Armbian keeps rebooting after kernel update

    • Resolved
    • OMV 3.x

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Armbian keeps rebooting after kernel update

      After the last kernel update Bananian Armbian with OMV 3 keeps rebooting. After the first screen is displayed, there is ~1 min delay. Then "rebooting" message is displayed and everything starts all over again. Screenshots attached.

      [IMG:https://s24.postimg.org/v1o33nlz5/Full_Size_Render.jpg]

      [IMG:https://s24.postimg.org/ait6yl81t/Full_Size_Render_1.jpg]
      ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 4.9.7-sunxi // Banana Pi // OMV 3.0.62
    • Hi,

      from Here


      Common features
      [*]Debian Wheezy, Jessie or Ubuntu Trusty, Xenial based. Compiled from scratch,
      [*]Install images are reduced to actual data size with small reserve,
      [*]Root password is 1234. You will be prompted to change this password and to create a normal user at first login.
      [*]First boot takes longer (up to few minutes) than usual (20s) because it updates package list, regenerates SSH keys and expand partition to fit your SD card. It might reboot one time automatically.
      [*]Ready to compile external modules
      [*]Ethernet adapter with DHCP and SSH server ready on default port (22)
      [*]Wireless adapter with DHCP ready if present but disabled (/etc/network/interfaces, WPA2: normal connect or AP mode)
    • I performed fresh OMV install from simplenas.com and ran all the updates. Now during the boot I get this message:

      Source Code

      1. Feb 13 23:08:29 localhost systemd[1]: Starting udev Write the /dev/root link rules...
      2. Feb 13 23:08:29 localhost openmediavault-write_dev_root_link_rules[1189]: /lib/udev/openmediavault-write_dev_root_link_rules: 34: .: Can't open /lib/udev/rule_generator.functions
      3. Feb 13 23:08:29 localhost systemd[1]: Starting LSB: Set preliminary keymap...
      4. Feb 13 23:08:29 localhost systemd[1]: Starting LSB: MD array assembly...
      5. Feb 13 23:08:29 localhost systemd[1]: Starting LSB: Tune IDE hard disks...
      6. Feb 13 23:08:29 localhost systemd[1]: openmediavault-udev-write-dev-rule-link-rules.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
      7. Feb 13 23:08:29 localhost systemd[1]: Failed to start udev Write the /dev/root link rules.
      8. Feb 13 23:08:29 localhost systemd[1]: openmediavault-udev-write-dev-rule-link-rules.service: Unit entered failed state.
      9. Feb 13 23:08:29 localhost systemd[1]: openmediavault-udev-write-dev-rule-link-rules.service: Failed with result 'exit-code'.
      Should I be worried?

      Sorry for a newbie questions, and thanks for all your time!
      ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 4.9.7-sunxi // Banana Pi // OMV 3.0.62
    • OK ... Armbian is not my favorite but ....Who cares?

      Install armbian ... (fresh) install

      Source Code

      1. wget https://www.dropbox.com/s/ypz5pcz9xg3ce0a/omv-install-3.x.sh && chmod 777 omv-install-3.x.sh && ./omv-install-3.x.sh

      Postfix: No configuration
      mdadm : none
      ProPTPD: standalone

      dont use SanDisk Micro SD in this case (SONY or Lexar Works Fine )

      Have fun

      Special Thanks to @Wolf2000 for the great Script
    • Hi Master,
      I have one question just before proceeding further with another round of reinstall and config - are you saying the the issue which I am facing is somewhat critical and will/may impact the stability of the system?

      Thanks again
      ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 4.9.7-sunxi // Banana Pi // OMV 3.0.62
    • ok, I did performed the steps as per your message, however I am not able to connect via web browser. I've tried the following, and now I get error 502 Bad Getaway.

      Source Code

      1. root@bananapi:~# nginx -s reload
      2. nginx: [alert] could not open error log file: open() "/var/log/nginx/error.log" failed (2: No such file or directory)
      3. 2017/02/16 21:15:56 [notice] 1374#0: signal process started
      4. 2017/02/16 21:15:56 [error] 1374#0: open() "/run/nginx.pid" failed (2: No such file or directory)
      5. root@bananapi:~# sudo chmod 766 /run
      6. root@bananapi:~# sudo chmod 766 /var/log/nginx/
      7. chmod: cannot access ‘/var/log/nginx/’: No such file or directory
      8. root@bananapi:~# mkdir /var/log/nginx/
      9. root@bananapi:~# sudo chmod 766 /var/log/nginx/
      10. root@bananapi:~# nginx -s reload
      11. nginx: [error] open() "/run/nginx.pid" failed (2: No such file or directory)
      12. root@bananapi:~# nginx -s reload
      13. root@bananapi:~#
      Display All



      The Master wrote:

      OK ... Armbian is not my favorite but ....Who cares?

      Install armbian ... (fresh) install

      Source Code

      1. wget https://www.dropbox.com/s/ypz5pcz9xg3ce0a/omv-install-3.x.sh && chmod 777 omv-install-3.x.sh && ./omv-install-3.x.sh
      Postfix: No configuration
      mdadm : none
      ProPTPD: standalone

      dont use SanDisk Micro SD in this case (SONY or Lexar Works Fine )

      Have fun

      Special Thanks to @Wolf2000 for the great Script
      ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 4.9.7-sunxi // Banana Pi // OMV 3.0.62
    • Source Code

      1. root@bananapi:~# apt-cache policy nginx
      2. nginx:
      3. Installed: 1.6.2-5+deb8u4
      4. Candidate: 1.6.2-5+deb8u4
      5. Version table:
      6. 1.9.10-1~bpo8+4 0
      7. 100 http://httpredir.debian.org/debian/ jessie-backports/main armhf Packages
      8. *** 1.6.2-5+deb8u4 0
      9. 500 http://httpredir.debian.org/debian/ jessie/main armhf Packages
      10. 500 http://security.debian.org/ jessie/updates/main armhf Packages
      11. 100 /var/lib/dpkg/status
      12. root@bananapi:~#
      Display All
      ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 4.9.7-sunxi // Banana Pi // OMV 3.0.62