WD MyCloud GEN1 - Bricked? or Bootloop - Need Help

  • Hello,


    I come from Germany so that is why my English is extremely bad. *Sorry*
    But I hope it is understandable enough.


    I do not know what exactly happened, but my wd gen1 doesn´t boot no longer correct.


    The led lights up for a few minutes red I think, it could also be orange / green.
    Then the LED goes off and directly on again exactly in the colors again.
    It looks like a bootloop.


    Access over Lan doesn´t work...
    So I connected the wd hdd over sata directly to the pc.
    In geparted I could not find any errors with the partitions(layout).
    And the raid works correctly, i think.
    The content on md0 and md1 also exists.


    What can I do to fixed the "bootloop"?
    Without a re- or newinstall of Debian and OMV Erasmus 3.0.69
    on WD My Cloud 6TB GEN1.


    BIG THX

  • Thanks.



    The Problem is that i can´t connect over Lan.
    The Networkinterface didn´t have a Ipadress.
    DHCP or Static did not works so that i can not connect over SSH to the Drive.


    Is there an automatic created Log file after the normally Boot?
    that Shows any Errors and the bootup?


    So then i can connect the Drive over Sata to the PC and read this Log.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!