Problems after OSCam installation

    • OMV 2.x

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Problems after OSCam installation

      hello,
      I'm very sorry for my english.
      I am a first time poster.
      Congratulation for this system, it's very goog.
      I'm new to OMV and Linux in general. So I have made an installation with some tutorials.
      It was ok and the NAS was 100% fonctionnaly with FTP, SMB, NFS and Bittorrent.
      The version is 2.2.13 (stone burner), CPU Pentium Dual-core E5200.

      Yesterday i have tried to install OSCam manually with putty :

      I used a tuto to install OSCam on debian :

      Source Code

      1. apt-get update
      2. apt-get install build-essential
      3. apt-get install libssl-dev libpcsclite-dev
      4. apt-get install mercurial cvs subversion libncurses-dev
      5. apt-get install cmake
      6. mkdir /var/bin
      7. svn co http://www.streamboard.tv/svn/oscam/trunk oscam
      8. cd oscam
      9. make config (I choose my config)
      10. You have selected the following components:
      11. Add-ons:
      12. WEBIF : on
      13. WEBIF_LIVELOG : on
      14. WEBIF_JQUERY : on
      15. TOUCH : on
      16. WITH_SSL : off
      17. HAVE_DVBAPI : on
      18. READ_SDT_CHARSETS : on
      19. IRDETO_GUESSING : on
      20. CS_ANTICASC : on
      21. WITH_DEBUG : on
      22. MODULE_MONITOR : on
      23. WITH_LB : on
      24. CS_CACHEEX : on
      25. CW_CYCLE_CHECK : on
      26. LCDSUPPORT : off
      27. LEDSUPPORT : off
      28. CLOCKFIX : on
      29. IPV6SUPPORT : off
      30. Protocols:
      31. MODULE_CAMD33 : off
      32. MODULE_CAMD35 : on
      33. MODULE_CAMD35_TCP : on
      34. MODULE_NEWCAMD : on
      35. MODULE_CCCAM : on
      36. MODULE_CCCSHARE : on
      37. MODULE_GBOX : on
      38. MODULE_RADEGAST : on
      39. MODULE_SCAM : on
      40. MODULE_SERIAL : on
      41. MODULE_CONSTCW : on
      42. MODULE_PANDORA : on
      43. MODULE_GHTTP : on
      44. Readers:
      45. READER_NAGRA : on
      46. READER_IRDETO : on
      47. READER_CONAX : on
      48. READER_CRYPTOWORKS : on
      49. READER_SECA : on
      50. READER_VIACCESS : on
      51. READER_VIDEOGUARD : on
      52. READER_DRE : on
      53. READER_TONGFANG : on
      54. READER_BULCRYPT : on
      55. READER_GRIFFIN : on
      56. READER_DGCRYPT : on
      57. Card readers:
      58. CARDREADER_PHOENIX : on
      59. CARDREADER_INTERNAL : on
      60. CARDREADER_SC8IN1 : on
      61. CARDREADER_MP35 : on
      62. CARDREADER_SMARGO : on
      63. CARDREADER_DB2COM : on
      64. CARDREADER_STAPI : on
      65. CARDREADER_STAPI5 : on
      66. CARDREADER_STINGER : on
      67. CARDREADER_DRECAS : on
      68. cmake -DWEBIF=1 -DHAVE_DVBAPI=1
      Display All
      And there is an error :


      Source Code

      1. root@openmediavault:/usr/src/oscam-svn/oscam# cmake -DWEBIF=1 -DHAVE_DVBAPI=1 -- The C compiler identification is GNU 4.7.2
      2. -- Check for working C compiler: /usr/bin/gcc
      3. -- Check for working C compiler: /usr/bin/gcc -- works
      4. -- Detecting C compiler ABI info
      5. -- Detecting C compiler ABI info - done
      6. -- Looking for pthread.h
      7. -- Looking for pthread.h - found
      8. -- pthread found. Adding pthread support
      9. -- Looking for openssl/aes.h
      10. -- Looking for openssl/aes.h - found
      11. -- SSL IS NOT INCLUDED IN THIS COMPILATION
      12. CMake Error at /usr/share/cmake-2.8/Modules/FindOpenSSL.cmake:263 (list):
      13. list GET given empty list
      14. Call Stack (most recent call first):
      15. CMakeLists.txt:239 (find_package)
      16. CMake Error at /usr/share/cmake-2.8/Modules/FindOpenSSL.cmake:264 (list):
      17. list GET given empty list
      18. Call Stack (most recent call first):
      19. CMakeLists.txt:239 (find_package)
      20. CMake Error at /usr/share/cmake-2.8/Modules/FindOpenSSL.cmake:266 (list):
      21. list GET given empty list
      22. Call Stack (most recent call first):
      23. CMakeLists.txt:239 (find_package)
      24. CMake Error at /usr/share/cmake-2.8/Modules/FindOpenSSL.cmake:268 (list):
      25. list GET given empty list
      26. Call Stack (most recent call first):
      27. CMakeLists.txt:239 (find_package)
      28. -- Found OpenSSL: /usr/lib/x86_64-linux-gnu/libssl.so;/usr/lib/x86_64-linux-gnu/ libcrypto.so (found version ".0.0`")
      29. -- openssl found.
      30. -- Looking for time.h
      31. -- Looking for time.h - found
      32. -- librt found (needed by libusb).
      33. -- Looking for libusb-1.0/libusb.h
      34. -- Looking for libusb-1.0/libusb.h - found
      35. -- Looking for libusb-1.0/libusb.h
      36. -- Looking for libusb-1.0/libusb.h - found
      37. -- libusb 1.0 found (libusb-1.0.so) Adding smartreader support
      38. -- Looking for PCSC/wintypes.h
      39. -- Looking for PCSC/wintypes.h - found
      40. -- PCSC headers found (/usr/include/PCSC). Adding PCSC support
      41. HOSTCC webif/pages_gen
      42. GEN webif/pages.c
      43. GEN Compressed 432712 template bytes into 176941 bytes. 255771 saved bytes ( 59.11%).
      44. -- The CXX compiler identification is GNU 4.7.2
      45. -- Check for working CXX compiler: /usr/bin/c++
      46. -- Check for working CXX compiler: /usr/bin/c++ -- works
      47. -- Detecting CXX compiler ABI info
      48. -- Detecting CXX compiler ABI info - done
      49. -- Utils: operating system: Linux
      50. -- Utils: target system: x86_64-linux-gnu
      51. -- utils use system libusb functions
      52. --
      53. --
      54. -- operating system: Linux
      55. -- target system: x86_64-linux-gnu
      56. -- revision: 11350
      57. -- use system libcrypto functions
      58. -- use system pcsc functions
      59. -- use system pthread functions
      60. -- use system libusb functions
      61. --
      62. -- Configuring incomplete, errors occurred!
      Display All
      So now I have 2 problems : How can I install OSCam without errors ?

      And second problem, OMV Shuts Down Randomly When Not In Use.
      How can I repair OMV ?

      Very, very sorry for my english....
      I hope somebody can help me.

      Thank you very much for your patience !