ok i set the static adress. But the issue after PXE-Boot is still persist.
i took a snapshoot.
OMV 3.0 dnsmasq Plugin
-
-
But the issue after PXE-Boot is still persist.
In the PXE plugin, do you see the field that has the text <Your_NFS_Export> in it? You need to replace that with your nfs info.
-
i didn't see it.
*update
i found it, but i didn't know what i typed in...my folder for the PXE-Images is "192.168.174.43\pxe\clonzilla...." (SMB-Path)
-
my folder for the PXE-Images is "192.168.174.43\pxe\clonzilla...." (SMB-Path)
You can't use samba for pxe images.
-
NFS is faster than Samba.
-
ok i understand this. But i have no idea where i get this info.
who can i find the correct path?the syntax is "IP:<Your_NFS_Export>/clonezilla..." correct? But what comes after the ip adress?
-
the syntax is "IP:<Your_NFS_Export>/clonezilla..." correct? But what comes after the ip adress?
We can't answer this for you. You have to have a nfs share created and we don't know what that is called. But if you enable nfs and create an nfs share from the same shared folder that you use in the pxe plugin settings tab (lets call it pxefolder) and your server's ip address is 192.168.174.43 then that part of the line would be: 192.168.174.43:/export/pxefolder
I suggest reading a bit more about pxe booting and nfs shares. The plugin can't do everything to setup the images.
-
Hello, the "export" has been added, also adding the "fetch"-parameter
fetch=tftp://192.168.174.43/clonezilla/2.3.2-22/live/x86_32_i586/live/filesystem.squashfsnow is functional. Thanks for help!
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!