[OMV ODROID-XU4 Cloudshell LCD ]

    • OMV 2.x
    • Resolved
    • [OMV ODROID-XU4 Cloudshell LCD ]

      Hi everybody !

      I just update older post to configure properly LCD screen on odroid-xu4 to show info from cloudshell script.

      [GNU General Public License (GPLv2)]



      First of all we need to configure LCD screen and add next lines...


      Module configuration (link)

      • $ echo "options fbtft_device name=hktft9340 busnum=1 rotate=270" > /etc/modprobe.d/odroid-cloudshell.conf

      • $ echo "spi_s3c64xx" >> /etc/modules

      • $ echo "fbtft_device" >> /etc/modules

      Next steps...

      1. $ sudo apt-get update

      2. $ sudo apt-get install curl sysstat
      I did work with this version of cloudshell script:
      forum.openmediavault.org/index…11a04b85b05ec8cbd0cd54c65 (You can download from here)

      Now we need to install .deb package: (wget command download the file on your current path, I recommended you create some folder to save "installation files and instrucctions")
      1. $ wget raw.githubusercontent.com/mdrj…-lcd_20160913-3_armhf.deb
      2. $ sudo dpkg -i cloudshell-lcd_20150731-1_armhf.deb
      3. $ sudo apt-get -f install
      Before that you probably get some error... Don't worry
      The installation package put on /bin directory a script file, yes.. cloudshell.


      I attached a modified file that contains some "extra" information

      I had a problem with CPU usage but you will see in a script file some lines with cpu usage options... you can try it.

      This is part of /etc/inittab file, you need to view, compare and add lines to get cloudshell on TTY1
      The initttab file contains a "loop" to show information on lcd screen, if is not modified, the program mingetty will be running instead of cloudshell

      forum.openmediavault.org/index…11a04b85b05ec8cbd0cd54c65
      # YOU NEED TO CHANGE LINE 54 FOR 55

      Shell-Script: INITTAB

      1. 54 # 1:2345:respawn:/sbin/mingetty --autologin root tty1
      2. 55 1:2345:respawn:/bin/cloudshell --autologin root tty1
      3. 56 2:23:respawn:/sbin/getty 38400 tty2
      4. 57 3:23:respawn:/sbin/getty 38400 tty3
      5. 58 4:23:respawn:/sbin/getty 38400 tty4
      6. 59 5:23:respawn:/sbin/getty 38400 tty5
      7. 60 6:23:respawn:/sbin/getty 38400 tty6

      The other one contains two files, "cloudshell_lcd.original" and "cloudshell"
      "cloudshell" is the most important and you should copy on /bin to get information on lcd screen...
      forum.openmediavault.org/index…11a04b85b05ec8cbd0cd54c65



      NOTE: Im afraid of CPU usage are not real so...in this point I appreciate any suggestion to show real CPU usage, in that point only shows "sys cpu usage"...

      Hope that I have been able to help resolve this problem
      Files