10Gbit NBase-T RJ-45 PCIe x4 Tehuti Network Card (TN40xx)

  • Of course now it installed 4.9.0-0.bpo.2 kernel


    Code
    root@siemens666:~# apt-cache policy linux-image-4.9.0-0.bpo.2-amd64
    linux-image-4.9.0-0.bpo.2-amd64:
      Installiert:           4.9.13-1~bpo8+1
      Installationskandidat: 4.9.13-1~bpo8+1
      Paket-Pinning: 4.9.13-1~bpo8+1
      Versionstabelle:
     *** 4.9.13-1~bpo8+1 500
            100 http://httpredir.debian.org/debian/ jessie-backports/main amd64 Packages
            100 /var/lib/dpkg/status


    I installed the driver like


    Worked on the first try on my machine. Just use my compiled module (needs the 4.9 kernel):


    wget http://omv-extras.org/testing/tn40xx.ko.gz
    gunzip tn40xx.ko.gz
    sudo cp tn40xx.ko /lib/modules/4.9.0-0.bpo.2-amd64/kernel/drivers/net/





    Now i made the same like before:
    Reboot then ifconfig:



    Here I don't see the Network-Card Either.
    So I made the same like



    This one come out this time:





    After this I tryed to reboot again and watch again in ifconig:


    • Offizieller Beitrag

    Not sure why it doesn't want to load on your system. It loads on my test box. I would:


    apt-get install linux-headers-$(uname -r)
    extract the driver source (not the package I created but from the manufacturer)
    make
    sudo make install
    sudo modprobe tn40xx

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • If I type in first command, it want to get the wrong headers again?

    Code
    root@siemens666:~# apt-get install linux-headers-$(uname -r)
    Paketlisten werden gelesen... Fertig
    Abhängigkeitsbaum wird aufgebaut.
    Statusinformationen werden eingelesen.... Fertig
    E: Paket linux-headers-4.9.0-0.bpo.1-amd64 kann nicht gefunden werden.
    E: Mittels regulärem Ausdruck »linux-headers-4.9.0-0.bpo.1-amd64« konnte kein                                                                    Paket gefunden werden.


    if you have a bit of time we can try to use teamviewer...

    • Offizieller Beitrag

    If I type in first command, it want to get the wrong headers again?

    You need to reboot to use the newly installed kernel. I would also make sure grub is selecting the new kernel. You can check this in omv-extras kernel tab.

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Hi,


    I had big issues with the kernel and I can't select enaugher one again.


    Today I reinstall OMV, made the updates and after that I have automatically the actual kernel inside.


    after that I typed in:


    apt-get install linux-headers-$(uname -r)


    Then it installed all headers.


    After that I go on and made this what ryecoaaron told me:

    Worked on the first try on my machine. Just use my compiled module (needs the 4.9 kernel):


    wget http://omv-extras.org/testing/tn40xx.ko.gz
    gunzip tn40xx.ko.gz
    sudo cp tn40xx.ko /lib/modules/4.9.0-0.bpo.2-amd64/kernel/drivers/net/


    Then the network card did not work either. So I made what subzero79 told:



    Now the network card is working well.


    Many thanks to this Forum and you guys.


    Best Regards,
    Jan

    • Offizieller Beitrag

    You probably need to add tn40xx to /etc/modules so that the module is loading on boot.

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • hi, just want to know if someone get the card to work?!


    i have the same card and trying OMV to work with if. i'm getting the same problems and just not getting to work.


    if some one can help with it, i'm a total NOOB on Linux, i just know the basics....but i'm trying to build my own NAS. in brazil the solutions like Synology are incredible expensive.


    i'm trying to do a fresh install so i'm runing OMV 4.1.3-1(Arrakis)...


    i'm like a little bit desperate



    tks for now.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!