Broken packages on 3.0.59 -> 3.0.60

    • OMV 3.x
    • Update

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Broken packages on 3.0.59 -> 3.0.60

      Try to update these packages, but it said the system already had it.
      Update & clean the packages, but it's still there in the pending updates in the Update Management.

      Source Code

      1. >>> *************** Error ***************
      2. Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; export DEBIAN_FRONTEND=noninteractive; apt-get --yes --force-yes --fix-missing --auto-remove --allow-unauthenticated --show-upgraded --option DPkg::Options::="--force-confold" install firmware-adi firmware-amd-graphics firmware-bnx2 firmware-bnx2x firmware-ipw2x00 firmware-iwlwifi firmware-libertas firmware-linux firmware-linux-nonfree firmware-misc-nonfree firmware-myricom firmware-netxen firmware-qlogic firmware-ralink firmware-realtek firmware-samsung firmware-ti-connectivity intel-microcode 2>&1': Reading package lists...
      3. Building dependency tree...
      4. Reading state information...
      5. firmware-adi is already the newest version.
      6. firmware-ralink is already the newest version.
      7. Some packages could not be installed. This may mean that you have
      8. requested an impossible situation or if you are using the unstable
      9. distribution that some required packages have not yet been created
      10. or been moved out of Incoming.
      11. The following information may help to resolve the situation:
      12. The following packages have unmet dependencies:
      13. firmware-misc-nonfree : Breaks: firmware-adi
      14. Breaks: firmware-ralink
      15. E: Unable to correct problems, you have held broken packages.
      16. <<< *************************************
      17. >>> *************** Error ***************
      18. Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; export DEBIAN_FRONTEND=noninteractive; apt-get --yes --force-yes --fix-missing --auto-remove --allow-unauthenticated --show-upgraded --option DPkg::Options::="--force-confold" install firmware-adi firmware-amd-graphics firmware-bnx2 firmware-bnx2x firmware-ipw2x00 firmware-iwlwifi firmware-libertas firmware-linux firmware-linux-nonfree firmware-misc-nonfree firmware-myricom firmware-netxen firmware-qlogic firmware-ralink firmware-realtek firmware-samsung firmware-ti-connectivity intel-microcode 2>&1': Reading package lists...
      19. Building dependency tree...
      20. Reading state information...
      21. firmware-adi is already the newest version.
      22. firmware-ralink is already the newest version.
      23. Some packages could not be installed. This may mean that you have
      24. requested an impossible situation or if you are using the unstable
      25. distribution that some required packages have not yet been created
      26. or been moved out of Incoming.
      27. The following information may help to resolve the situation:
      28. The following packages have unmet dependencies:
      29. firmware-misc-nonfree : Breaks: firmware-adi
      30. Breaks: firmware-ralink
      31. E: Unable to correct problems, you have held broken packages.
      32. <<< *************************************
      33. >>> *************** Error ***************
      34. Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; export DEBIAN_FRONTEND=noninteractive; apt-get --yes --force-yes --fix-missing --auto-remove --allow-unauthenticated --show-upgraded --option DPkg::Options::="--force-confold" install firmware-adi firmware-amd-graphics firmware-bnx2 firmware-bnx2x firmware-ipw2x00 firmware-iwlwifi firmware-libertas firmware-linux firmware-linux-nonfree firmware-misc-nonfree firmware-myricom firmware-netxen firmware-qlogic firmware-ralink firmware-realtek firmware-samsung firmware-ti-connectivity intel-microcode 2>&1': Reading package lists...
      35. Building dependency tree...
      36. Reading state information...
      Display All
      OMV v4.0
      Asus Z97-A/3.1; i3-4370
      32GB RAM Corsair Vengeance Pro
      4x3TB RAID10
    • i don't know enough to know if i am having the same problem but apt-get update

