Things went South after update

    • OMV 3.x

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Things go South after update

      Hello,

      I've got Banana Pi with OMV 3 - Armbian based (simplenas.com/download/bananas-simple-system) (+ couple HDDs connected).

      About 4 days ago I have decided to update OMV. Update didn't finish, error came up in progress window. After restart keeps rebooting. I've tried get to get it fixed.. last attempt was to get backup files (from OMB backup function) back on SD card but with no success - is it just copy and paste? After 4 days I have surrender.

      I've started new installation of OMV 3. First I did apt-get update and upgrade. Went OK.
      When I came to OMV updates there was still some left updated. So I have run them but error came up in progress window,.. again. I have restarted OMV after while. Fortunately at least boots up but unfortunately I cannot access anymore OMV web interface.
      Now on apt-get upgrade I get this progress/errors:

      Source Code

      1. apt-get upgrade
      2. Reading package lists... Done
      3. Building dependency tree
      4. Reading state information... Done
      5. Calculating upgrade... Done
      6. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
      7. 4 not fully installed or removed.
      8. After this operation, 0 B of additional disk space will be used.
      9. Do you want to continue? [Y/n] y
      10. Setting up openmediavault (3.0.84) ...
      11. Updating configuration database ...
      12. Running migration conf_3.0.68
      13. Updating configuration ...
      14. /usr/bin/deb-systemd-helper: error: unable to read ntp.service
      15. dpkg: error processing package openmediavault (--configure):
      16. subprocess installed post-installation script returned error exit status 1
      17. dpkg: dependency problems prevent configuration of openmediavault-omvextrasorg:
      18. openmediavault-omvextrasorg depends on openmediavault (>= 3.0.67); however:
      19. Package openmediavault is not configured yet.
      20. dpkg: error processing package openmediavault-omvextrasorg (--configure):
      21. dependency problems - leaving unconfigured
      22. dpkg: dependency problems prevent configuration of openmediavault-downloader:
      23. openmediavault-downloader depends on openmediavault (>= 3.0.67); however:
      24. Package openmediavault is not configured yet.
      25. dpkg: error processing package openmediavault-downloader (--configure):
      26. dependency problems - leaving unconfigured
      27. dpkg: dependency problems prevent configuration of openmediavault-minidlna:
      28. openmediavault-minidlna depends on openmediavault (>= 3.0.67); however:
      29. Package openmediavault is not configured yet.
      30. dpkg: error processing package openmediavault-minidlna (--configure):
      31. dependency problems - leaving unconfigured
      32. Errors were encountered while processing:
      33. openmediavault
      34. openmediavault-omvextrasorg
      35. openmediavault-downloader
      36. openmediavault-minidlna
      37. E: Sub-process /usr/bin/dpkg returned an error code (1)
      Display All

      My goal is to get working updated installation of OMV 3. Or some kind of state of update which is stable.

      Also would I win bit more with USB flash drive instead SD card? For better/faster backup recovery...
    • houndhunger wrote:

      My goal is to get working updated installation of OMV 3.
      sourceforge.net/projects/openm…s/Other%20armhf%20images/

      Please use the official Banana Pi image instead (also based on Armbian but with a lot of performance tweaks and flashmemory plug-in enabled by default) and follow the initial steps here: forum.openmediavault.org/index.php/Thread/18991 (Etcher, SD card check, be somewhat patient since Banana reboots one time automatically but this should not take longer than 3 minutes)

      Just tested it. Full 'armbianmonitor -u' output: sprunge.us/VcTQ

      Update log:

