try to configure raid 1, but can't mount 2nd WD 8TB RED in OMV v3.0.79, Dell Poweredge T100

  • Some context:

    • I re-purpose my Dell Poweredge T100 (Pentium E5400, 2.7GHz, 2MB Cache,800MH 2, 4GB DDR2 memory, 32-bit) as NAS, it support 2 SATA and 2 SAS drive.
    • I have two WD 8TB RED disk, I can see them in bios
    • I install OMV 3.0.79, boot from a 8GB USB stick
    • My goal is to set up raid 1

    Some questions:
    Q1:How can I configure raid 1 ?


    Q2: in this screenshot (http://imgur.com/a/HrPTY), I can't mount2nd WD disk, I don’t know why?


    Thank you!

    Dell Poweredge T100 (Pentium E5400, 2.7GHz, 2MB Cache,800MH 2, 4GB DDR2 memory, 32-bit)
    OMV 3.0.39
    2 8TB WD RED, RAID 1

  • Hi votdev, please see the output of fstab, thank you!



    # bakcup UUID=ec345fb1-83b8-45d8-bf75-3b7e20073983 / ext4 error s=remount-ro 0 1
    UUID=ec345fb1-83b8-45d8-bf75-3b7e20073983 / ext4 noatime,nodiratim e, errors=remount-ro 0 1


    # swap was on /dev/sdb5 during installation
    # comment out due to flash memory UUID=d774a9d9-e29d-4e09-927f-faff050d2 cda none swap sw 0 0
    tmpfs /tmp tmpfs defaults 0 0
    # >>> [openmediavault]
    /dev/disk/by-label/wd8tbext4 /srv/dev-disk-by-label-wd8tbext4 ext4 defaults,nofa il,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,ac l 0 2
    /dev/disk/by-label/MagicRubber /srv/dev-disk-by-label-MagicRubber ntfs defaults, nofail 0 2
    # <<< [openmediavault]

    Dell Poweredge T100 (Pentium E5400, 2.7GHz, 2MB Cache,800MH 2, 4GB DDR2 memory, 32-bit)
    OMV 3.0.39
    2 8TB WD RED, RAID 1

  • sure, here you go:


    /dev/sdb: UUID="13eb6c8e-5e08-2ddc-cb03-56650586add6" UUID_SUB="29a35ee6-52dc-41 cc-9597-37bd00176506" LABEL="mothership:RAID1" TYPE="linux_raid_member"
    /dev/md0: LABEL="wd8tbext4" UUID="f237d4dc-ec71-4041-a1ff-ed54e6498e5b" TYPE="ex t4"
    /dev/sda: UUID="13eb6c8e-5e08-2ddc-cb03-56650586add6" UUID_SUB="45eeb61a-5d60-49 d1-e9e5-6c1fa11cc36d" LABEL="mothership:RAID1" TYPE="linux_raid_member"
    /dev/sdc1: LABEL="MagicRubber" UUID="F474B7AA74B76DCC" TYPE="ntfs" PARTUUID="104 34133-01"
    /dev/sdd1: UUID="ec345fb1-83b8-45d8-bf75-3b7e20073983" TYPE="ext4" PARTUUID="19a d4fc0-01"
    /dev/sdd5: UUID="d774a9d9-e29d-4e09-927f-faff050d2cda" TYPE="swap" PARTUUID="19a d4fc0-05"

    Dell Poweredge T100 (Pentium E5400, 2.7GHz, 2MB Cache,800MH 2, 4GB DDR2 memory, 32-bit)
    OMV 3.0.39
    2 8TB WD RED, RAID 1

  • Hi votdev,


    Sorry didn't reply sooner. I figured it out. I need to wipe these two drives first, then it works


    Thank you!

    Dell Poweredge T100 (Pentium E5400, 2.7GHz, 2MB Cache,800MH 2, 4GB DDR2 memory, 32-bit)
    OMV 3.0.39
    2 8TB WD RED, RAID 1

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!