I did a update last night like I do every few months and everything was fine until I went to my Android TV/Kodi and it said the files no longer existed. So the facts for my setup and problem now are:
v3.0.65 Erasmus
Pentium 4 @3GHz
4.8.0-0.bpo.2-amd64
4GB Ram
~5TB pool with OS on 16GB USB (with flash memory plugin)
Issue Symptoms:
- Nothing obvious in the logs
- File Systems Lists the device (mainpool) but has n/a's for Total, Available, Used and reports its not moutned and when I click on it the options don't allow for me to mount, unmount, etc.
- ZFS plugin installed and shows my pool with size, used, available, mountpoint, online state, and status OK. Details Below
Code
Pool status (zpool status):
pool: mainpool
state: ONLINE
scan: scrub repaired 0 in 1h36m with 0 errors on Sun Mar 12 03:00:39 2017
config:
NAME STATE READ WRITE CKSUM
mainpool ONLINE 0 0 0
ata-WDC_WD30EFRX-68EUZN0_WD-WCC4N7SZ5H5D ONLINE 0 0 0
ata-WDC_WD30EFRX-68EUZN0_WD-WCC4N5UJX3FA ONLINE 0 0 0
errors: No known data errors
Pool details (zpool get all):
NAME PROPERTY VALUE SOURCE
mainpool size 5.44T -
mainpool capacity 16% -
mainpool altroot - default
mainpool health ONLINE -
mainpool guid 5679904156188262872 default
mainpool version - default
mainpool bootfs - default
mainpool delegation on default
mainpool autoreplace off default
mainpool cachefile none local
mainpool failmode wait default
mainpool listsnapshots off default
mainpool autoexpand off default
mainpool dedupditto 0 default
mainpool dedupratio 1.00x -
mainpool free 4.53T -
mainpool allocated 934G -
mainpool readonly off -
mainpool ashift 0 default
mainpool comment - default
mainpool expandsize - -
mainpool freeing 0 default
mainpool fragmentation 3% -
mainpool leaked 0 default
mainpool feature@async_destroy enabled local
mainpool feature@empty_bpobj enabled local
mainpool feature@lz4_compress active local
mainpool feature@spacemap_histogram active local
mainpool feature@enabled_txg active local
mainpool feature@hole_birth active local
mainpool feature@extensible_dataset enabled local
mainpool feature@embedded_data active local
mainpool feature@bookmarks enabled local
mainpool feature@filesystem_limits enabled local
mainpool feature@large_blocks enabled local
Pool filesystem details (zfs get all):
NAME PROPERTY VALUE SOURCE
mainpool type filesystem -
mainpool creation Wed Dec 28 19:11 2016 -
mainpool used 934G -
mainpool available 4.36T -
mainpool referenced 934G -
mainpool compressratio 1.00x -
mainpool mounted no -
mainpool quota none default
mainpool reservation none default
mainpool recordsize 128K default
mainpool mountpoint /mainpool default
mainpool sharenfs off default
mainpool checksum on default
mainpool compression off default
mainpool atime on default
mainpool devices on default
mainpool exec on default
mainpool setuid on default
mainpool readonly off default
mainpool zoned off default
mainpool snapdir hidden default
mainpool aclinherit restricted default
mainpool canmount on default
mainpool xattr on default
mainpool copies 1 default
mainpool version 5 -
mainpool utf8only off -
mainpool normalization none -
mainpool casesensitivity sensitive -
mainpool vscan off default
mainpool nbmand off default
mainpool sharesmb off default
mainpool refquota none default
mainpool refreservation none default
mainpool primarycache all default
mainpool secondarycache all default
mainpool usedbysnapshots 0 -
mainpool usedbydataset 934G -
mainpool usedbychildren 23.9M -
mainpool usedbyrefreservation 0 -
mainpool logbias latency default
mainpool dedup off default
mainpool mlslabel none default
mainpool sync standard default
mainpool refcompressratio 1.00x -
mainpool written 934G -
mainpool logicalused 933G -
mainpool logicalreferenced 933G -
mainpool filesystem_limit none default
mainpool snapshot_limit none default
mainpool filesystem_count none default
mainpool snapshot_count none default
mainpool snapdev hidden default
mainpool acltype off default
mainpool context none default
mainpool fscontext none default
mainpool defcontext none default
mainpool rootcontext none default
mainpool relatime off default
mainpool redundant_metadata all default
mainpool overlay off default
Alles anzeigen
Any Tips on what to fix?