      Source Code

      1. root@bananapi:~# apt upgrade -y -q
      2. Reading package lists...
      3. Building dependency tree...
      4. Reading state information...
      5. Calculating upgrade... The following package was automatically installed and is no longer required:
      6. libjs-extjs5
      7. Use 'apt-get autoremove' to remove it.
      8. Done
      9. The following NEW packages will be installed:
      10. libjs-extjs6
      11. The following packages will be upgraded:
      12. armbian-firmware armbian-tools-jessie base-files bind9-host binutils ca-certificates debian-archive-keyring dnsutils git git-man hostapd initramfs-tools
      13. libasn1-8-heimdal libbind9-90 libc-bin libc-dev-bin libc6 libc6-dev libdns-export100 libdns100 libexpat1 libffi6 libfreetype6 libgcrypt20 libgnutls-deb0-28
      14. libgnutls-openssl27 libgraphite2-3 libgudev-1.0-0 libhcrypto4-heimdal libhdb9-heimdal libheimbase1-heimdal libhx509-5-heimdal libirs-export91 libisc-export95 libisc95
      15. libisccc90 libisccfg-export90 libisccfg90 libkrb5-26-heimdal libldap-2.4-2 liblwres90 libmysqlclient18 libpam-systemd libperl5.20 libroken18-heimdal librtmp1
      16. libsystemd0 libtasn1-6 libtiff5 libtirpc1 libudev1 libwbclient0 libwind0-heimdal libxslt1.1 linux-dtb-next-sunxi linux-headers-next-sunxi linux-image-next-sunxi
      17. linux-jessie-root-next-bananapi linux-libc-dev linux-u-boot-bananapi-next locales login multiarch-support mysql-common nginx nginx-common nginx-full openmediavault
      18. openmediavault-omvextrasorg passwd perl perl-base perl-modules postfix python-samba rpcbind samba samba-common samba-common-bin samba-dsdb-modules samba-libs
      19. samba-vfs-modules sudo sunxi-tools systemd systemd-sysv udev unzip vim vim-common vim-runtime vim-tiny wget
      20. 93 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
      21. Need to get 101 MB of archives.
      22. After this operation, 142 MB of additional disk space will be used.
      23. Get:1 http://security.debian.org/ jessie/updates/main login armhf 1:4.2-3+deb8u4 [719 kB]
      24. Get:2 http://apt.armbian.com/ jessie/main armbian-firmware armhf 5.30 [1,803 kB]
      25. Get:3 http://security.debian.org/ jessie/updates/main perl armhf 5.20.2-3+deb8u7 [2,076 kB]
      26. Get:4 https://dl.bintray.com/openmediavault-plugin-developers/erasmus/ jessie/main openmediavault-omvextrasorg all 3.4.26 [48.3 kB]
      27. Get:5 http://httpredir.debian.org/debian/ jessie/main base-files armhf 8+deb8u8 [69.7 kB]
      28. Get:6 http://httpredir.debian.org/debian/ jessie/main libudev1 armhf 215-17+deb8u7 [53.1 kB]
      29. Get:7 http://httpredir.debian.org/debian/ jessie/main udev armhf 215-17+deb8u7 [853 kB]
      30. Get:8 http://security.debian.org/ jessie/updates/main libperl5.20 armhf 5.20.2-3+deb8u7 [1,350 B]
      31. Get:9 http://security.debian.org/ jessie/updates/main perl-base armhf 5.20.2-3+deb8u7 [1,129 kB]
      32. Get:10 http://apt.armbian.com/ jessie/main armbian-tools-jessie armhf 5.30 [15.4 kB]
      33. Get:11 http://httpredir.debian.org/debian/ jessie/main initramfs-tools all 0.120+deb8u3 [96.7 kB]
      34. Get:12 http://apt.armbian.com/ jessie/utils hostapd armhf 1:2.5~armbian5.31+1 [306 kB]
      35. Get:13 http://httpredir.debian.org/debian/ jessie/main libsystemd0 armhf 215-17+deb8u7 [83.1 kB]
      36. Get:14 https://openmediavault.github.io/packages/ erasmus/main libjs-extjs6 all 6.2.0.981-2 [16.2 MB]
      37. Get:15 http://httpredir.debian.org/debian/ jessie/main systemd armhf 215-17+deb8u7 [2,316 kB]
      38. Get:16 http://apt.armbian.com/ jessie/main linux-dtb-next-sunxi armhf 5.32 [139 kB]
      39. Get:17 http://apt.armbian.com/ jessie/main linux-headers-next-sunxi armhf 5.32 [10.4 MB]
      40. Get:18 http://security.debian.org/ jessie/updates/main perl-modules all 5.20.2-3+deb8u7 [2,547 kB]
      41. Get:19 http://httpredir.debian.org/debian/ jessie/main systemd-sysv armhf 215-17+deb8u7 [36.7 kB]
      42. Get:20 http://httpredir.debian.org/debian/ jessie/main libpam-systemd armhf 215-17+deb8u7 [115 kB]
      43. Get:21 http://httpredir.debian.org/debian/ jessie/main libfreetype6 armhf 2.5.2-3+deb8u2 [417 kB]
      44. Get:22 http://httpredir.debian.org/debian/ jessie/main libgudev-1.0-0 armhf 215-17+deb8u7 [40.8 kB]