      Source Code

      1. apt-get update
      2. Ign file: InRelease
      3. Err http://packages.openmediavault.org erasmus InRelease
      4. Ign file: Release.gpg
      5. Ign file: Release
      6. Err http://security.debian.org jessie/updates InRelease
      7. Err http://packages.openmediavault.org erasmus Release.gpg
      8. Temporary failure resolving 'packages.openmediavault.org'
      9. Err http://security.debian.org jessie/updates Release.gpg
      10. Temporary failure resolving 'security.debian.org'
      11. Err http://ftp.us.debian.org jessie InRelease
      12. Err http://ftp.us.debian.org jessie-updates InRelease
      13. Err http://ftp.us.debian.org jessie Release.gpg
      14. Temporary failure resolving 'ftp.us.debian.org'
      15. Err http://ftp.us.debian.org jessie-updates Release.gpg
      16. Temporary failure resolving 'ftp.us.debian.org'
      17. Ign file: Translation-en_US
      18. Ign file: Translation-en
      19. Reading package lists... Done
      20. W: Failed to fetch http://ftp.us.debian.org/debian/dists/jessie/InRelease
      21. W: Failed to fetch http://security.debian.org/dists/jessie/updates/InRelease
      22. W: Failed to fetch http://ftp.us.debian.org/debian/dists/jessie-updates/InRelease
      23. W: Failed to fetch http://packages.openmediavault.org/public/dists/erasmus/InRelease
      24. W: Failed to fetch http://packages.openmediavault.org/public/dists/erasmus/Release.gpg Temporary failure resolving 'packages.openmediavault.org'
      25. W: Failed to fetch http://security.debian.org/dists/jessie/updates/Release.gpg Temporary failure resolving 'security.debian.org'
      26. W: Failed to fetch http://ftp.us.debian.org/debian/dists/jessie/Release.gpg Temporary failure resolving 'ftp.us.debian.org'
      27. W: Failed to fetch http://ftp.us.debian.org/debian/dists/jessie-updates/Release.gpg Temporary failure resolving 'ftp.us.debian.org'
      28. W: Some index files failed to download. They have been ignored, or old ones used instead.
      Display All
      Just wanted to add DLNA so I can play movies on my PS3
      Xpocalypse NOW I love smell of OS in the morning, Smells like 01110110011010010110001101110100011011110111001001111001
      Linux user since January 14, 2014
      [IMG:http://www.mrbills.net/pics/ralph.jpg]I can look up things on the internet!
    • Works fine for me as well.


      Okay EDIT: Just pressed refresh again and now I have over 15 firmware updates. No clue if its good or bad but I'm a bit surprised.
      Images
      • update.png

        157.56 kB, 1,920×874, viewed 565 times
      OMV 4 - Ryzen 7 1700 (8 Cores / 16 Threads 65W TDP) - 32 GB DDR4 ECC
      128 GB OS SSD - 256 GB Plex SSD - 32 TB RAIDZ2 (6x8TB HGST NAS)
    • tinh_x7 wrote:

      Yes, I did 4 times.
      Once is enough :) What is the output of: apt-get dist-upgrade

      xprefugee wrote:

      i don't know enough to know if i am having the same problem but apt-get update
      This is a dns/network/internet connection issue.

      Dropkick Murphy wrote:

      Update via GUI worked like a charme here, just minutes ago...
      Mine too on five systems.
      omv 4.1.8.2 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.8
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please read this before posting a question.
      Please don't PM for support... Too many PMs!
    • Skaronator wrote:

      Just pressed refresh again and now I have over 15 firmware updates. No clue if its good or bad but I'm a bit surprised.
      This is ok. Your system had the regular firmware packages installed. Now, it wants to install the backports (newer) packages. I use the backports packages on all of my systems.
      omv 4.1.8.2 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.8
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please read this before posting a question.
      Please don't PM for support... Too many PMs!
    • Skaronator wrote:

      I was already using the 4.8 Backport Kernel or is that a different thing?
      Kind of the same thing. They are all packages in the backports repo.
      omv 4.1.8.2 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.8
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please read this before posting a question.
      Please don't PM for support... Too many PMs!
    • Thanks.
      It worked.
      But why do I need to run this distro-upgrade to get it fixed though?

