Hi
I've installed openmediavault-openvpn 3.0.6 plugin but I don't know to configure it.
My gateway interface is wlan0, my internal net is: 192.168.1.0
Can you help me? Can you send me step by step the instruction?
Thanks
Hi
I've installed openmediavault-openvpn 3.0.6 plugin but I don't know to configure it.
My gateway interface is wlan0, my internal net is: 192.168.1.0
Can you help me? Can you send me step by step the instruction?
Thanks
Hello,
I will explain you options and point what you should modify.
Go to OpenVPN plugin tab in WebUI
General Settings
Enable (YES)
Port (use port you like {must be open on router} but prefered is default)
Protocol (TCP)
Use compression (YES)
PAM authentication (not a must but better to secure connection, allow only OMV users to connect with internal account)
Extra options (BLANK - no need to change anything)
Logging level (prefered Normal usage output, use what you like)
VPN network
Address (address of connected clients, must be different then your local network address, prefered default)
Mask (no need to change)
Gateway (default network interface of your OMV, for me it is eth0)
Default gateway (YES {if you have slow internet use NO})
Client to client (YES {enable communication with all hosts in network, those in local LAN and VPN connected})
DHCP options
DNS server (your router local LAN address)
DNS search domains (leave BLANK)
WINS server (leave BLANK)
Public
Public address (your public internet IP or DDNS host if your IP changes)
That's all If you like to know why those settings not others read OVPN documentation, it will be easier for you to understand how it works.
Thanks, now works. I was wrong to setting Vpn Network Address (I used my ip lan).
Hello,
Good to hear.
If you consider this helped you please like this post and close thread by marking it Resolved
Wish you good time with OMV!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!