      45. Get:23 http://httpredir.debian.org/debian/ jessie/main mysql-common all 5.5.55-0+deb8u1 [86.0 kB]
      46. Get:24 http://httpredir.debian.org/debian/ jessie/main libmysqlclient18 armhf 5.5.55-0+deb8u1 [633 kB]
      47. Get:25 http://security.debian.org/ jessie/updates/main libc6-dev armhf 2.19-18+deb8u10 [1,750 kB]
      48. Get:26 http://httpredir.debian.org/debian/ jessie/main libxslt1.1 armhf 1.1.28-2+deb8u3 [215 kB]
      49. Get:27 http://httpredir.debian.org/debian/ jessie-updates/main debian-archive-keyring all 2017.5~deb8u1 [56.7 kB]
      50. Get:28 http://httpredir.debian.org/debian/ jessie/main vim armhf 2:7.4.488-7+deb8u3 [827 kB]
      51. Get:29 http://security.debian.org/ jessie/updates/main libc-dev-bin armhf 2.19-18+deb8u10 [232 kB]
      52. Get:30 http://httpredir.debian.org/debian/ jessie/main vim-tiny armhf 2:7.4.488-7+deb8u3 [362 kB]
      53. Get:31 http://security.debian.org/ jessie/updates/main linux-libc-dev armhf 3.16.43-2+deb8u2 [1,041 kB]
      54. Get:32 http://httpredir.debian.org/debian/ jessie/main vim-runtime all 2:7.4.488-7+deb8u3 [5,048 kB]
      55. Get:33 http://security.debian.org/ jessie/updates/main rpcbind armhf 0.2.1-6+deb8u2 [38.0 kB]
      56. Get:34 http://security.debian.org/ jessie/updates/main libc-bin armhf 2.19-18+deb8u10 [1,159 kB]
      57. Get:35 http://security.debian.org/ jessie/updates/main libc6 armhf 2.19-18+deb8u10 [3,965 kB]
      58. Get:36 http://httpredir.debian.org/debian/ jessie/main vim-common armhf 2:7.4.488-7+deb8u3 [184 kB]
      59. Get:37 http://httpredir.debian.org/debian/ jessie/main wget armhf 1.16-1+deb8u2 [477 kB]
      60. Get:38 http://httpredir.debian.org/debian/ jessie/main binutils armhf 2.25-5+deb8u1 [3,537 kB]
      61. Get:39 http://apt.armbian.com/ jessie/main linux-image-next-sunxi armhf 5.32 [16.0 MB]
      62. Get:40 http://security.debian.org/ jessie/updates/main libtirpc1 armhf 0.2.5-1+deb8u1 [70.4 kB]
      63. Get:41 http://security.debian.org/ jessie/updates/main libgcrypt20 armhf 1.6.3-2+deb8u4 [354 kB]
      64. Get:42 http://security.debian.org/ jessie/updates/main libgnutls-openssl27 armhf 3.3.8-6+deb8u6 [140 kB]
      65. Get:43 http://security.debian.org/ jessie/updates/main libtasn1-6 armhf 4.2-3+deb8u3 [43.3 kB]
      66. Get:44 http://security.debian.org/ jessie/updates/main libgnutls-deb0-28 armhf 3.3.8-6+deb8u6 [635 kB]
      67. Get:45 http://security.debian.org/ jessie/updates/main libldap-2.4-2 armhf 2.4.40+dfsg-1+deb8u3 [195 kB]
      68. Get:46 http://security.debian.org/ jessie/updates/main libroken18-heimdal armhf 1.6~rc2+dfsg-9+deb8u1 [56.5 kB]
      69. Get:47 http://httpredir.debian.org/debian/ jessie/main ca-certificates all 20141019+deb8u3 [207 kB]
      70. Get:48 http://security.debian.org/ jessie/updates/main libasn1-8-heimdal armhf 1.6~rc2+dfsg-9+deb8u1 [170 kB]
      71. Get:49 http://security.debian.org/ jessie/updates/main libisc-export95 armhf 1:9.9.5.dfsg-9+deb8u12 [128 kB]
      72. Get:50 http://httpredir.debian.org/debian/ jessie/main postfix armhf 2.11.3-1+deb8u2 [1,310 kB]
      73. Get:51 http://security.debian.org/ jessie/updates/main libdns-export100 armhf 1:9.9.5.dfsg-9+deb8u12 [416 kB]
      74. Get:52 http://security.debian.org/ jessie/updates/main libexpat1 armhf 2.1.0-6+deb8u4 [61.8 kB]
      75. Get:53 http://security.debian.org/ jessie/updates/main libffi6 armhf 3.1-2+deb8u1 [18.8 kB]
      76. Get:54 http://security.debian.org/ jessie/updates/main libgraphite2-3 armhf 1.3.10-1~deb8u1 [73.1 kB]
      77. Get:55 http://security.debian.org/ jessie/updates/main libhcrypto4-heimdal armhf 1.6~rc2+dfsg-9+deb8u1 [100 kB]
      78. Get:56 http://httpredir.debian.org/debian/ jessie/main unzip armhf 6.0-16+deb8u3 [139 kB]
      79. Get:57 http://security.debian.org/ jessie/updates/main libheimbase1-heimdal armhf 1.6~rc2+dfsg-9+deb8u1 [46.5 kB]
      80. Get:58 http://security.debian.org/ jessie/updates/main libwind0-heimdal armhf 1.6~rc2+dfsg-9+deb8u1 [70.7 kB]
      81. Get:59 http://security.debian.org/ jessie/updates/main libhx509-5-heimdal armhf 1.6~rc2+dfsg-9+deb8u1 [113 kB]
      82. Get:60 http://security.debian.org/ jessie/updates/main libkrb5-26-heimdal armhf 1.6~rc2+dfsg-9+deb8u1 [192 kB]
      83. Get:61 http://security.debian.org/ jessie/updates/main libhdb9-heimdal armhf 1.6~rc2+dfsg-9+deb8u1 [75.3 kB]
      84. Get:62 http://security.debian.org/ jessie/updates/main libisccfg-export90 armhf 1:9.9.5.dfsg-9+deb8u12 [38.4 kB]
      85. Get:63 http://security.debian.org/ jessie/updates/main libirs-export91 armhf 1:9.9.5.dfsg-9+deb8u12 [37.0 kB]
      86. Get:64 http://security.debian.org/ jessie/updates/main libtiff5 armhf 4.0.3-12.3+deb8u4 [205 kB]
      87. Get:65 http://security.debian.org/ jessie/updates/main libwbclient0 armhf 2:4.2.14+dfsg-0+deb8u7 [118 kB]
      88. Get:66 http://security.debian.org/ jessie/updates/main samba-vfs-modules armhf 2:4.2.14+dfsg-0+deb8u7 [308 kB]
      89. Get:67 http://security.debian.org/ jessie/updates/main samba-dsdb-modules armhf 2:4.2.14+dfsg-0+deb8u7 [284 kB]
      90. Get:68 http://security.debian.org/ jessie/updates/main python-samba armhf 2:4.2.14+dfsg-0+deb8u7 [862 kB]
      91. Get:69 http://security.debian.org/ jessie/updates/main samba-libs armhf 2:4.2.14+dfsg-0+deb8u7 [4,379 kB]
      92. (Reading database ... 63279 files and directories currently installed.)2.14+dfsg-0+deb8u7 [957 kB]
      93. Preparing to unpack .../base-files_8+deb8u8_armhf.deb ...mba-common-bin armhf 2:4.2.14+dfsg-0+deb8u7 [574 kB]
      94. Get:72 http://security.debian.org/ jessie/updates/main samba-common all 2:4.2.14+dfsg-0+deb8u7 [264 kB]
      95. Get:73 http://security.debian.org/ jessie/updates/main librtmp1 armhf 2.4+20150115.gita107cef-1+deb8u1 [55.3 kB]
      96. Get:74 http://security.debian.org/ jessie/updates/main multiarch-support armhf 2.19-18+deb8u10 [181 kB]
      97. Get:75 https://openmediavault.github.io/packages/ erasmus/main openmediavault all 3.0.84 [920 kB]
      98. Get:76 http://security.debian.org/ jessie/updates/main passwd armhf 1:4.2-3+deb8u4 [935 kB]
      99. Get:77 http://apt.armbian.com/ jessie/main linux-jessie-root-next-bananapi armhf 5.31 [323 kB]
      100. Get:78 http://security.debian.org/ jessie/updates/main dnsutils armhf 1:9.9.5.dfsg-9+deb8u12 [115 kB]
      101. Get:79 http://apt.armbian.com/ jessie/main linux-u-boot-bananapi-next armhf 5.31 [191 kB]
      102. Get:80 http://security.debian.org/ jessie/updates/main bind9-host armhf 1:9.9.5.dfsg-9+deb8u12 [66.7 kB]
      103. Get:81 http://security.debian.org/ jessie/updates/main libisc95 armhf 1:9.9.5.dfsg-9+deb8u12 [154 kB]
      104. Get:82 http://apt.armbian.com/ jessie/utils sunxi-tools armhf 1.4.2-1~armbian5.31+1 [36.0 kB]
      105. Get:83 http://security.debian.org/ jessie/updates/main libdns100 armhf 1:9.9.5.dfsg-9+deb8u12 [627 kB]
      106. Get:84 http://security.debian.org/ jessie/updates/main libisccc90 armhf 1:9.9.5.dfsg-9+deb8u12 [34.9 kB]
      107. Get:85 http://security.debian.org/ jessie/updates/main libisccfg90 armhf 1:9.9.5.dfsg-9+deb8u12 [51.2 kB]
      108. Get:86 http://security.debian.org/ jessie/updates/main liblwres90 armhf 1:9.9.5.dfsg-9+deb8u12 [48.5 kB]
      109. Get:87 http://security.debian.org/ jessie/updates/main libbind9-90 armhf 1:9.9.5.dfsg-9+deb8u12 [42.3 kB]
      110. Get:88 http://security.debian.org/ jessie/updates/main locales all 2.19-18+deb8u10 [3,930 kB]
      111. Get:89 http://security.debian.org/ jessie/updates/main git-man all 1:2.1.4-2.1+deb8u3 [1,268 kB]
      112. Get:90 http://security.debian.org/ jessie/updates/main git armhf 1:2.1.4-2.1+deb8u3 [2,919 kB]
      113. Get:91 http://security.debian.org/ jessie/updates/main nginx all 1.6.2-5+deb8u5 [72.6 kB]
      114. Get:92 http://security.debian.org/ jessie/updates/main nginx-full armhf 1.6.2-5+deb8u5 [386 kB]
      115. Get:93 http://security.debian.org/ jessie/updates/main nginx-common all 1.6.2-5+deb8u5 [88.0 kB]
      116. Get:94 http://security.debian.org/ jessie/updates/main sudo armhf 1.8.10p3-1+deb8u4 [835 kB]
      117. Fetched 101 MB in 16s (6,035 kB/s)
      118. Extracting templates from packages: 100%
      119. Preconfiguring packages ...
      120. Updating configuration ...ase ...#####################################################################################################################################..] UpRestarting engine daemon ....ediavault (3.0.84) ...one.emoved; done.ml ...#############################################################################################.] Pr
      121. root@bananapi:~# reboot
      Display All

