Hello,
TL;DR; Raid0 fails after reboot. Snapraid fails to install even after omv update
Code
The following packages have unmet dependencies:
openmediavault-snapraid : Depends: snapraid (>= 9.1) but it is not installable
E: Unable to correct problems, you have held broken packages.
Goal: To make a RAID0 NAS and seedbox out of 3 usb sticks after HD died on trusty RPi3
Fails:
- Array persistence after reboot. most probably PEBKAC. Please see RAID0 creation commands below
- Snapraid plugin installation
Code
udevadm control --stop-exec-queue
mdadm --create --verbose /dev/md0 --run --level=stripe --raid-devices=3 /dev/sda /dev/sdb /dev/sdc
mdadm --stop /dev/md0
mdadm --detail --scan >> /etc/mdadm/mdadm.conf #
mdadm -A /dev/md0 /dev/sda /dev/sdb /dev/sdc --homehost=kodukoer --update=homehost
udevadm control --start-exec-queue
I have added the UUID of the array to fstab, but not quite sure either if it's correct. Just in case will bring it up here as well
Code
UUID=77bd567a-a893a0b4-03eac542-27926cc9 /media/kuut ext4 rw,auto,nofail,acl,user_xattr,noexec,async,suid,dev,jqfmt=vfsv0,acl 0 2
Any feedback (pointers, hints, flame etc) is greatly appreciated!
Edit: added mdadm conf line