10Gbit NBase-T RJ-45 PCIe x4 Tehuti Network Card (TN40xx)

    • Offizieller Beitrag

    Worked on the first try on my machine. Just use my compiled module (needs the 4.9 kernel):


    wget http://omv-extras.org/testing/tn40xx.ko.gz
    gunzip tn40xx.ko.gz
    sudo cp tn40xx.ko /lib/modules/4.9.0-0.bpo.2-amd64/kernel/drivers/net/

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Yes I rebooted it.


    Here is the Output of ifconfig. It seems the network card is not there:

    modprobe tn40xx has an error:


    Here comes this out of this one:


    But i made that what you told me before:

    Zitat von subzero79

    There is a mismatch version in between the kernel and headers.


    Run apt-get update


    Then
    apt-get dist-upgrade


    So I don't know what it has now

    Yes of course


    Here it is:

    Here it is

    • Offizieller Beitrag

    You need the 4.9.0-0.bpo.2 kernel for the module I compiled. You have 4.9.0-0.bpo.1 installed.

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Offizieller Beitrag

    Post the output of the commands subzero asked for.

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Offizieller Beitrag

    I didn't see the apt-cache command output at the end. You missed an important part of his command which means you didn't add the backports repo. You typed:


    echo "deb http://httpredir.debian.org/debian jessie-backports main contrib non-free" /etc/apt/sources.list.d/backports.list


    but you need


    echo "deb http://httpredir.debian.org/debian jessie-backports main contrib non-free" > /etc/apt/sources.list.d/backports.list (note the greater than symbol after non-free)


    Run that command and then
    apt-get update
    apt-cache policy linux-image-4.9.0-0.bpo.2-amd64

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Sorry that was my fault.
    Here it is now with the greater symbol:

    • Offizieller Beitrag

    omv-update should install it now.

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden