Upgrade to OMV3 from 2 missing GUI, tried to uninstall/reinstall

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Upgrade to OMV3 from 2 missing GUI, tried to uninstall/reinstall

      Upgraded from 2 which looked successful, but I couldn't get any response from GUI. I troubleshot various "cures", but finally decided I should have uninstalled all the plugins before the update. I then CLI to uninstall plugins and then uninstalled OMV. I ran:

      Source Code

      1. apt-get install openmediavault
      Ign ftp.us.debian.org jessie InRelease
      Hit ftp.us.debian.org jessie-updates InRelease
      Hit ftp.us.debian.org jessie Release.gpg
      Hit ftp.us.debian.org jessie Release
      Hit security.debian.org jessie/updates InRelease
      Ign packages.openmediavault.org erasumus InRelease
      Hit ftp.us.debian.org jessie-updates/contrib Sources
      Get:1 ftp.us.debian.org jessie-updates/main amd64 Packages/DiffIndex [5,932 B]
      Hit ftp.us.debian.org jessie-updates/contrib amd64 Packages
      Get:2 ftp.us.debian.org jessie-updates/non-free amd64 Packages/DiffIndex [736 B]
      Hit ftp.us.debian.org jessie-updates/contrib Translation-en
      Get:3 ftp.us.debian.org jessie-updates/main Translation-en/DiffIndex [2,704 B]
      Ign packages.openmediavault.org erasumus Release.gpg
      Get:4 ftp.us.debian.org jessie-updates/non-free Translation-en/DiffIndex [736 B]
      Hit ftp.us.debian.org jessie-updates/main Sources
      Hit ftp.us.debian.org jessie-updates/non-free Sources
      Hit ftp.us.debian.org jessie/main Sources
      Hit ftp.us.debian.org jessie/main amd64 Packages
      Hit ftp.us.debian.org jessie/main Translation-en
      Ign packages.openmediavault.org erasumus Release
      Hit security.debian.org jessie/updates/non-free Sources
      Hit security.debian.org jessie/updates/non-free amd64 Packages
      Hit security.debian.org jessie/updates/non-free Translation-en
      Hit security.debian.org jessie/updates/main Sources
      Hit security.debian.org jessie/updates/contrib Sources
      Hit security.debian.org jessie/updates/main amd64 Packages
      Hit security.debian.org jessie/updates/contrib amd64 Packages
      Hit security.debian.org jessie/updates/contrib Translation-en
      Hit security.debian.org jessie/updates/main Translation-en
      Err packages.openmediavault.org erasumus/main amd64 Packages 404 Not Found
      Ign packages.openmediavault.org erasumus/main Translation-en_US
      Ign packages.openmediavault.org erasumus/main Translation-en
      Fetched 10.1 kB in 4s (2,076 B/s)
      W: Failed to fetch packages.openmediavault.org/pu…ain/binary-amd64/Packages 404 Not Foud
      E: Some index files failed to download. They have been ignored, or old ones used instead.

      --------------------------------------------------------------------
      The only line in my /etc/apt/sources.list.d/openmediavault.list file is:

      deb packages.openmediavault.org/public erasmus main
      ----------------------------------------------------------------------

      It looks like the path to get the OMV files is wrong, but I can't seem find a fix. I hope I haven't totally bolluxed this up, but as a noob, I'm stuck.

      Thanks in advance.

      Kevin

      Dell Precision 670: 4 XEON CPUs, dedicated system internal hard drive, one internal storage drive, and two external USB harddrives.
      Dell Precision 670: 4 XEON CPUs, dedicated system internal hard drive,one internal storage drive, and two external USB harddrives
    • Two things
      1) sorry I posted this in the "Announcements" section, I was aiming for Installations: Updates/Upgrades. I don't see a way to move it so I'll assume one of the moderators can put it in the right spot.
      2) I found ryecoaaron's post Guide to install on Deb 8.x Jessie? and tried his instructions. After executing apt-get install openmediavault:


      Do you want to continue? [Y/n] y
      Setting up samba (2:4.2.10+dfsg-0+deb8u3) ...
      Job for smbd.service failed. See 'systemctl status smbd.service' and 'journalctl -xn' for details.
      invoke-rc.d: initscript smbd, action "start" failed.
      dpkg: error processing package samba (--configure): subprocess installed post-installation script returned error exit status 1
      dpkg: dependency problems prevent configuration of openmediavault: openmediavault depends on samba; however: Package samba is not configured yet.


      dpkg: error processing package openmediavault (--configure):
      dependency problems - leaving unconfigured
      E: Sub-process /usr/bin/dpkg returned an error code (1)

      root@Winnie2:~# systemctl status smbd.service
      ● smbd.service - LSB: start Samba SMB/CIFS daemon (smbd)
      Loaded: loaded (/etc/init.d/smbd)
      Active: failed (Result: exit-code) since Mon 2016-10-31 16:30:28 EDT; 4min 46s ago
      Process: 1403 ExecStart=/etc/init.d/smbd start (code=exited, status=1/FAILURE)


      Oct 31 16:30:28 Winnie2 smbd[1403]: Starting SMB/CIFS daemon: smbd failed!
      Oct 31 16:30:28 Winnie2 systemd[1]: smbd.service: control process exited, code=exited status=1
      Oct 31 16:30:28 Winnie2 systemd[1]: Failed to start LSB: start Samba SMB/CIFS daemon (smbd).
      Oct 31 16:30:28 Winnie2 systemd[1]: Unit smbd.service entered failed state.


      root@Winnie2:~# journalctl -xn
      -- Logs begin at Mon 2016-10-31 16:21:20 EDT, end at Mon 2016-10-31 16:35:40 EDT. --
      Oct 31 16:34:40 Winnie2 systemd[1]: Starting The OpenMediaVault engine daemon that processes the RPC reque
      st...
      -- Subject: Unit openmediavault-engined.service has begun with start-up
      -- Defined-By: systemd
      -- Support: lists.freedesktop.org/mailman/listinfo/systemd-devel
      --
      -- Unit openmediavault-engined.service has begun starting up.
      Oct 31 16:34:40 Winnie2 systemd[1]: openmediavault-engined.service: Supervising process 1479 which is not our child. We'll most likely not notice when it exits.
      Oct 31 16:34:40 Winnie2 systemd[1]: Started The OpenMediaVault engine daemon that processes the RPC request.
      -- Subject: Unit openmediavault-engined.service has finished start-up
      -- Defined-By: systemd
      -- Support: lists.freedesktop.org/mailman/listinfo/systemd-devel--
      -- Unit openmediavault-engined.service has finished starting up.--
      -- The start-up result is done.
      Oct 31 16:34:40 Winnie2 systemd[1]: openmediavault-engined.service: main process exited, code=exited, status=255/n/a
      Oct 31 16:34:40 Winnie2 systemd[1]: Unit openmediavault-engined.service entered failed state.
      Oct 31 16:35:10 Winnie2 monit[875]: 'omv-engined' failed to start (exit status 0) -- no output
      Oct 31 16:35:40 Winnie2 monit[875]: 'shairport-sync' process is not running
      Oct 31 16:35:40 Winnie2 monit[875]: 'shairport-sync' trying to restart
      Oct 31 16:35:40 Winnie2 monit[875]: 'shairport-sync' start: /bin/systemctl
      Oct 31 16:35:40 Winnie2 systemd[1]: Started LSB: Shairport Synchronous AirPlay.
      -- Subject: Unit shairport-sync.service has finished start-up
      -- Defined-By: systemd
      -- Support: lists.freedesktop.org/mailman/listinfo/systemd-devel--
      -- Unit shairport-sync.service has finished starting up.--
      -- The start-up result is done.
      Dell Precision 670: 4 XEON CPUs, dedicated system internal hard drive,one internal storage drive, and two external USB harddrives
    • Thanks, Your are correct except that I didn't actually "chose" the location, but I did recognize it wasn't the right spot, but don't know how to move it. Moderators?
      Dell Precision 670: 4 XEON CPUs, dedicated system internal hard drive,one internal storage drive, and two external USB harddrives
    • Hi,
      Still playing around with 3.0, but haven't gotten it installed/running properly. I keep getting "MDADM.CONF defines no arrays" and when I try to log on to the GUI I get Error Message and here's the details:
      Error #0:exception 'OMV\Rpc\Exception' with message 'Failed to connect to socket: No such file or directory' in /usr/share/php/openmediavault/rpc/rpc.inc:138
      Stack trace:
      #0 /var/www/openmediavault/rpc/session.inc(56): OMV\Rpc\Rpc::call('UserMgmt', 'authUser', Array, Array, 2, true)#1 [internal function]: OMVRpcServiceSession->login(Array, Array)
      #2 /usr/share/php/openmediavault/rpc/serviceabstract.inc(124): call_user_func_array(Array, Array)
      #3 /usr/share/php/openmediavault/rpc/rpc.inc(84): OMV\Rpc\ServiceAbstract->callMethod('login', Array, Array)
      #4 /usr/share/php/openmediavault/rpc/proxy/json.inc(95): OMV\Rpc\Rpc::call('Session', 'login', Array, Array, 3)
      #5 /var/www/openmediavault/rpc.php(45): OMV\Rpc\Proxy\Json->handle()
      #6 {main}