      @cyryllo: Care to replace your outdated OMV image where you most probably fiddled around manually with a link to the official one that got created from scratch, contains the performance optimizations and works?
    • tkaiser wrote:

      jessie-backports active.
      And as soon as you remove this from sources.list upgrade works flawlessly ('armbianmonitor -u' output from @'cyryllo''s broken SimpleNAS image).

      @houndhunger: you should be aware that official OMV images contain a lot of tweaks wrt both performance and 'health' (eg. enabling/improving flash-memory plugin to reduce wear on SD cards unlike the SimpleNAS images you use now). Performance comparison: Building OMV automatically for a bunch of different ARM dev boards
    • Thanks tkaiser. Working on it.

      -UPDATE-
      OK, so that was it, I forgot where to get right OMV for my Banna Pi.
      Now I have to go through all and try hard to do settings for all services I had before. Even SFTP is not working yet... Oh well, I'll get there after hours spent.

      I won't even try to fix the broken OMV 3 which I mentioned on beginning (I'll still have image saved..). I'm total Linux noob trying to run one.

      When correct settings done / found as it goes and progress - notes, notes, notes taken and screenshots... That is my way to survive next disaster, I hope.
      And ISO image of SD card for backup.

      The post was edited 1 time, last by houndhunger ().

    • Hello again,

      It is more Linux question then OMV (as half of the things disused here ;)):
      I was about to finish all settings... And very next thing tonight I was going to backup and extend partition because SD card was tight on space... I restarted Banana Pi at midday and I cannot make it boot anymore.
      My guess is that it is size related issue and something got corrupted. Is there any boot fix? If there is no simple solution, then I have to start all over AGIAN...

      The post was edited 2 times, last by houndhunger ().

    • This weekend I made a fresh install of my BananaPi. During boot and even reboot the SD has not been resized.
      I used gparted on my laptop to resize the SD. Worked without issue.
      Odroid HC2 - armbian - Seagate ST4000DM004 - OMV4.x | Asrock Q1900DC-ITX - 16GB - 2x Seagate ST3000VN000 - Intenso SSD 120GB - OMV4.x
      :!: Backup - Solutions to common problems in OMV - OMV setup videos - OMV4 Documentation :!:
    • houndhunger wrote:

      My guess is that it is size related issue and something got corrupted. Is there any boot fix?
      Without serial console output it's hard to tell.

      macom wrote:

      During boot and even reboot the SD has not been resized.
      If it's one of the images from sourceforge.net/projects/openm…s/Other%20armhf%20images/ then rootfs gets resized to 3.6 GB and a third partition using almost all the remaining space gets created. The 3.6 GB are not my idea but based on @ryecoaaron 's work for Raspberries and ODROIDs. Can you provide output from 'sudo armbianmonitor -u'?

