I have a small slow PC I'm using as a backup server, running Mint, with a couple of EXT4 already half-full 3T drives, from which I rsync from one to the other for security, rather than use explicit RAID. Reading what OMV includes, I figure it may be quicker for me to switch to OMV than figure out how to get the other goodies working under Mint. I would intend to keep the discs as JBOD with rsync. Once OMV is installed, will I need to reformat and re copy the data to the drives, or will OMV be happy with pre-formatted, half full drives? If the worst comes to the worst, I can fit one drive, format it, copy the data from the other, but that seems a bit of a waste of time if OMV can get on with half-full drives. All the guides I've read ignore this aspect, and assume you'll be starting with new drives.
you can use EXT4 already half-full 3T drives , and no need to reformat, only need to mount and use it.
your aproach is usefull for use in the mergerfs pluging.OMV 3.0.96 x64 on a HP T510, 16GB CF as Boot Disk & 32GB SSD 2,5" disk for Data, 4 GB RAM, CPU VIA EDEN X2 U4200 is x64 at 1GHz
Post: HPT510 SlimNAS ; HOWTO Install Pi-Hole ; HOWTO install MLDonkey ; HOHTO Install ZFS-Plugin ; OMV_OldGUI ; ShellinaBOX ;
Dockers: MLDonkey ; PiHole ;
Omv will be fine with non empty drives as long as it's data drives that are not empty. As omv is based on standard Debian it will work.
Unplug the data drives during initial install so you do not destroy data by mistake. Once omv is installed, shut it down and connect the data drives, boot it up , once up, go to file system tab.
OMV either will pickup and mount drives on boot or you will be able to mount them on that tab, word of caution do not create new file system on your data drives they should be already present and shown to have a file system , just might need to mount them.
Sent from my SM-N910T using Tapatalkomv 3.0.56 erasmus | 64 bit | 4.7 backport kernel
SM-SC846(24 bay)| H8DME-2 |2x AMD Opteron Hex Core 2431 @ 2.4Ghz |49GB RAM
PSU: Silencer 760 Watt ATX Power Supply
IPMI |3xSAT2-MV8 PCI-X |4 NIC : 2x Realteck + 1 Intel Pro Dual port PCI-e card
OS on 2×120 SSD in RAID-1 |
DATA: 3x3T| 4x2T | 2x1T
Thanks both. I hoped and expected that was the answer, nice to have it confirmed.