with my notebook.
    I try and tell you the result.

    well, if the issue you are having is in fact problem with OMV install confusing source/target drives (and it sounds like it)
    than yes using cd/dvd will solve the issue.
    also I was thinking more more of using an external Cd/DVD drive on the NAS.
    but if you do not have it you can try on your laptop.


    what you can also try is check the step after which you get the message and simply pull the source pendrive out.
    the thing is that after a certain percent of install process is done source drive is not needed anymore and can be removed safely without install interruption. also, if when you get the error you have an option to try again, just pull out the source drive and try again.


    might work...


    PS>> if you want to try the option above please make sure you mark the target drive carefully so you do not pull -it- out by mistake :)

    omv 3.0.56 erasmus | 64 bit | 4.7 backport kernel
    SM-SC846(24 bay)| H8DME-2 |2x AMD Opteron Hex Core 2431 @ 2.4Ghz |49GB RAM
    PSU: Silencer 760 Watt ATX Power Supply
    IPMI |3xSAT2-MV8 PCI-X |4 NIC : 2x Realteck + 1 Intel Pro Dual port PCI-e card
    OS on 2×120 SSD in RAID-1 |
    DATA: 3x3T| 4x2T | 2x1T

    Negative. Doesn't work.
    I start the installation from an external cd drive connected directly to nas, target pendrive.
    Same error.


    Bootstrap alert
    Failure trying to run: chroot /target mount -t proc proc /proc


    The installation hangs at base system installation.
    What can I do?
    Some Ideas?

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden