Wrong
10Gbit NBase-T RJ-45 PCIe x4 Tehuti Network Card (TN40xx)
-
-
Of course now it installed 4.9.0-0.bpo.2 kernel
Coderoot@siemens666:~# apt-cache policy linux-image-4.9.0-0.bpo.2-amd64 linux-image-4.9.0-0.bpo.2-amd64: Installiert: 4.9.13-1~bpo8+1 Installationskandidat: 4.9.13-1~bpo8+1 Paket-Pinning: 4.9.13-1~bpo8+1 Versionstabelle: *** 4.9.13-1~bpo8+1 500 100 http://httpredir.debian.org/debian/ jessie-backports/main amd64 Packages 100 /var/lib/dpkg/status
I installed the driver likeWorked on the first try on my machine. Just use my compiled module (needs the 4.9 kernel):
wget http://omv-extras.org/testing/tn40xx.ko.gz
gunzip tn40xx.ko.gz
sudo cp tn40xx.ko /lib/modules/4.9.0-0.bpo.2-amd64/kernel/drivers/net/Now i made the same like before:
Reboot then ifconfig:Code
Alles anzeigenroot@siemens666:~# ifconfig eth0 Link encap:Ethernet Hardware Adresse 2c:4d:54:56:23:5e inet Adresse:190.10.10.65 Bcast:190.10.255.255 Maske:255.255.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX packets:4106 errors:0 dropped:0 overruns:0 frame:0 TX packets:2311 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:3107599 (2.9 MiB) TX bytes:574703 (561.2 KiB) Interrupt:16 Speicher:f7100000-f7120000 lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:65536 Metrik:1 RX packets:666 errors:0 dropped:0 overruns:0 frame:0 TX packets:666 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1 RX bytes:77101 (75.2 KiB) TX bytes:77101 (75.2 KiB)
Here I don't see the Network-Card Either.
So I made the same likeCan you post here
Try
depmod
The run
modprobe tn40xx
Check again if the card appears using ifconfig command
This one come out this time:Code
Alles anzeigenroot@siemens666:~# depmod root@siemens666:~# modprobe tn40xx modprobe: ERROR: could not insert 'tn40xx': Exec format error root@siemens666:~# ifconfig eth0 Link encap:Ethernet Hardware Adresse 2c:4d:54:56:23:5e inet Adresse:190.10.10.65 Bcast:190.10.255.255 Maske:255.255.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX packets:4310 errors:0 dropped:0 overruns:0 frame:0 TX packets:2432 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:3211787 (3.0 MiB) TX bytes:603461 (589.3 KiB) Interrupt:16 Speicher:f7100000-f7120000 lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:65536 Metrik:1 RX packets:696 errors:0 dropped:0 overruns:0 frame:0 TX packets:696 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1 RX bytes:80596 (78.7 KiB) TX bytes:80596 (78.7 KiB)
After this I tryed to reboot again and watch again in ifconig:Code
Alles anzeigeneth0 Link encap:Ethernet Hardware Adresse 2c:4d:54:56:23:5e inet Adresse:190.10.10.65 Bcast:190.10.255.255 Maske:255.255.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX packets:116 errors:0 dropped:0 overruns:0 frame:0 TX packets:144 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:44917 (43.8 KiB) TX bytes:27261 (26.6 KiB) Interrupt:16 Speicher:f7100000-f7120000 lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:65536 Metrik:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1 RX bytes:740 (740.0 B) TX bytes:740 (740.0 B)
-
Not sure why it doesn't want to load on your system. It loads on my test box. I would:
apt-get install linux-headers-$(uname -r)
extract the driver source (not the package I created but from the manufacturer)
make
sudo make install
sudo modprobe tn40xx -
If I type in first command, it want to get the wrong headers again?
Coderoot@siemens666:~# apt-get install linux-headers-$(uname -r) Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig E: Paket linux-headers-4.9.0-0.bpo.1-amd64 kann nicht gefunden werden. E: Mittels regulärem Ausdruck »linux-headers-4.9.0-0.bpo.1-amd64« konnte kein Paket gefunden werden.
if you have a bit of time we can try to use teamviewer... -
For this whole bunch of stress, I would have kicked the NIC right in the arse...again and again...
-
If it doesn't be so high on the wall i would kick it
-
If I type in first command, it want to get the wrong headers again?
You need to reboot to use the newly installed kernel. I would also make sure grub is selecting the new kernel. You can check this in omv-extras kernel tab.
-
Hi,
I had big issues with the kernel and I can't select enaugher one again.
Today I reinstall OMV, made the updates and after that I have automatically the actual kernel inside.
after that I typed in:
apt-get install linux-headers-$(uname -r)
Then it installed all headers.
After that I go on and made this what ryecoaaron told me:
Worked on the first try on my machine. Just use my compiled module (needs the 4.9 kernel):
wget http://omv-extras.org/testing/tn40xx.ko.gz
gunzip tn40xx.ko.gz
sudo cp tn40xx.ko /lib/modules/4.9.0-0.bpo.2-amd64/kernel/drivers/net/
Then the network card did not work either. So I made what subzero79 told:Can you post here
Try
depmod
The run
modprobe tn40xx
Check again if the card appears using ifconfig command
Now the network card is working well.Many thanks to this Forum and you guys.
Best Regards,
Jan -
You probably need to add tn40xx to /etc/modules so that the module is loading on boot.
-
hi, just want to know if someone get the card to work?!
i have the same card and trying OMV to work with if. i'm getting the same problems and just not getting to work.
if some one can help with it, i'm a total NOOB on Linux, i just know the basics....but i'm trying to build my own NAS. in brazil the solutions like Synology are incredible expensive.
i'm trying to do a fresh install so i'm runing OMV 4.1.3-1(Arrakis)...
i'm like a little bit desperate
tks for now.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!