Upgraded to 3.0, can't login with admin (resolved)

  • Hi there,


    Before i did the update i checked that all plugins are supported by 3.0.


    Update ran and there were some errors about Postfix, bsd-mailx and two others that i did not take note of now. Tried a reboot and then apt-get -f install.


    Seems like everything is done and did a reboot again.


    Most of my plugins have started and seems to be working except for plex.


    Now i cant login to my admin gui.


    Can anyone help with this below??


    results of dpkg -l | grep openm


    ii openmediavault 3.0.80 all Open network attached storage solution
    ii openmediavault-backup 1.0.11 all backup plugin for OpenMediaVault.
    ii openmediavault-fail2ban 1.1.5 all OpenMediaVault Fail2ban plugin
    pc openmediavault-flashmemory 1.7 all fs2ram plugin for OpenMediaVault
    ii openmediavault-keyring 1.0 all GnuPG archive keys of the OpenMediaVault archive
    ii openmediavault-nut 3.2.12 all OpenMediaVault Network UPS Tools (NUT) plugin
    ii openmediavault-plexmediaserver 1.0.15 all OpenMediaVault Plex Media Server plugin
    ii openmediavault-pyload 1.0.4 all OpenMediaVault pyLoad plugin
    ii openmediavault-radarr 2.0 all OpenMediaVault Radarr plugin
    ii openmediavault-sabnzbd 1.0.12 all OpenMediaVault SABnzbd plugin
    ii openmediavault-sonarr 1.1 all OpenMediaVault Sonarr(NzbDrone) plugin
    ii openmediavault-teamspeak3 2.2 all OpenMediaVault TeamSpeak 3 plugin
    ii openmediavault-transmissionbt 1.4 all OpenMediaVault Transmission (BitTorrent client) plugin.
    ii openmediavault-virtualbox 1.3 all VirtualBox plugin for OpenMediaVault.



    OMV - v6 - Media Server


    Lian-Li PC-Q25 | Asrock E3C226D2I | Intel® Xeon® Processor E3-1230 v3 | Kingston Valueram 8Gb ddr3-1600 with ECC | OS: Adata SP600 32GB SSD * DATA: 4 x WD 2TB RED HDD's (RAID5)

    • Offizieller Beitrag

    None of the plugins with a version less than 3.0 will work. You either need to remove them or try to upgrade them to get the web interface to work.

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Hi
    There has been a lot of wrong
    Look under:


    nano /etc/apt/sources.list.d/omv-extras-org.list
    the existence:


    # This is file is generated.
    # OMV-Extras repos
    #
    # OMV-Extras.org
    deb https://dl.bintray.com/openmed…plugin-developers/erasmus jessie main
    # OMV-Extras.org Testing
    deb https://dl.bintray.com/openmed…evelopers/erasmus-testing jessie main


    Your plugins are for OMV2
    http://omv-extras.org/joomla/
    And compare there the plugins some there is no longer and must be uninstalled

    https://github.com/Wolf2000Pi


    OMV6 Hewlett-Packard HPE-411at - Intel Core i7 CPU 870 @ 2.93GHz - 16GB Ram

    Proxmox omv 7 sandworm Dell OptiPlex 7050 i5-6500 CPU @ 3.20GHz - 32GB Ram (Test!!!!)

  • Okay so do I have to apt-get remove all of them? Will I lose all my settings also?

    OMV - v6 - Media Server


    Lian-Li PC-Q25 | Asrock E3C226D2I | Intel® Xeon® Processor E3-1230 v3 | Kingston Valueram 8Gb ddr3-1600 with ECC | OS: Adata SP600 32GB SSD * DATA: 4 x WD 2TB RED HDD's (RAID5)

    Einmal editiert, zuletzt von Sn00zE ()

  • The file is completely empty. Should I add these from above?

    OMV - v6 - Media Server


    Lian-Li PC-Q25 | Asrock E3C226D2I | Intel® Xeon® Processor E3-1230 v3 | Kingston Valueram 8Gb ddr3-1600 with ECC | OS: Adata SP600 32GB SSD * DATA: 4 x WD 2TB RED HDD's (RAID5)

  • I have checked that each plugin is supported in my vm and made sure it installed.


    Will add those and do the update/upgrade.

    OMV - v6 - Media Server


    Lian-Li PC-Q25 | Asrock E3C226D2I | Intel® Xeon® Processor E3-1230 v3 | Kingston Valueram 8Gb ddr3-1600 with ECC | OS: Adata SP600 32GB SSD * DATA: 4 x WD 2TB RED HDD's (RAID5)

  • Okay after doing a bunch of things and some cleanups i got this far:


    ii openmediavault 3.0.80 all Open network attached storage solution
    ii openmediavault-backup 3.6 all backup plugin for OpenMediaVault.
    ii openmediavault-nut 3.2.12 all OpenMediaVault Network UPS Tools (NUT) plugin
    ii openmediavault-plexmediaserver 1.0.15 all OpenMediaVault Plex Media Server plugin
    ii openmediavault-pyload 3.0 all OpenMediaVault pyLoad plugin
    ii openmediavault-radarr 3.0 all OpenMediaVault Radarr plugin
    ii openmediavault-sabnzbd 3.2.4 all SABnzbd plugin for OpenMediaVault.
    ii openmediavault-sonarr 3.2 all OpenMediaVault Sonarr plugin
    ii openmediavault-teamspeak3 3.4 all OpenMediaVault TeamSpeak 3 plugin
    ii openmediavault-transmissionbt 3.0.9 all OpenMediaVault Transmission (BitTorrent client) plugin.


    Is there a way to upgrade plex without purging it?

    OMV - v6 - Media Server


    Lian-Li PC-Q25 | Asrock E3C226D2I | Intel® Xeon® Processor E3-1230 v3 | Kingston Valueram 8Gb ddr3-1600 with ECC | OS: Adata SP600 32GB SSD * DATA: 4 x WD 2TB RED HDD's (RAID5)

    2 Mal editiert, zuletzt von Sn00zE ()

  • Finally figured it out, had to add plex to my sources list


    nano /etc/apt/sources.list.d/omv-extras-org.list
    deb https://dl.bintray.com/openmed…n-developers/erasmus-plex jessie main


    apt-get update
    apt-get upgrade


    plex updeted and i could login.


    Had to reinstall my bittorrent and teamspeak server, but everything else seems to be working.

    OMV - v6 - Media Server


    Lian-Li PC-Q25 | Asrock E3C226D2I | Intel® Xeon® Processor E3-1230 v3 | Kingston Valueram 8Gb ddr3-1600 with ECC | OS: Adata SP600 32GB SSD * DATA: 4 x WD 2TB RED HDD's (RAID5)

    2 Mal editiert, zuletzt von Sn00zE ()

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!