OMV Sensors some information is missing

    • OMV 3.x

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • OMV Sensors some information is missing

      I installed OMV Sensors, plugin works for CPU+GPU temperature, but mainboard temperatures and fan speeds do not show up in dashboard graph. Is it possible for AMD cpus do show temperatures for each core?

      Board is ASRock AM1H-ITX (Bios 1.50), CPU is AMD Athlon 5350.


      Source Code

      1. root@server:~# sensors
      2. radeon-pci-0008
      3. Adapter: PCI adapter
      4. temp1: +25.0°C (crit = +120.0°C, hyst = +90.0°C)
      5. k10temp-pci-00c3
      6. Adapter: PCI adapter
      7. temp1: +25.2°C (high = +70.0°C)
      8. (crit = +70.0°C, hyst = +69.0°C)
      9. fam15h_power-pci-00c4
      10. Adapter: PCI adapter
      11. power1: N/A (crit = 25.00 W)
      Display All

      Source Code

      1. # sensors-detect revision $Revision$
      2. # Board: ASRock AM1H-ITX
      3. # Kernel: 4.9.0-0.bpo.3-amd64 x86_64
      4. # Processor: AMD Athlon(tm) 5350 APU with Radeon(tm) R3 (22/0/1)
      5. Running in automatic mode, default answers to all questions
      6. are assumed.
      7. Some south bridges, CPUs or memory controllers contain embedded sensors.
      8. Do you want to scan for them? This is totally safe. (YES/no):
      9. Silicon Integrated Systems SIS5595... No
      10. VIA VT82C686 Integrated Sensors... No
      11. VIA VT8231 Integrated Sensors... No
      12. AMD K8 thermal sensors... No
      13. AMD Family 10h thermal sensors... No
      14. AMD Family 11h thermal sensors... No
      15. AMD Family 12h and 14h thermal sensors... No
      16. AMD Family 15h thermal sensors... No
      17. AMD Family 16h thermal sensors... Success!
      18. (driver `k10temp')
      19. AMD Family 15h power sensors... No
      20. AMD Family 16h power sensors... Success!
      21. (driver `fam15h_power')
      22. Intel digital thermal sensor... No
      23. Intel AMB FB-DIMM thermal sensor... No
      24. Intel 5500/5520/X58 thermal sensor... No
      25. VIA C7 thermal sensor... No
      26. VIA Nano thermal sensor... No
      27. Some Super I/O chips contain embedded sensors. We have to write to
      28. standard I/O ports to probe them. This is usually safe.
      29. Do you want to scan for Super I/O sensors? (YES/no):
      30. Probing for Super-I/O at 0x2e/0x2f
      31. Trying family `National Semiconductor/ITE'... No
      32. Trying family `SMSC'... No
      33. Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes
      34. Found `Nuvoton NCT5573D/NCT5577D/NCT6776F Super IO Sensors' Success!
      35. (address 0x290, driver `nct6775')
      36. Probing for Super-I/O at 0x4e/0x4f
      37. Trying family `National Semiconductor/ITE'... No
      38. Trying family `SMSC'... No
      39. Trying family `VIA/Winbond/Nuvoton/Fintek'... No
      40. Trying family `ITE'... No
      41. Some systems (mainly servers) implement IPMI, a set of common interfaces
      42. through which system health data may be retrieved, amongst other things.
      43. We first try to get the information from SMBIOS. If we don't find it
      44. there, we have to read from arbitrary I/O ports to probe for such
      45. interfaces. This is normally safe. Do you want to scan for IPMI
      46. interfaces? (YES/no):
      47. Probing for `IPMI BMC KCS' at 0xca0... No
      48. Probing for `IPMI BMC SMIC' at 0xca8... No
      49. Some hardware monitoring chips are accessible through the ISA I/O ports.
      50. We have to write to arbitrary I/O ports to probe them. This is usually