      Help or clues to go from here would be gratefully accepted.
      Dell Precision 670: 4 XEON CPUs, dedicated system internal hard drive,one internal storage drive, and two external USB harddrives
    • Ktrammel wrote:

      Hi,
      Still playing around with 3.0, but haven't gotten it installed/running properly. I keep getting "MDADM.CONF defines no arrays" and when I try to log on to the GUI I get Error Message and here's the details:
      Error #0:exception 'OMV\Rpc\Exception' with message 'Failed to connect to socket: No such file or directory' in /usr/share/php/openmediavault/rpc/rpc.inc:138
      Stack trace:
      #0 /var/www/openmediavault/rpc/session.inc(56): OMV\Rpc\Rpc::call('UserMgmt', 'authUser', Array, Array, 2, true)#1 [internal function]: OMVRpcServiceSession->login(Array, Array)
      #2 /usr/share/php/openmediavault/rpc/serviceabstract.inc(124): call_user_func_array(Array, Array)
      #3 /usr/share/php/openmediavault/rpc/rpc.inc(84): OMV\Rpc\ServiceAbstract->callMethod('login', Array, Array)
      #4 /usr/share/php/openmediavault/rpc/proxy/json.inc(95): OMV\Rpc\Rpc::call('Session', 'login', Array, Array, 3)
      #5 /var/www/openmediavault/rpc.php(45): OMV\Rpc\Proxy\Json->handle()
      #6 {main}

      Help or clues to go from here would be gratefully accepted.
      I have the exact same issues.
    • Thank you Ryecoaaron. Before i saw your response, I decided to burn a 3.0 beta ISO and do a fresh install (note, I had upgraded from 2 previously). On boot, I got mdadm messages I logged into GUI and set up new OMV which seems to be working. I ran your instructions above via SSH,

      Source Code

      1. mdadm --examine --scan >> /etc//mdadm.conf
      2. mdadmupdate-initramfs -u

      I get (BTW I've never set up any RAID):
      W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
      W: mdadm: no arrays defined in configuration file.


      Source Code

      1. cat /etc/mdadm/mdadm.conf
      Yields:

      # mdadm.conf
      #
      # Please refer to mdadm.conf(5) for information about this file.
      #
      # by default, scan all partitions (/proc/partitions) for MD superblocks.
      # alternatively, specify devices to scan, using wildcards if desired.
      # Note, if no DEVICE line is present, then "DEVICE partitions" is assumed.
      # To avoid the auto-assembly of RAID devices a pattern that CAN'T match is
      # used if no RAID devices are configured.
      DEVICE partitions
      # auto-create devices with Debian standard permissions
      CREATE owner=root group=disk mode=0660 auto=yes
      # automatically tag new arrays as belonging to the local system
      HOMEHOST <system>
      # definitions of existing MD arrays


      I rebooted the system and see message (via journalclt -b):

      mdadm-raid[221]: Assembling MD arrays...done (no arrays found in config file or automatically).

      Should I update Grub too?
      Dell Precision 670: 4 XEON CPUs, dedicated system internal hard drive,one internal storage drive, and two external USB harddrives
    • Doesn't seem like you have an assembled array?? What is the output of: cat /proc/mdstat
      omv 4.1.12 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.11
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • Ktrammel wrote:

      I've never set up RAID on this machine.
      This is important information. Of course mdadm.conf will define no arrays if you don't have any.

      What is the output of: dpkg -l | grep openm
      omv 4.1.12 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.11
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • That's kinda what I thought, but I'm not really sure why its thinks it should.


      dpkg -l | grep openm

      ii openmediavault 3.0.51 all Open network attached storage solution
      ii openmediavault-clamav 3.2.6 all OpenMediaVault ClamAV plugin
      ii openmediavault-keyring 1.0 all GnuPG archive keys of the OpenMediaVault archive
      Dell Precision 670: 4 XEON CPUs, dedicated system internal hard drive,one internal storage drive, and two external USB harddrives