Problem with vt6421 sata controller and hdds

Hi guys.

I’m totally newbie in Linux, and this is my first test with OMV.

I have an old amd xp2000+ with 1,5RAM and 5 HDD (3 IDE and 2 SATA).

As my old motherboard doesn’t support SATA, I have a CONCEPTRONICS sata controller installed on it (chipset VIA VT6421) connected to my 2 sata HDD.

Actually, only 3 of my 5 HDD are visible on openmediavault, these are the IDE old HDD, but I can’t find the 2 SATA HDD.

What can be the problem?

Can anyone help me?

Thanks.

Hi.

Thanks for your answer.

The setup works well with windows xp.

I've tried with the command lspci, and I've got the message: bad command (or something like this). It seems that OMV fedaykin doesn't support this command...

This afternoon, i'll try to execute lsmod | grep via. We'll see...

Ok.

I'll try later, when I come back home.

Thanks.

Hi.

This is what I get:
root@BigtormNas:~# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:08.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE RAID Controller ( rev 50)
00:09.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
00:09.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Et hernet (rev 10)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/ C PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64 /Model 64 Pro] (rev 15)

root@BigtormNas:~# lsmod | grep via
i2c_viapro 4387 0
i2c_core 12739 5 nouveau,drm_kms_helper,i2c_viapro,drm,i2c_algo_bit
via_ircc 13188 0
irda 71690 1 via_ircc
sata_via 5596 0
pata_via 5721 4
libata 117427 3 ata_generic,sata_via,pata_via
root@BigtormNas:~#

This is what I get:

root@BigtormNas:~# fdisk -l

Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0007e53a

Device Boot Start End Blocks Id System
/dev/sda1 * 1 4663 37447680 83 Linux
/dev/sda2 4663 4866 1632257 5 Extended
/dev/sda5 4663 4866 1632256 82 Linux swap / Solaris

WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn 't support GPT. Use GNU Parted.

Disk /dev/sdc: 160.0 GB, 160041885696 bytes
256 heads, 63 sectors/track, 19381 cylinders
Units = cylinders of 16128 * 512 = 8257536 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/sdc1 1 19382 156290903+ ee GPT

WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn 't support GPT. Use GNU Parted.

Disk /dev/sdb: 60.0 GB, 60022480896 bytes
256 heads, 63 sectors/track, 7268 cylinders
Units = cylinders of 16128 * 512 = 8257536 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/sdb1 1 7269 58615703+ ee GPT
Note: sector size is 4096 (not 512)

Disk /dev/sdd: 3000.6 GB, 3000592977920 bytes
255 heads, 63 sectors/track, 45600 cylinders
Units = cylinders of 16065 * 4096 = 65802240 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x383f8f59

Device Boot Start End Blocks Id System
/dev/sdd1 1 45601 2930253824 7 HPFS/NTFS

Hi.

The 3Tb HDD is an USB disk I've just plugged in.

The two sata drives don't work even when the USB drive is not plugged.

I don't know how to do this...

Can you help me?