      51. safe though. Yes, you do have ISA I/O ports even if you do not have any
      52. ISA slots! Do you want to scan the ISA I/O ports? (yes/NO):
      53. Lastly, we can probe the I2C/SMBus adapters for connected hardware
      54. monitoring devices. This is the most risky part, and while it works
      55. reasonably well on most systems, it has been reported to cause trouble
      56. on some systems.
      57. Do you want to probe the I2C/SMBus adapters now? (YES/no):
      58. Using driver `i2c-piix4' for device 0000:00:14.0: AMD Hudson-2 SMBus
      59. Module i2c-dev loaded successfully.
      60. Next adapter: SMBus PIIX4 adapter port 0 at 0b00 (i2c-0)
      61. Do you want to scan it? (yes/NO/selectively):
      62. Next adapter: SMBus PIIX4 adapter port 2 at 0b00 (i2c-1)
      63. Do you want to scan it? (yes/NO/selectively):
      64. Next adapter: SMBus PIIX4 adapter port 3 at 0b00 (i2c-2)
      65. Do you want to scan it? (yes/NO/selectively):
      66. Next adapter: SMBus PIIX4 adapter port 4 at 0b00 (i2c-3)
      67. Do you want to scan it? (yes/NO/selectively):
      68. Next adapter: SMBus PIIX4 adapter port 1 at 0b20 (i2c-4)
      69. Do you want to scan it? (yes/NO/selectively):
      70. Next adapter: Radeon i2c bit bus 0x90 (i2c-5)
      71. Do you want to scan it? (yes/NO/selectively):
      72. Next adapter: Radeon i2c bit bus 0x91 (i2c-6)
      73. Do you want to scan it? (yes/NO/selectively):
      74. Next adapter: Radeon i2c bit bus 0x92 (i2c-7)
      75. Do you want to scan it? (yes/NO/selectively):
      76. Next adapter: Radeon i2c bit bus 0x93 (i2c-8)
      77. Do you want to scan it? (yes/NO/selectively):
      78. Next adapter: Radeon i2c bit bus 0x94 (i2c-9)
      79. Do you want to scan it? (yes/NO/selectively):
      80. Next adapter: Radeon i2c bit bus 0x95 (i2c-10)
      81. Do you want to scan it? (yes/NO/selectively):
      82. Next adapter: Radeon i2c bit bus 0x96 (i2c-11)
      83. Do you want to scan it? (yes/NO/selectively):
      84. Next adapter: Radeon i2c bit bus 0x97 (i2c-12)
      85. Do you want to scan it? (yes/NO/selectively):
      86. Now follows a summary of the probes I have just done.
      87. Driver `k10temp' (autoloaded):
      88. * Chip `AMD Family 16h thermal sensors' (confidence: 9)
      89. Driver `nct6775':
      90. * ISA bus, address 0x290
      91. Chip `Nuvoton NCT5573D/NCT5577D/NCT6776F Super IO Sensors' (confidence: 9)
      92. Driver `fam15h_power' (autoloaded):
      93. * Chip `AMD Family 16h power sensors' (confidence: 9)
      94. Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO):
      95. To load everything that is needed, add this to one of the system
      96. initialization scripts (e.g. /etc/rc.d/rc.local):
      97. #----cut here----
      98. # Chip drivers
      99. modprobe nct6775
      100. /usr/bin/sensors -s
      101. #----cut here----
      102. You really should try these commands right now to make sure everything
      103. is working properly. Monitoring programs won't work until the needed
      104. modules are loaded.
      105. Unloading i2c-dev... OK
      Display All
      Edit:

      Running

      Source Code

      1. modprobe nct6775
      2. /usr/bin/sensors -s
      enabled fan speeds and mainboard-temperature in logs. To change settings for fans would be really nice.
      Chaos is found in greatest abundance wherever order is being sought.
      It always defeats order, because it is better organized.
      Terry Pratchett

      The post was edited 1 time, last by riff-raff ().