      The post was edited 1 time, last by tkaiser ().

    • tkaiser wrote:

      The 3.6 GB are not my idea but based on @ryecoaaron 's work for Raspberries and ODROIDs.
      I arrived at that size originally when I wanted the images to work on a 4 GB SD card (with no third data partition) and I didn't have any long running OMV boxes using more 3GB. It is fine for all of my purposes but it is small for people who have plex installed.
      omv 4.1.8.2 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.9
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please read this before posting a question.
      Please don't PM for support... Too many PMs!
    • ryecoaaron wrote:

      I arrived at that size originally when I wanted the images to work on a 4 GB SD card (with no third data partition) and I didn't have any long running OMV boxes using more 3GB. It is fine for all of my purposes but it is small for people who have plex installed.
      Ok, now I understand. Armbian images have a reduced rootfs size (real size + 30%) and we resize on first boot. For the OMV variants I defined the size you used: github.com/armbian/build/blob/…ze-image.sh.template#L122

      But maybe it's better to change this in the future? On the other hand since we're getting soon more boards supported by mainline kernel I'm also thinking about switching from ext4 to btrfs with zlib compression (since space savings are nice and there's no performance drop) and then we're ending up with a fixed size rootfs anyway since I lack patience/time to test btrfs partition resize.
    • What am I doing wrong...
      I have suspicion that some bit of my hardware malfunctioning... I swap SD card for new install...
      1st I do login to OMV web interface - Update Management - click Check.
      Select all packages and hit click Upgrade.
      Message pops up "En Error cured".
      After page refresh seems like Updates will proceed but not because I'm getting "Read-only file system" messages.
      I thought it is write protection switch on SD card, but I don't know...
      I'm desperate, can't get stable start of OMV install. Not even close to be completing desired install I had.
      Is there dumb step by step install OMV 3 for Banana Pi?
    • houndhunger wrote:

      because I'm getting "Read-only file system" messages.
      Filesystem corruption most probably due to crappy/broken/counterfeit SD card. This is one of the two reasons why people struggle with SBCs: SD card crappiness and underpowering: forum.armbian.com/index.php?/a…other-people-experiences/

      Banana Pi also uses the shitty Micro USB DC-IN connector so it's a support nightmare anyway... cnx-software.com/2017/04/27/se…-boards-or-charge-phones/ (read the comments too and visit every link please)
    • So next time to go super-cheep NAS with lots of headaches for me, what do you recommend which NAS pc like Banana Pi would you recommend? And running OS from USB? I think. I like bargain solutions but I'm hitting my numb-user boundaries quite enough.
      I have googled few, but which is (ARM maybe) popular today with good support in your opinion?

      What tool would you recommend to test SD card?

      Excuse me that this thread happen to be now generic, answering my questions...
    • I have decided to go one by one package to install.
      After 9th of about 100 I have got this:

