greetings follow members of omv
i have installed omv on odroid jessie, followed these instructions: INSTRUCTIONS
everything is up and working fine
i have a little problem with slow read rates(~30MB) on SMB but write rates (~60MB) are fine
i have: 1x Seagate 1TB EXT4 USB 3.0 and 1x WD 1TB NTFS USB 3.0
both connected to 4-Port USB 3.0 bus powered with 5V/2.5A power adaptor
odroid and my PC(win10) are connected to Gigabit network
can you guys help me sort out this problem
here are my stats of both HDDS
SEAGATE (EXT4)
————————-
SMB Rates
Write: ~60MB
Read: ~33MB
Code
#hdparm -Tt /dev/sda1
/dev/sda1:
Timing cached reads: 1416 MB in 2.00 seconds = 708.82 MB/sec
Timing buffered disk reads: 292 MB in 3.01 seconds = 97.02 MB/sec
#cd /media/sda1
#dd if=/dev/zero of=tempfile bs=1M count=1024 conv=fdatasync,notrunc
1073741824 bytes (1.1 GB) copied, 12.8484 s, 83.6 MB/s
#echo 3 > /proc/sys/vm/drop_caches && dd if=tempfile of=/dev/null bs=1M count=1024
1073741824 bytes (1.1 GB) copied, 11.4987 s, 93.4 MB/s
Alles anzeigen
WD (NTFS)
——————
SMB Rates:
W ~63MB
R ~32MB
Code
#hdparm -Tt /dev/sdb1
/dev/sdb1:
Timing cached reads: 1354 MB in 2.00 seconds = 677.23 MB/sec
Timing buffered disk reads: 292 MB in 3.01 seconds = 97.06 MB/sec
#cd /media/sdb1
#dd if=/dev/zero of=tempfile bs=1M count=1024 conv=fdatasync,notrunc
1073741824 bytes (1.1 GB) copied, 19.5976 s, 54.8 MB/s
#echo 3 > /proc/sys/vm/drop_caches && dd if=tempfile of=/dev/null bs=1M count=1024
1073741824 bytes (1.1 GB) copied, 10.7175 s, 100 MB/s
Alles anzeigen