You guys have same error.
Check your Nginx and pool config again.
OMV, and Nextcloud have their own sockets.
Don't modify the socket if you don't know what you're doing.
You guys have same error.
Check your Nginx and pool config again.
OMV, and Nextcloud have their own sockets.
Don't modify the socket if you don't know what you're doing.
Hi guys. Trying to install NC on my OMV. After following the great guide of 'tinh_x7' I am stuck with the "502 bad gateway" problem. I have checkd, rechecked and checked again all steps, but still can't find any solution, so any help to try a workaround is more than welcome.
Some info, hope it can be usefull to help me:
/dev/sdb linux_raid_member RaspuMediaVault:Superalmacen (in use) cb0bcea9-2673-35e5-e098-9106193943f3
/dev/sda linux_raid_member RaspuMediaVault:Superalmacen (in use) cb0bcea9-2673-35e5-e098-9106193943f3
/dev/sdc linux_raid_member RaspuMediaVault:Superalmacen (in use) cb0bcea9-2673-35e5-e098-9106193943f3
/dev/sdd linux_raid_member RaspuMediaVault:Superalmacen (in use) cb0bcea9-2673-35e5-e098-9106193943f3
/dev/sde1 ext2 (not mounted) 12614073-455f-43c3-a39c-25c2fffef6c8
/dev/sdf1 ext4 / 303c2f57-6b8f-4738-b49a-88fa21f9e160
/dev/sdf3 ext4 Descargas /srv/dev-disk-by-label-Descargas 7ce6ec96-2d5f-43e1-a7ed-ff4c5e76598a
/dev/sdf5 swap <swap> 3ca6f28d-0f8f-40d1-bd4a-cccd89c1f2aa
/dev/md0 ext4 SuperAlmacen /srv/dev-disk-by-id-md-name-RaspuMediaVault-Superalmacen b5361ba7-a4a2-4203-9ed2-13a998514539
Sorry, repost.
I assume you using OMV3.
Ensure the nextcloud ownership is www-data:www-data and using the correct socket.
Use HTTP to see if it works before enforcing HTTPS.
Check out this links: https://help.nextcloud.com/t/502-bad-gateway-nginx/19138
https://forum.owncloud.org/viewtopic.php?t=34491
https://github.com/owncloud/core/issues/14187
I solved my problem by commenting out the following line in nginx config (/etc/nginx/sites-available/zzz-omv-nginx in my case) for Nextcloud:
And the following in /etc/nginx/nginx.conf:
ssl_protocols TLSv1 TLSv1.1 TLSv1.2; # Dropping SSLv3, ref: POODLE
ssl_prefer_server_ciphers on;
Hope it helps somebody else.
Alles anzeigenI assume you using OMV3.
Ensure the nextcloud ownership is www-data:www-data and using the correct socket.
Use HTTP to see if it works before enforcing HTTPS.
Check out this links: https://help.nextcloud.com/t/502-bad-gateway-nginx/19138
https://forum.owncloud.org/viewtopic.php?t=34491
https://github.com/owncloud/core/issues/14187
Thanks! I will check and come later with my answer in case it works.
I solved my problem by commenting out the following line in nginx config (/etc/nginx/sites-available/zzz-omv-nginx in my case) for Nextcloud:
And the following in /etc/nginx/nginx.conf:
Codessl_protocols TLSv1 TLSv1.1 TLSv1.2; # Dropping SSLv3, ref: POODLE ssl_prefer_server_ciphers on;
Hope it helps somebody else.
It looks as an easier solution, at least to try. I will check and post my results. I have never used nginx before, so I really need to learn a lot.
By default, my Nginx codes have HTTPS enabled.
SSL protocols should already included in the Nginx vhost, not sure why you need to add them manually.
by the way... have everyone test the nexcloud configuration with this therd on omv3 and update it to omv4?
Hi guys,
I’m wondering whether I should install NextCloud following the guide or running it in a docker container. A docker container seems safer to me, as in not screwing up my OMV installation.
Are there any advantages installing it following the guide over using a docker?
As long as you follow the installation guide, you should be fine.
Backup your OMV before try it.
I like install it directly rather than configure in Docker.
Hey, iam on step 7)b when i should create admin user and connect to database. When i fill it and send it i got error " ERR_EMPTY_RESPONSE" and then i got redirect loop and i can do everything again. What should i do?
THX
Ensure you create a NextCloud admin account with password in MySQL database before proceed to this step.
i log into mysql and use
CREATE DATABASE name;
GRANT ALL PRIVILEGES ON name.* TO "name"@"localhost"
IDENTIFIED BY "password";
FLUSH PRIVILEGES;
You don't have to do that.
It's easier if you just log into MySQL database GUI from OMV to create NextCloud admin account.
I still getting ERR_TOO_MANY_REDIRECt. Can you write me some steps?
So i need to first create admin user in mysql database. I don't need to create database? How then i fill columns in the database part (mariaDB). Ok i login in to OMV MYSQL and i should add user give him name and password? (in which database).
Btw when i join over phone it works but over web browser getting these errors. When i open it with this adress/login?redirect_url=/apps/files/ i got option username and password but button for sign up not work clicking and nothing do but over phone or client it works only over browser not
MariaDB and MySQL are different.
Double check your NextCloud vhost config.
what should i check and where i can find it? I folowed your guide. I think problem isn't with database if i can join over Clint/Mobile but over browser it's not working i tried differents browsers or anonym mode. I using ngin
Double check the vhost codes in the installation guide.
Turn off HTTPS in the vhost config, and try to see if it work.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!