USB PICe Card that worked in 2.x not working in 3.x

  • I did a fresh install of OMV3.x, and the PCIe card that was working in 2.x is no longer working in 3.


    The main thing I am seeing is USB Bus 1 deregistered, but I cannot find anything useful about this message.


    This is vmware on a dell server with the VIA PCIe device assigned to the OMV vm.





    Code
    root@openmediavault:~# dmesg | grep -i usb
    [    0.744334] ACPI: bus type USB registered
    [    0.744357] usbcore: registered new interface driver usbfs
    [    0.744366] usbcore: registered new interface driver hub
    [    0.744381] usbcore: registered new device driver usb
    [    0.746219] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 1
    [    0.781380] xhci_hcd 0000:0b:00.0: USB bus 1 deregistered
    Code
    root@openmediavault:~# lsusb -v
    unable to initialize libusb: -99
    Code
    0b:00.0 USB controller: VIA Technologies, Inc. Device 3483 (rev 01) (prog-if 30 [XHCI])
    	Subsystem: VIA Technologies, Inc. Device 3483
    	Physical Slot: 192
    	Flags: fast devsel, IRQ 19
    	Memory at fd3ff000 (64-bit, non-prefetchable) [size=4K]
    	Capabilities: [80] Power Management version 3
    	Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit+
    	Capabilities: [c4] Express Endpoint, MSI 00
    	Capabilities: [100] Advanced Error Reporting
  • One of the following things caused the error to go away:


    1) Shut down Dell Server
    2) Opened it up, checked all the connections
    3) Changed PCIe slots
    4) Booted, enabled passthrough, rebooted
    5)
    6) Profit. Well, it works again. I am going to chalk this up to VMWare weirdness of some sort - I meant to be more methodical but the server also has the VM with the router on it, and umm, other forces at home were not happy.

  • i´m sure that was the 5)

    Scherzkeks! (Sorry, aber das konnte ich mir jetzt nicht verkneifen) :)

    OMV 3.0.100 (Gray style)

    ASRock Rack C2550D4I C0-stepping - 16GB ECC - 6x WD RED 3TB (ZFS 2x3 Striped RaidZ1) - Fractal Design Node 304 -

    3x WD80EMAZ Snapraid / MergerFS-pool via eSATA - 4-Bay ICYCube MB561U3S-4S with fan-mod

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!