      apt-get dist-upgrade

      Source Code

      1. Reading package lists... Done
      2. Building dependency tree
      3. Reading state information... Done
      4. Calculating upgrade... Done
      5. The following packages will be REMOVED:
      6. firmware-adi firmware-ralink
      7. The following NEW packages will be installed:
      8. firmware-amd-graphics firmware-misc-nonfree
      9. The following packages will be upgraded:
      10. firmware-bnx2 firmware-bnx2x firmware-ipw2x00 firmware-iwlwifi firmware-libertas firmware-linux firmware-linux-nonfree firmware-myricom firmware-netxen
      11. firmware-qlogic firmware-realtek firmware-samsung firmware-ti-connectivity intel-microcode
      12. 14 upgraded, 2 newly installed, 2 to remove and 0 not upgraded.
      13. Need to get 22.3 MB of archives.
      14. After this operation, 60.3 MB of additional disk space will be used.
      15. Do you want to continue? [Y/n] y
      16. Get:1 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-ipw2x00 all 20160824-1~bpo8+1 [248 kB]
      17. Get:2 http://httpredir.debian.org/debian/ jessie-backports/non-free intel-microcode amd64 3.20161104.1~bpo8+1 [696 kB]
      18. Get:3 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-linux-nonfree all 20160824-1~bpo8+1 [13.2 kB]
      19. Get:4 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-linux all 20160824-1~bpo8+1 [13.5 kB]
      20. Get:5 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-misc-nonfree all 20160824-1~bpo8+1 [2,170 kB]
      21. Get:6 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-amd-graphics all 20160824-1~bpo8+1 [1,506 kB]
      22. Get:7 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-bnx2 all 20160824-1~bpo8+1 [98.2 kB]
      23. Get:8 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-bnx2x all 20160824-1~bpo8+1 [2,815 kB]
      24. Get:9 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-iwlwifi all 20160824-1~bpo8+1 [5,879 kB]
      25. Get:10 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-libertas all 20160824-1~bpo8+1 [2,558 kB]
      26. Get:11 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-myricom all 20160824-1~bpo8+1 [268 kB]
      27. Get:12 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-ti-connectivity all 20160824-1~bpo8+1 [1,015 kB]
      28. Get:13 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-netxen all 20160824-1~bpo8+1 [1,238 kB]
      29. Get:14 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-qlogic all 20160824-1~bpo8+1 [2,913 kB]
      30. Get:15 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-realtek all 20160824-1~bpo8+1 [307 kB]
      31. Get:16 http://httpredir.debian.org/debian/ jessie-backports/non-free firmware-samsung all 20160824-1~bpo8+1 [514 kB]
      32. Fetched 22.3 MB in 6s (3,618 kB/s)
      33. Preconfiguring packages ...
      34. (Reading database ... 83335 files and directories currently installed.)
      35. Removing firmware-adi (0.43) ...
      36. Removing firmware-ralink (0.43) ...
      37. (Reading database ... 83312 files and directories currently installed.)
      38. Preparing to unpack .../firmware-ipw2x00_20160824-1~bpo8+1_all.deb ...
      39. Unpacking firmware-ipw2x00 (20160824-1~bpo8+1) over (0.43) ...
      40. Preparing to unpack .../intel-microcode_3.20161104.1~bpo8+1_amd64.deb ...
      41. Unpacking intel-microcode (3.20161104.1~bpo8+1) over (3.20160714.1~deb8u1) ...
      42. Preparing to unpack .../firmware-linux-nonfree_20160824-1~bpo8+1_all.deb ...
      43. Unpacking firmware-linux-nonfree (20160824-1~bpo8+1) over (0.43) ...
      44. Preparing to unpack .../firmware-linux_20160824-1~bpo8+1_all.deb ...
      45. Unpacking firmware-linux (20160824-1~bpo8+1) over (0.43) ...
      46. Selecting previously unselected package firmware-misc-nonfree.
      47. Preparing to unpack .../firmware-misc-nonfree_20160824-1~bpo8+1_all.deb ...
      48. Unpacking firmware-misc-nonfree (20160824-1~bpo8+1) ...
      49. Selecting previously unselected package firmware-amd-graphics.
      50. Preparing to unpack .../firmware-amd-graphics_20160824-1~bpo8+1_all.deb ...
      51. Unpacking firmware-amd-graphics (20160824-1~bpo8+1) ...
      52. Preparing to unpack .../firmware-bnx2_20160824-1~bpo8+1_all.deb ...
      53. Unpacking firmware-bnx2 (20160824-1~bpo8+1) over (0.43) ...
      54. Preparing to unpack .../firmware-bnx2x_20160824-1~bpo8+1_all.deb ...
      55. Unpacking firmware-bnx2x (20160824-1~bpo8+1) over (0.43) ...
      56. Preparing to unpack .../firmware-iwlwifi_20160824-1~bpo8+1_all.deb ...
      57. Unpacking firmware-iwlwifi (20160824-1~bpo8+1) over (0.43) ...
      58. Preparing to unpack .../firmware-libertas_20160824-1~bpo8+1_all.deb ...
      59. Unpacking firmware-libertas (20160824-1~bpo8+1) over (0.43) ...
      60. Preparing to unpack .../firmware-myricom_20160824-1~bpo8+1_all.deb ...
      61. Unpacking firmware-myricom (20160824-1~bpo8+1) over (0.43) ...
      62. Preparing to unpack .../firmware-netxen_20160824-1~bpo8+1_all.deb ...
      63. Unpacking firmware-netxen (20160824-1~bpo8+1) over (0.43) ...
      64. Preparing to unpack .../firmware-qlogic_20160824-1~bpo8+1_all.deb ...
      65. Unpacking firmware-qlogic (20160824-1~bpo8+1) over (0.43) ...
      66. Preparing to unpack .../firmware-realtek_20160824-1~bpo8+1_all.deb ...
      67. Unpacking firmware-realtek (20160824-1~bpo8+1) over (0.43) ...
      68. Preparing to unpack .../firmware-samsung_20160824-1~bpo8+1_all.deb ...
      69. Unpacking firmware-samsung (20160824-1~bpo8+1) over (0.43) ...
      70. Preparing to unpack .../firmware-ti-connectivity_20160824-1~bpo8+1_all.deb ...
      71. Unpacking firmware-ti-connectivity (20160824-1~bpo8+1) over (0.43) ...
      72. Setting up firmware-ipw2x00 (20160824-1~bpo8+1) ...
      73. Setting up intel-microcode (3.20161104.1~bpo8+1) ...
      74. update-initramfs: deferring update (trigger activated)
      75. intel-microcode: microcode will be updated at next boot
      76. Setting up firmware-misc-nonfree (20160824-1~bpo8+1) ...
      77. update-initramfs: deferring update (trigger activated)
      78. Setting up firmware-amd-graphics (20160824-1~bpo8+1) ...
      79. Setting up firmware-linux-nonfree (20160824-1~bpo8+1) ...
      80. Setting up firmware-linux (20160824-1~bpo8+1) ...
      81. Setting up firmware-bnx2 (20160824-1~bpo8+1) ...
      82. update-initramfs: deferring update (trigger activated)
      83. Setting up firmware-bnx2x (20160824-1~bpo8+1) ...
      84. update-initramfs: deferring update (trigger activated)
      85. Setting up firmware-iwlwifi (20160824-1~bpo8+1) ...
      86. Setting up firmware-libertas (20160824-1~bpo8+1) ...
      87. Setting up firmware-myricom (20160824-1~bpo8+1) ...
      88. update-initramfs: deferring update (trigger activated)
      89. Setting up firmware-netxen (20160824-1~bpo8+1) ...
      90. update-initramfs: deferring update (trigger activated)
      91. Setting up firmware-qlogic (20160824-1~bpo8+1) ...
      92. update-initramfs: deferring update (trigger activated)
      93. Setting up firmware-realtek (20160824-1~bpo8+1) ...
      94. update-initramfs: deferring update (trigger activated)
      95. Setting up firmware-samsung (20160824-1~bpo8+1) ...
      96. Setting up firmware-ti-connectivity (20160824-1~bpo8+1) ...
      97. Processing triggers for initramfs-tools (0.120+deb8u2) ...
      98. update-initramfs: Generating /boot/initrd.img-4.8.0-0.bpo.2-amd64
      Display All
      OMV v4.0
      Asus Z97-A/3.1; i3-4370
      32GB RAM Corsair Vengeance Pro
      4x3TB RAID10
    • tinh_x7 wrote:

      why do I need to run this distro-upgrade to get it fixed though?
      I just tried a fresh VM again. The reason it has problems is because there is an update for the firmware-adi and firmware-ralink packages. If you select all the packages, you are telling the system to upgrade those two packages even though they need to be removed. If you deselect just those two packages, the upgrade works fine from the web interface. I don't think I have ever seen this issue before.
      omv 4.1.8.2 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.8
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please read this before posting a question.
      Please don't PM for support... Too many PMs!
    • apt-get dist-upgrade gave me

      Source Code

      1. apt-get dist-upgrade
      2. Reading package lists... Done
      3. Building dependency tree
      4. Reading state information... Done
      5. You might want to run 'apt-get -f install' to correct these.
      6. The following packages have unmet dependencies:
      7. linux-image-extra-4.4.0-57-generic : Depends: linux-image-4.4.0-57-generic but it is not installed
      8. linux-image-generic : Depends: linux-image-4.4.0-57-generic but it is not installed
      9. E: Unmet dependencies. Try using -f.
      So I did what it said
      apt-get -f install

      then it suggested
      apt autoremove
      so I did that via ssh
      Xpocalypse NOW I love smell of OS in the morning, Smells like 01110110011010010110001101110100011011110111001001111001
      Linux user since January 14, 2014
      [IMG:http://www.mrbills.net/pics/ralph.jpg]I can look up things on the internet!
    • jtodaro wrote:

      And, all it does it sit there. never completes.
      someone marked this thread solved so you should probably start your own thread. That is what I did but my problem seems different than yours
      Xpocalypse NOW I love smell of OS in the morning, Smells like 01110110011010010110001101110100011011110111001001111001
      Linux user since January 14, 2014
      [IMG:http://www.mrbills.net/pics/ralph.jpg]I can look up things on the internet!