      Source Code

      1. Reading package lists...
      2. Building dependency tree...
      3. Reading state information...
      4. Suggested packages:
      5. binutils-doc
      6. The following packages will be upgraded:
      7. binutils
      8. 1 upgraded, 0 newly installed, 0 to remove and 90 not upgraded.
      9. Need to get 3537 kB of archives.
      10. After this operation, 302 kB disk space will be freed.
      11. Get:1 http://httpredir.debian.org/debian/ jessie/main binutils armhf 2.25-5+deb8u1 [3537 kB]
      12. Fetched 3537 kB in 1s (2364 kB/s)
      13. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 63300 files and directories currently installed.)
      14. Preparing to unpack .../binutils_2.25-5+deb8u1_armhf.deb ...
      15. Unpacking binutils (2.25-5+deb8u1) over (2.25-5) ...
      16. dpkg: error processing archive /var/cache/apt/archives/binutils_2.25-5+deb8u1_armhf.deb (--unpack):
      17. unable to clean up mess surrounding `./usr/share/doc/binutils/ld/ChangeLog.gz' before installing another version: Read-only file system
      18. dpkg: error while cleaning up:
      19. unable to restore backup version of `/usr/share/doc/binutils/changelog.gz': Read-only file system
      20. dpkg: error while cleaning up:
      21. unable to restore backup version of `/usr/share/doc/binutils/README.cross.gz': Read-only file system
      22. dpkg: error while cleaning up:
      23. unable to restore backup version of `/usr/share/doc/binutils/NEWS.gz': Read-only file system
      24. dpkg: error while cleaning up:
      25. unable to restore backup version of `/usr/share/doc/binutils/test-summary.gz': Read-only file system
      26. dpkg: error while cleaning up:
      27. unable to restore backup version of `/usr/share/doc/binutils/changelog.Debian.gz': Read-only file system
      28. dpkg: error while cleaning up:
      29. unable to restore backup version of `/usr/lib/ldscripts/armelf_linux_eabi.x': Read-only file system
      30. dpkg: error while cleaning up:
      31. unable to restore backup version of `/usr/lib/ldscripts/armelf_linux_eabi.xbn': Read-only file system
      32. dpkg: error while cleaning up:
      33. unable to restore backup version of `/usr/lib/ldscripts/armelf_linux_eabi.xc': Read-only file system
      34. dpkg: error while cleaning up:
      35. unable to restore backup version of `/usr/lib/ldscripts/armelf_linux_eabi.xd': Read-only file system
      36. dpkg: error while cleaning up:
      37. unable to restore backup version of `/usr/lib/ldscripts/armelf_linux_eabi.xdc': Read-only file system
      38. dpkg: error while cleaning up:
      39. unable to restore backup version of `/usr/lib/ldscripts/armelf_linux_eabi.xdw': Read-only file system
      40. dpkg: error while cleaning up:
      41. unable to restore backup version of `/usr/lib/ldscripts/armelf_linux_eabi.xn': Read-only file system
      42. dpkg: error while cleaning up:
      43. unable to restore backup version of `/usr/lib/ldscripts/armelf_linux_eabi.xr': Read-only file system
      44. dpkg: error while cleaning up:
      45. unable to restore backup version of `/usr/lib/ldscripts/armelf_linux_eabi.xs': Read-only file system
      46. dpkg: error while cleaning up:
      47. unable to restore backup version of `/usr/lib/ldscripts/armelf_linux_eabi.xsc': Read-only file system
      48. dpkg: error while cleaning up:
      49. unable to restore backup version of `/usr/lib/ldscripts/armelf_linux_eabi.xsw': Read-only file system
      50. dpkg: error while cleaning up:
      51. unable to restore backup version of `/usr/lib/ldscripts/armelf_linux_eabi.xu': Read-only file system
      52. dpkg: error while cleaning up:
      53. unable to restore backup version of `/usr/lib/ldscripts/armelf_linux_eabi.xw': Read-only file system
      54. dpkg: error while cleaning up:
      55. unable to restore backup version of `/usr/lib/ldscripts/armelfb_linux_eabi.x': Read-only file system
      56. dpkg: error while cleaning up:
      57. unable to restore backup version of `/usr/lib/ldscripts/armelfb_linux_eabi.xbn': Read-only file system
      58. dpkg: error while cleaning up:
      59. unable to restore backup version of `/usr/lib/ldscripts/armelfb_linux_eabi.xc': Read-only file system
      60. dpkg: error while cleaning up:
      61. unable to restore backup version of `/usr/lib/ldscripts/armelfb_linux_eabi.xd': Read-only file system
      62. dpkg: error while cleaning up:
      63. unable to restore backup version of `/usr/lib/ldscripts/armelfb_linux_eabi.xdc': Read-only file system
      64. dpkg: error while cleaning up:
      65. unable to restore backup version of `/usr/lib/ldscripts/armelfb_linux_eabi.xdw': Read-only file system
      66. dpkg: error while cleaning up:
      67. unable to restore backup version of `/usr/lib/ldscripts/armelfb_linux_eabi.xn': Read-only file system
      68. dpkg: error while cleaning up:
      69. unable to restore backup version of `/usr/lib/ldscripts/armelfb_linux_eabi.xr': Read-only file system
      70. dpkg: error while cleaning up:
      71. unable to restore backup version of `/usr/lib/ldscripts/armelfb_linux_eabi.xs': Read-only file system
      72. dpkg: error while cleaning up:
      73. unable to restore backup version of `/usr/lib/ldscripts/armelfb_linux_eabi.xsc': Read-only file system
      74. dpkg: error while cleaning up:
      75. unable to restore backup version of `/usr/lib/ldscripts/armelfb_linux_eabi.xsw': Read-only file system
