Just acquired 2 HP Microservers, an N36l and an N54l. I have flashed the BIOS to a custom ROM to get more options and enable ACHI. On installation of OMV 3.X at the disc detection stage, if my SSD is on the HP SATA port designated for the ODD, it is not detected. However plugging it into one of the hard drive slots, install goes smoothly. I have moved the drive back to the ODD sata slot and it boots up and all is well.
Any idea why it is not detected on the ODD slot during installation? The BIOS see's it just fine and ACHI is all setup and working. If I have to reinstall, I just don't want to strip down the server to install OMV and then put the drive back (these will be my test servers).