      76. dpkg: error while cleaning up:
      77. unable to restore backup version of `/usr/lib/ldscripts/armelfb_linux_eabi.xu': Read-only file system
      78. dpkg: error while cleaning up:
      79. unable to restore backup version of `/usr/lib/ldscripts/armelfb_linux_eabi.xw': Read-only file system
      80. dpkg: error while cleaning up:
      81. unable to restore backup version of `/usr/lib/libbfd-2.25-system.so': Read-only file system
      82. dpkg: error while cleaning up:
      83. unable to restore backup version of `/usr/lib/libopcodes-2.25-system.so': Read-only file system
      84. dpkg: error while cleaning up:
      85. unable to restore backup version of `/usr/bin/objdump': Read-only file system
      86. dpkg: error while cleaning up:
      87. unable to restore backup version of `/usr/bin/ar': Read-only file system
      88. dpkg: error while cleaning up:
      89. unable to restore backup version of `/usr/bin/ranlib': Read-only file system
      90. dpkg: error while cleaning up:
      91. unable to restore backup version of `/usr/bin/objcopy': Read-only file system
      92. dpkg: error while cleaning up:
      93. unable to restore backup version of `/usr/bin/nm': Read-only file system
      94. dpkg: error while cleaning up:
      95. unable to restore backup version of `/usr/bin/strip': Read-only file system
      96. dpkg: error while cleaning up:
      97. unable to restore backup version of `/usr/bin/as': Read-only file system
      98. dpkg: error while cleaning up:
      99. unable to restore backup version of `/usr/bin/ld.gold': Read-only file system
      100. dpkg: error while cleaning up:
      101. unable to restore backup version of `/usr/bin/ld.bfd': Read-only file system
      102. dpkg: error while cleaning up:
      103. unable to restore backup version of `/usr/bin/addr2line': Read-only file system
      104. dpkg: error while cleaning up:
      105. unable to restore backup version of `/usr/bin/c++filt': Read-only file system
      106. dpkg: error while cleaning up:
      107. unable to restore backup version of `/usr/bin/dwp': Read-only file system
      108. dpkg: error while cleaning up:
      109. unable to restore backup version of `/usr/bin/elfedit': Read-only file system
      110. dpkg: error while cleaning up:
      111. unable to restore backup version of `/usr/bin/gprof': Read-only file system
      112. dpkg: error while cleaning up:
      113. unable to restore backup version of `/usr/bin/readelf': Read-only file system
      114. dpkg: error while cleaning up:
      115. unable to restore backup version of `/usr/bin/size': Read-only file system
      116. dpkg: error while cleaning up:
      117. unable to restore backup version of `/usr/bin/strings': Read-only file system
      118. dpkg: error while cleaning up:
      119. unable to securely remove '/var/lib/dpkg/tmp.ci': Read-only file system
      120. dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)
      121. dpkg: error while cleaning up:
      122. unable to securely remove '/var/lib/dpkg/reassemble.deb': Read-only file system
      123. dpkg: error: unable to create new file '/var/lib/dpkg/status-new': Read-only file system
      124. Traceback (most recent call last):
      125. File "/usr/sbin/omv-mkaptidx", line 117, in <module>
      126. '/var/lib/openmediavault/apt/upgradeindex.json'), 'w') as outfile:
      127. OSError: [Errno 30] Read-only file system: '/var/lib/openmediavault/apt/upgradeindex.json'
      128. E: Sub-process /usr/bin/dpkg returned an error code (2)
      129. E: Failed to write temporary StateFile /var/lib/apt/extended_states.tmp
      130. Done ...
      Display All
      What would you recommend?
      Temporary solution - restart... But this is not stable... I need some new HW I guess...

      The post was edited 1 time, last by houndhunger: Temporary solution ().

    • houndhunger wrote:

      What tool would you recommend to test SD card?
      The usual suspects. Just check the first paragraph here: forum.openmediavault.org/index.php/Thread/18991

      If you again and again get read-only filesystem then either your Banana is under-volted like hell (thanks to shitty Micro USB connector and 'average USB cables') or your SD card is already dying.

      If you get a genuine Samsung EVO+ then there's nothing wrong running the OS from SD card. And wrt 'NAS SBC' alternatives: ROCK64 really looks promising, same with ESPRESSOBin (though the board I bought hours ago seems to be defective :( )
    • tkaiser wrote:

      But maybe it's better to change this in the future?
      Probably. I was thinking we should target 16gb SD cards? I'm also fine with btrfs+compression. I have been using that combo on a backup drive for over a year without issues.
      omv 4.1.8.2 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.9
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please read this before posting a question.
      Please don't PM for support... Too many PMs!
    • I find out there are two micro USB connectors - one on short side next to SD card, one on long side next to SATA. I was using the one next to SD card. I swapped it and also power supply - the same "Read-only file system" report. I'll give it couple more attempts with couple more SD cards and see if reports "Read-only file system" on Upgrade (when I get home from work)